similar to: my domUs have a slow network rate for outside networks.

Hi, We are running on 5.5 on a HP ProLiant DL360 G6. Kernel version is 2.6.18-194.17.1.el5 (we had also tested with the latest available kernel kernel-2.6.18-238.1.1.el5.x86_64) We running some performance tests using the "iperf" utility. We are seeing very bad and inconsistent performance on the UDP testing. The maximum we could get, was 440 Mbits/sec, and it varies from 250 to 440

I'm trying to setup a LVM mirror on 2 iSCS targets, but can't. I have added both /dev/sda & /dev/sdb to the LVM-RAID PV, and both have 500GB space. [root at HP-DL360 by-path]# pvscan PV /dev/cciss/c0d0p2 VG LVM lvm2 [136.59 GB / 2.69 GB free] PV /dev/sda VG LVM-RAID lvm2 [500.00 GB / 490.00 GB free] PV /dev/sdb VG LVM-RAID lvm2 [502.70 GB /

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

i'm running on vmware system and HP proliant DL360 G5 servers on wmware, on boot i have the following message: ----------------------------- Applying Intel Microcode update: don't know to make device "cpu/microcode" [OK] ----------------------------- and on a HP proliant DL360 G5 server , on boot i have too the following message: ----------------------------- Applying

Kristian, I have 2 X100P cards but neither work on my Compaq DL360 G2. The system will not even boot! Take a look at my initial post and let me know if you have any other advice. Regardless, thanks for your post! ------------------------------------------------------------------------ - I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel

Hi, I''m trying to boot a HP dl360 G5 from via iSCSI from a solaris 10 u4 zfs device but it''s failing the login at boot: POST messages from the dl360: Starting iSCSI boot option rom initialization... Connecting.connected. Logging in...error - failing. Interestingly (and correctly) the authentication method is set to none. I''ve looked at a TCP capture and the box

hi again, for the install of redhat on hp 1000r and a compaq dl360 at boot i have different version for the boot agent: hp 1000r: boot agent 4.0.14 PXE 2.0 build 082 compaq dl360: boot agent 4.0.17 PXE 2.0 build 083 Does someone know if there is a problem with this version? How can i update this boot agent? well the hp 1000r can't find the dhcp server?

The syslinux at linux.kernel.org mailing list is obsolete; use syslinux at zytor.com. pierre-yves.verdon wrote: > hi again, > for the install of redhat on hp 1000r and a compaq dl360 > at boot i have different version for the boot agent: > > hp 1000r: > boot agent 4.0.14 > PXE 2.0 build 082 > > compaq dl360: > boot agent 4.0.17 >

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

Hi all, Just a couple of quick questions. I have a HP DL360 G4 (dual 3.0Ghzprocessors). The processors are EM64T. I am using a TE411P in the system. 1. Should I run the a x86_64 Linux (CentOS) or just go with the plain old 32 bit version? 2. This being a dual processor system, should I turn on or off hyper thrreading? Thanks..... -------------- next part -------------- An HTML attachment was

Hello I''ve setuped a bridge with l7-filter and ipp2p. We have every day + or - between 10Mbits and 30 Mbits P2P traffic from + or - 450 customers. When traffic increase. I''ve got this kind of error message : Feb 23 14:26:19 gestor1 kernel: printk: 38 messages suppressed. Feb 23 14:26:19 gestor1 kernel: ip_conntrack: table full, dropping packet. The server is celeron

Hi all, Does anyone know how to determine which file system a disk was formatted with, if fdisk -l doesn't show it? usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: Model: Rev: Type: Direct-Access ANSI SCSI revision: 02 sd 7:0:0:0: Attached scsi disk sda sd 7:0:0:0: Attached scsi generic

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Guys, I'll be building a couple of DL360 G4p & DL380 G4 boxes soon and I've not dealt extensively (i.e. at all) with any PC stuff that hasn't been i386. I know the DL line pretty well but it was all G2/3. So, question is, do I stick CentOS i386 or x86_64 on them? 2 boxes x 2GB RAM and 1 x 4GB, all SMP. Will.

I have purchased a used Compaq DL360 which I was going to use as a proxy server. Presently, we are using a cheap box with ipcop which is working fine but it didn't have much RAM (64MB), etc. This new box we will want to run squid and perhaps dansguardian for filtering (this is a non-profit company) and I'm wondering if I should just put ipcop on it or would it be smarter/better to install

Hi, I am trying to find m breakpoints of a linear regression model. I used the segmented package. It works fine for small number of predicators and breakpoints.(3 r.v. 3 points). However, my model has 14 variables it even would not work even for just one breakpoints!. The error message is always estimated breakpoints are out of range. Since my problem is time related problem. So I

Hello! Has anyone seen this netfilter kernel crash? Images from the console of the crashed firewall: http://pasik.reaktio.net/centos5-kernel-crash/ Firewall is HP DL360 G4 server running CentOS 5.x 32 bit. I've seen this firewall crashing multiple times, but I only started investigating it lately.. It has happened using CentOS 5.0, 5.1 and now also with 5.2. I'm not sure if it was