similar to: Ability to pass-through a PCI videocard & PCI USB card?

Hi All, This might be a stupid question, but I have two PCI devices that I want to pass-thru to a PV domU. I can pass one of them, but not both. I''m sure it''s a stupid syntax issue within my configuration file. When I do a "lspci" in the domU, (CentOS 5.1), only one of the devices shows up. (e.g.) 00:00.0 Multimedia video controller: Internext Compression Inc

I know most of the motherboards based off of the Intel Q35 northbridge usually have VT-d options for it to be enabled or disabled in the BIOS.  I''ve heard the same for Intel 5400''s and Intel 3200/3210''s but been looking through manuals for various server boards and don''t see VT-d options in the BIOS. However, I was wondering if anyone had success stories or

Hi All, I was hoping to pick someone''s brain about the best way of moving a Xen disk image (which has LVM''s inside of it) to a new block-device?  I have the target DRBD device ready but unsure what''s the best & safest way to do it. I was actually tempted to mount the Xen disk image in a dom0, and make it visible via loop devices and promote that DRBD node for

Hi All, I apologize in advance if this strays too far from the etiquette on the Xen userlist, however the amount of help, brainpower and experience I''ve received from this list with Xen and "peripheral" related issues (i.e. DRBD) have been worth more than it''s weight on gold and I''m hoping someone will be kind enough to give me a "best practices"

Dear all, I am using GNU screen to run multiple R sessions from one working directory in order to split task, however I noticed that dataset is not synchronized e.g. if I have two sessions R1 and R2, and I remove an object from R1, R2 doesn't change as expected or change at random. I have tried to save.image(), q() and then restart both sessions, but it does not help. Any suggestions?

Dear all, i''m having problems passing a Hauppage Nova-S2 card to my DomU (Mythtv Backend). Hardware is: HP XW8200 2x 3.0GHz Xeon 8Gb ECC Ram 1x TT3200-S2 card 1x DVBWordl S2 card 1x Nova-S2 card [many other card for other domUs...] Dom0 is Ubuntu 8.04 server LTS. Xen 3.2 from repo. DomU (Mythtv) is a 8.04 (using LVM) both using 2.6.24-23-xen kernels Dom0 configs: lspci: ... 02:01.0

Im running wine 1.01 and i have Nvidia GeForce 9800GT with Nvidia driver version 185.18.36 on ubuntu jaunty When i try to run games thru wine, i often get messeges about my videocard having to low memory or that i dont have direct3d, hardware 3d acceleration etc etc... I have installed many things thru winetricks such as DriectX 9, .NET, VB etc etc Still Wine doesnt get my videocard drivers... I

Is it possible to install WINE with a 2D only videocard?? I have a chipset that is not supported by Linux and I fear it will never be, I have an SIS 760/761 integrated chipset this chipset is known not to have any 3D support what so ever. I can't slap in a new video card because it's in a laptop and to my knowledge there is no way to put a new videocard into the laptop, so I am hoping

Apparently, this hang can be fixed at small performance cost by setting NOUVEAU_VP3_DEBUG_FENCE 1 (as opposed to default 0) in https://cgit.freedesktop.org/mesa/mesa/tree/src/gallium/drivers/nouveau/nouveau_vp3_video.h Now, what exactly fixes my hangs (or make them less severe) - still open question, guess I can flip few of those debug defines and try to find out ... Currently at mesa Mesa

Hi All, I have a USB-HID compatible UPS which is connected to my dom0 (CentOS 5.1) which is being monitored.  I have a bunch of domU''s of various OS''es, and was wondering if anyone has a solution to send the "state" of the UPS to the domU''s (read-only).  I''d like that in the event of a power-outage and the UPS''s batteries are low that before

Folks - Any ideas on why I can''t pass a pair of HVR-1600 PCI cards to a single DomU? When I try, only a single one shows up. I can pass them to separate DomUs (though I''m having problems getting the one in the second DomU to capture properly, it does show up and gets recognized by the driver for it). Distro: Ubuntu 12.04.1 LTS Kernel: ubuntu stock 3.2.0-31-generic #50 xen:

Hi everyone, i''m currently try migrate my mythtv-server into an xen maschine but the ivtv-driver for my Hauppauge PVR350 doesn''t work. Now, a lot of googling and reading later i''m now here. I''ve an error which i can''t exactly allocate: is it an driver or an xen generated error ? I got with the ivtv-drivers following error: (0.2.x ivtv driver)

I keep getting errors in my logs about can not bind to address *.*.*.*:53 address in use.. what did i do wrong in the setup of my server or domain? attached logs and smb.conf along with the output from my provision command. Jeffrey D. Means meaje at meanspc.com Owner / CIO for MeansPC http://www.meanspc.com/ Custom Web Development For Your Needs. (970)308-1298 - The

Did the upgrade by chance install/alter any udev rules causing the UPS devices to now have incorrect permissions? And what user is nut running as? On November 9, 2024 9:58:57 AM EST, Bill Gee <bgee at campercaver.net> wrote: >Running NUT version 2.8.2 on Fedora 40. NUT installed from the Fedora package. CyberPower CP1000AVRLCD connected by USB. > >I updated the system yesterday

Nut should be running as user nut. As far as I can tell, the udev rules have not changed. And the system IS seeing the UPS at a low level. I looked through /dev/ but did not see a device that jumps out as the UPS. ===================== [root at mythtv rules.d]# dmesg | grep -i 0764 [ 2.021485] usb 1-1.8: New USB device found, idVendor=0764, idProduct=0501, bcdDevice= 0.01 [ 2.049515]

Check /dev/hidraw6, as noted in your dmesg output (and any other *hid* devices under /dev). User nut has almost zero privs to devices unless a udev rule changes the perms on the dev for nut . . . On November 9, 2024 1:25:29 PM EST, Bill Gee <bgee at campercaver.net> wrote: >Nut should be running as user nut. As far as I can tell, the udev rules have not changed. And the system IS

Running NUT version 2.8.2 on Fedora 40. NUT installed from the Fedora package. CyberPower CP1000AVRLCD connected by USB. I updated the system yesterday with all the latest Fedora packages. Now NUT will not run. Chasing the issue through the layers, I come to this: ===================== [root at mythtv rules.d]# upsc cyberpower Error: Driver not connected [root at mythtv rules.d]#

Is there anyway to get gigabit networking for a fully virtualized guest? I''ve tried searching for this one, but all I get are results about gigabit networking for the host / dom0, nothing for domU. Thanks, Gordon _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I've had fun with nut on RH systems, these are my notes to get it working: Create /usr/lib/tmpfiles.d/nut-client.conf:D? ? /run/nut 0770 root nut - ...the file did not exist, and so the PID folder/file was not getting generated. Then the driver would start. Also had to setup enabled services (still not 100% confident that this is totally correct):[root at emp80 ups]# systemctl list-unit-files

can anyone advise on where to find the mythtv repo? I have dag but a yum install mythtv-suite yields nothing thanks