Which version of the ixgbe driver is included in 5.6? I went through all the
RHEL5 release notes, but they only ever state that the driver was updated,
not which devices was added.
This device is not supported up to CentOS 5.5 (2.0.44-k2), but the latest
driver from the Intel web site works fine (3.2.10).
05:00.0 Ethernet controller: Intel Corporation Unknown device 151c (rev 01)
05:00.0 0200: 8086:151c (rev 01)
Subsystem: 8086:a03c
Flags: bus master, fast devsel, latency 0, IRQ 170
Memory at de400000 (64-bit, non-prefetchable) [size=2M]
I/O ports at ecc0 [size=32]
Memory at de3f8000 (64-bit, non-prefetchable) [size=16K]
Expansion ROM at de200000 [disabled] [size=1M]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [70] MSI-X: Enable+ Mask- TabSize=64
Capabilities: [a0] Express Endpoint IRQ 0
Capabilities: [e0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 2c-cf-9a-ff-ff-21-1b-00
Capabilities: [150] Unknown (14)
Capabilities: [160] Unknown (16)
On 04/06/2011 05:04 PM, Lars Hecking wrote:> > Which version of the ixgbe driver is included in 5.6? I went through all the > RHEL5 release notes, but they only ever state that the driver was updated, > not which devices was added.In about 4 hrs time you should be able to check for yourself :) - KB
> > Which version of the ixgbe driver is included in 5.6? I went through all > the > RHEL5 release notes, but they only ever state that the driver was > updated, > not which devices was added. > > This device is not supported up to CentOS 5.5 (2.0.44-k2), but the latest > driver from the Intel web site works fine (3.2.10).FYI current devkernel for RHEL5.7 have it at version 3.2.9-k2, so there is hope it's new enough in 5.6 for you. Simon> > 05:00.0 Ethernet controller: Intel Corporation Unknown device 151c (rev > 01) > > 05:00.0 0200: 8086:151c (rev 01) > Subsystem: 8086:a03c > Flags: bus master, fast devsel, latency 0, IRQ 170 > Memory at de400000 (64-bit, non-prefetchable) [size=2M] > I/O ports at ecc0 [size=32] > Memory at de3f8000 (64-bit, non-prefetchable) [size=16K] > Expansion ROM at de200000 [disabled] [size=1M] > Capabilities: [40] Power Management version 3 > Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 > Enable- > Capabilities: [70] MSI-X: Enable+ Mask- TabSize=64 > Capabilities: [a0] Express Endpoint IRQ 0 > Capabilities: [e0] Vital Product Data > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Device Serial Number 2c-cf-9a-ff-ff-21-1b-00 > Capabilities: [150] Unknown (14) > Capabilities: [160] Unknown (16) > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >
Lars Hecking wrote:> Which version of the ixgbe driver is included in 5.6? I went through all the > RHEL5 release notes, but they only ever state that the driver was updated, > not which devices was added. > > This device is not supported up to CentOS 5.5 (2.0.44-k2), but the latest > driver from the Intel web site works fine (3.2.10). > > 05:00.0 Ethernet controller: Intel Corporation Unknown device 151c (rev 01) > > 05:00.0 0200: 8086:151c (rev 01)Looking at the 5.6 kernel source (2.6.18-238), the file drivers/net/ixgbe/ixgbe_type.h has the line: #define IXGBE_DEV_ID_82599_T3_LOM 0x151C which part of the patch: linux-2.6-net-ixgbe-update-to-upstream-version-2-0-84-k2.patch James Pearson
On Wednesday, April 06, 2011 06:04:15 pm Lars Hecking wrote:> Which version of the ixgbe driver is included in 5.6? I went through all > the RHEL5 release notes, but they only ever state that the driver was > updated, not which devices was added. > > This device is not supported up to CentOS 5.5 (2.0.44-k2), but the latest > driver from the Intel web site works fine (3.2.10). > > 05:00.0 Ethernet controller: Intel Corporation Unknown device 151c (rev 01)This does not mean it's not supported it's just not in the pci-id database. You could try to update just the pci-db with: # update-pciids We've used 82599 on the normal 5.5 kernel no problems (2.0.44-k2). With the 5.6 kernel (-238) you get: 2.0.84-k2 Cheers, Peter> 05:00.0 0200: 8086:151c (rev 01) > Subsystem: 8086:a03c > Flags: bus master, fast devsel, latency 0, IRQ 170... -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: <http://lists.centos.org/pipermail/centos/attachments/20110406/a259eff5/attachment-0005.sig>
> This does not mean it's not supported it's just not in the pci-id database. > You could try to update just the pci-db with: > # update-pciidsCool! 05:00.0 Ethernet controller: Intel Corporation 82599EB 10 Gigabit TN Network Connection (rev 01)> We've used 82599 on the normal 5.5 kernel no problems (2.0.44-k2). With the > 5.6 kernel (-238) you get: 2.0.84-k2Does not seem to work with our variant. CentOS driver: ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.44-k2 ixgbe: Copyright (c) 1999-2010 Intel Corporation. Intel driver: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.2.10-NAPI Copyright (c) 1999-2010 Intel Corporation. GSI 25 sharing vector 0xAA and IRQ 25 ACPI: PCI Interrupt 0000:05:00.0[B] -> GSI 39 (level, low) -> IRQ 170 PCI: Setting latency timer of device 0000:05:00.0 to 64 ixgbe: 0000:05:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 16, Tx Queue count = 1 ixgbe: eth2: ixgbe_probe: No DCA provider found. Please start ioatdma for DCA functionality. ixgbe: eth2: ixgbe_probe: (PCI Express:5.0Gb/s:Width x4) 00:1b:21:9a:cf:2c ixgbe: eth2: ixgbe_probe: MAC: 2, PHY: 2, PBA No: G21371-001 ixgbe: eth2: ixgbe_probe: GRO is enabled ixgbe: eth2: ixgbe_probe: HW RSC is enabled ixgbe: eth2: ixgbe_probe: Intel(R) 10 Gigabit Network Connection