similar to: Network issue in dom0

Hi, I ''ve got a CentOS 5.2 server running xen 3.0 with 2 DomUs also running CentOS 5.2. All my boxes are up-to date. I''m experiencing trouble with networking. Dom0 can reach the outside world when no DomU are started. It can also reach the outside world when only one DomU is running. The troubles begin when I start the second DomU. At first, this new DomU, called DomU2,

Hi All, I want to test REMUS over XEN, I would like to know the basic steps to be followed . I have installed xen4.1 on debian and i didn''t find any command related to remus, is there any steps which i have to carry out? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hey guys, Has anyone had much success with XCP and Open Stack together? I''m in the process of putting together a open stack test cluster and I thought I might be able to use XCP dom0''s for it.. but to be honest it doesn''t look so good. I tried following these instructions on a separate XCP test machine: http://wiki.openstack.org/XenServerDevelopment At a first test

I''m needing to put a network card on a test server XCP 1.0. I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I base that on which version to look for a compatible card? If the kernel is the same as in 5.6.0 FP1, but if the version of XCP uses the hypervisor 3.4.2 neither appears on the list. ps: I had a RTL-8169 but stopped working with update 0.5

On Wed, May 25, 2011 at 12:41 AM, JAMES BOND 123 007 <james123007@gmail.com> wrote: > Hi , > I saw your thread post at > http://web.archiveorange.com/archive/v/ZvO4jnaavtTfcyqnHoRX > , about problems with XEN 4.0 installation. > I have the same problem and my machine is similar to yours( HP Proliant > DL380G6, 4GB-RAM) This question is better asked on the xen-users list.

Hello, I have a Gentoo Linux guest, which was working very well with the past xm tool stack. Since the migration to xen-4.1.1 and to the new xl tool stack, I have a problem for the IP assignation. Actually, when dhcpcd starts at boot time the IP address is not correctly assigned. This also happens if I perform "dhcpcd eth0" once I''ve accessed to the guest shell. I

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by

I would like to install XCP. So I started at http://www.xen.org/products/index.html and found the section labeled ''Xen Cloud Platform Project'' This section was a nice overview but no links to docs or downloads. The next section was labeled ''USERS'' which had a download link to ''Xen Cloud Platform 1.5 Beta Download''

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

Hello everybody! My server with Ubuntu Hardy Heron x64 with Xen 3.2 hangs on when booting at "Starting local boot scripts (/etc/rc.local)". My /etc/rc.local is default and I can''t find out why it stops there. It''s possible to SSH to the server and everything works fine. I just can''t do anything from the physical server. I''ve googled but nothing have

Hi, I''m doing some testing on Ubuntu 12.04 Alpha. All sounds comes out as static on the Dom0 system. (I can PCI passthrough the audio card to a DomU and that works). Native sound works fine. Linux kronos 3.2.0-8-generic-pae #15-Ubuntu SMP Wed Jan 11 15:34:57 UTC 2012 i686 i686 i386 GNU/Linux Here is the "ubuntu-bug audio" generated report:

Hi list readers, I am an experienced developer with only nominal configuration talent. These days, mostly I use ubuntu linux, but have used Debian, WhiteBox, CentOS, RH, Fedora. I have been using Sun VirtualBox to very great effect and hope for better performance by installing and using xen. I also intend to use Dom0 exclusively as a host, and not install any other packages. Instead, I expect to

So Working on CEntOS 5 I am trying to sett up Xen with 2 bridges, one that connects dom0 and most of the domU to the physical card and the out to the network. Got that figured out no problem, now i want to have a second bridge that runs a local network for all the doms that doesn''t connect to the network. With code I have found used in multiple places I can easily get 2 bridges, and

I am using Xen 3.3 from source. My PV guest boots fine with the normal kernel and initrd options When I boot the guest with PV GRUB I only get: GNU GRUB version 0.97 (65536K lower / 0K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible

Hi List, is it possible with the virt-manager to choose a drbd device? Example: 9:testsever Connected Primary/Secondary UpToDate/UpToDate C is running on /dev/sda9 but I can´t use it as a drive. (syntax?) Best, Mike _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I''m still trying to figure out how to get my Xen installation on a 34-CPU machine (8 quad cores) to recognize more than one CPU per socket. It seems to default to one CPU per socket on this machine. Win2003ServerEnterprise will support 8 quad cores (32 CPUs) in a native install, but I can''t fathom why it won''t when installed under Xen (OpenSuSE11.0). Thanks for any

Does Xen Cloud Platform (XCP) support the notion of a driver domain? I can assign a VIF to a domain, but it seems that I can only attach that VIF to a network. What I''d like to do is attach the front-end VIF in one domain to a backend running in another domain. The second domain will control the physical interface (via PCI passthrough). This use case is easily supported using Xen +

Hi everyone, I have some question about the Xenopsd. I’ve read the wiki document but cannot understand where to use it, Is this different with XAPI ? What’s the main work for? Can anyone describe it more clearly about it? Thanks a lot!! _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hi @all, I have many domU on my server and they work fine, some of them have their own NICs with the PCI param in the config. Now I try to bring a soundcard for asterisk into a new domU and have the following trouble: rz3-ta:~ # lspci 00:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) PCI: Enabling device 0000:00:00.0 (0000 -> 0001) EMU10K1_Audigy: probe of 0000:00:00.0