similar to: arp who-has not answered

Hello. Browsing accross subnets fails because "route2-3" can't sync its local browse list with the domain master browser "classix", which is also the WINS server. Everything else is fine. There is 1 and only 1 WINS server (classix) and no NT server. The error message in nmb log of route2-3 is: ==================================

Managed to implement this on asterisk v1.4.24.1, Also, Hangupcause updating to user field. However, this only works on the edge of my voice network (demarcation point) It does not work on my internal routing boxes as I use IAX to route between remote sites. I was thinking of using some sort of SIP variables to transport these results over the IAX trunk.. Any bright ideas folks???

Greetings list, Over the last few days I've been gearing up to replace a couple of our servers with 1.6 as something of a testbed, but I'm encountering a few problems, and wondering if anyone can help... In extensions.conf, there are a number of contexts defined for each group of users, along the lines of: [groupa] [groupb] etc. In each of those, there's a command include =>

Hey, I am having the problem that when looking at my virtual network interface stats all packets are shown as dropped (The guests all do have a working internet connection though). All the guests are running Debian Lenny with Kernel version 2.6.26-2-amd64 and running as HVM. The host is running Debian Lenny with the stable-2.6.32.x git kernel.

Hello, I''ve read the FAQ and searched the mailing list but have been unable to resolve my issue with networking in DomUs. The following things I CAN do: +SSH from within DomU to Dom0 +SSH from within DomU to all other DomUs on the same machine +SSH to other machines from within Dom0 +SSH from within DomU to other machines +SSH from other machines to Dom0 (and use the xm commands to

Hi, Thank you Guus, I think the /16 solution is the easier to apply so I modified my tinc-up in host A to be like #!/bin/sh ifconfig $INTERFACE 192.168.10.1 netmask 255.255.0.0 a route -a from HOST A shows: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 178.62.128.1 0.0.0.0 UG 0 0 0 eth0 10.129.0.0

Hi, I''ve been trying to setup 2 DSL links in the office, both on the same firewall/router/gateway. the firewall is running kernel 2.6.11 (custom built on debian). this is the network diagram: 150.101.124.y/29 (internode''s gw) | | |150.101.124.x/29 (eth2)

Hello all: I''ve got a confusing issue. I had a working shorewall configuration (based on the two interface model) using DNAT for redirection to my HTTP server. The HTTP server is on my inside network (I know - bad juju, but one thing at a time). I changed my configuration this morning to use views in my BIND (named) configuration. Everyone outside the firewall is able to get in

Hello all, I am new to Linux Ethernet bridging. Let me first start with what I am trying to achieve. Well you see - I am attempting to have 2 main firewall running at the same time - one as a master and the other one as a slave. Yes, I would like to make use of Ethernet bridging in this scenario - as I understand it, all I need are two machines and STP enabled. I am running Debian

Hi, after trying for days I ended up with a working tinc configurazion of 2 subnets, now my goal is to add 2 more subnets and comunicate. I might seem dumb at this point but honestly I don't work in IT or Networking stuff, and so I dont have that deep knowledge. A little explanation of my configuration is HOST A (VPN server) Public IP: 1.2.3.4 tun0 Subnet = 192.168.10.0/24 tun0 IP =

I'm using a bunch of SPA942's, and I'm trying to provision them mostly by DHCP (and what I can't set that way, I try to provision via HTTP interface into the phone). I changed the domain in my AstLinux config from "astlinux" to redfish-solutions.com, and set that in my sip.conf file as well: context=incoming

Hello all, We have a somewhat unique setup whereby our default router is outside of the local network. Let us say our network is 192.168.10.0/255.255.255.0 So we have a route-eth0 file that looks something like this: 10.1.1.1 via 192.168.10.1 dev eth0 default 10.1.1.1 dev eth0 The last definition would simply not take - but it has to for the setup to work. And no, 192.168.10.1 does not

Hello @all, thanks for all the helpfull answers in this mailing list. They helped me compiling a new kernel 2.6.10.11 with Xen 2.0.6 (my first one), setting up a dom0 with RAID, LVM and loop devices for domU, integrating a second network as xen-br1 (I''m calling the /etc/xen/scripts/network script from within /etc/init.d/xend to bring up / down the second bridge.) and bootstrapping

Samba not responding to broadcast calls from networked PCs. Short: My Redhat Linux 8.0 box is not replying to udp broadcasts, and I can't figure out why. Network: The offending Redhat 8.0 Linux Box (//DS) attempting to run Samba 2.2.7 Firewall Redhat 7.3 (//IW) successfully running Samba 2.2.4 Win98 (//MS) Win2k (//SL) <Not running at the time of these tests> Very long: I've

Hi! I''m testing IPSec tunnels, having the following test schemma: Host A - eth0: 192.168.1.67 eth1: 192.168.10.1 Host B - eth0: 192.168.1.254 eth1: 192.168.20.1 I''ve succesfully configured an IPSec tunnel in order to safely communicate from 192.168.10.0/24 (which is obviously behind Host A), and 192.168.20.0/24 (obviously behind Host B) In this test

I just tried to setup another domain on a server running 1 domain. When i try to start the domain it gives me an error Error: Device 0 (vif) could not be connected. Backend device not found. The entry in my xen config file for the disks is disk = [''phy:/dev/xen001/xen2-fun,sda1,w'',''phy:/dev/xen001/xen2-fun-swap,sda2,w''] Looking at /var/log/xend.log, i found

Hi All... I'm trying to get the intercom feature working on some snom 190 phones but having no luck... As you can see from the SIP trace below (from the called phone), intercom=true is being appended to the To: header as per requirements. I've email'd snom a few days ago but have yet to get a response. On my 190s, im running snom190-SIP 3.57v. I am pulling the config for the

Hi I am trying to enable my dhcpd and pxelinux setup to use a specific config file for a booting client. I have read the pxelinux page for this (http://syslinux.zytor.com/pxe.php#special) but still seem to be encountering problems. When running the dhcpd with the '-d' debug option the daemon sees the DHCPDISCOVER from the client and then core dumps. On the client side the DHCPDISCOVER

Hi all, I have setup two multipath route tables on my system for doing failover routing, What I want it''s that if GW at route1 of the MP is dead, traffic goes by route2, for doing that I have created the multipath routes as follows: ip route add table mail.traffic proto static nexthop via ${GW1} dev eth1 weight 1 nexthop via ${GW2} dev eth1 weight 250 But it does not run as I

Hi, I am running OpenVPN where i have one central hub VPN server, and multiple spoke VPN clients. I can ping from each client to the server and each client to computers on the subnet which the server resides (192.168.2.0/24) so it works ok there. I cannot however, ping from one client to another client. I guess the packet path would go: clienta -> vpn -> shorewall/router -> vpn ->