similar to: Processor architecture

Hi there, I am new to Xen. Just began trying it out from day-before. I have a CentOS 4.4 install on my hda6 partition. And I have a openSUSE 10.2 install on my hda8 partition. For openSUSE 10.2, I chose the Xen options while installing, and so I have the xen kernels too installed. For CentOS 4.4, I downloaded the Xen 3.0.2 source and compiled from there. (I followed the instructions at this

Thanks you all guys. I am able to create the RHEL5 PVM on RHEL5 host successfully. Only thing that i need to add is /mnt/etc/fstab in inintrd command and preload to both the fronthend drivers. As blow. # mount /home/disk /mnt # mkinirtd /boot//boot/initrd-2.6.18-8.el5xenU.img 2.6.18-8.el5xen --fstab /mnt/ etc/fstab --with xenblk --with xennet --preload xenblk --preload xennet Thanks a lot,

Hi *, as this is my first post I want to say hello to everybody. Well, and unfortunatly I''ve already got a question for you: I''ve installed a guest domain (OS: CentOS 4) on my xen-machine and it''s para-virtualised (just to provide the information ;) ). After the installation and mount the image containing the guest to copy the necessary modules for the xen-kernel,

Hi there, we have a problem with dahdi and overlapdial. We are running an E1 in Germany and are in need of overlapdial. The E1 is connected to a Sangoma A101. As soon as overlapdial is set to "yes" we have problems with incoming audio on the dahdi channels. When set to "no" all audio is fine. Basically we can choose between being able to receive calls or to place calls

Hi, I have started the xen kernel with parameter dom0_mem=300M. xm info | grep total total_memory : 2045 Name ID Mem VCPUs State Time(s) Domain-0 0 300 2 r----- 292.1 FTP 822 1 56.7 LDAP 1 822 1 r----- 541.3 NFS1 822 1 14.8 NFS2 822 1 1.4 For the

Hello list, when using Xen on our Bladecenter with the advanced management module everything works fine, but as soon as I switch the KVM to another blade and then switch back to xen machine, vga output is unavailable (due to wrong resolution or hz frequency? But it works if I don''t switch away). The machine itself works, only vga output is gone after switching kvm away from the box.

Hello everybody, I am in the process of setting up a really cool xen serverfarm. Backend storage will be an LVMed AoE-device on top of DRBD. The goal is to have the backend storage completely redundant. Picture: |RAID| |RAID| |DRBD1| <----> |DRBD2| \ / |VMAC| | AoE | |global LVM VG| / | \ |Dom0a| |Dom0b| |Dom0c| | |

In config file, ''*type=ioemu*'' is added with vif . Does it make the difference if we don''t add. Because i did not notice any difference in para as well as full virtulization. Same as in case of exporting the disk to Guest dom. Is it just a placeholder or else ? Second thing, I am running RHEL3 as a HVM DomU on xen-3.0.4. Every thing works fine, but i had a problem to

Hi Xen Users, Anybody read this book. Could anybody tell me how this would be helpful and what points it covers ? http://www.amazon.com/Professional-XEN-Virtualization-William-Hagen/dp/0470138114 Thanks, Trilok _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I have been tied up with other work and Holidays. Now back to some server work that is long overdue. I lost an old server yesterday so it is crunch time. I believe my new platform is suppose to be an x86_64. The order form says 64 bit. I booted Centos 6.3 i386 liveCD to check the system out before an install. uname -i reports i386 dmidecode -t processor reports Characteristics of 64

Hello everybody, I am running 1.2.10-BRIstuffed-0.3.0-PRE-1s with florz-patches on Linux 2.6.16 with 4 HFC-Cards in TE-mode connected to 4 PtP ISDN-"Anlagenanschluesse". There are about 40 SIP-clients connected (mostly Sipura/Linksys PAP2, and some SNOMs and softclients) to this server. Everything works fine, except that my CDR reports some very long _concurrent_ calls from one sip

Hello, attached is a little guide (in mediawiki notation) how to cleanly install xen 3.1.0 on debian etch amd64. Suggestions welcome! Regards, Bjoern _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, On Centos is it possible to read the processor ID from any File ? Regards, Premraj M Disclaimer : This message is proprietary to Smartlink Network Systems Ltd. and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have

Hi Could anybody explain me how to check how many L1/L2 cache my cpu have. I'm using CentOS 5.6 *cat /proc/cpuinfo |grep CPU * model name : Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz model name : Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Diagram of a generic dual-core processor, with CPU-local level 1 caches, and a shared, on-die level 2 cache.

Hi Erwan, First off, many thanks for your wonderful addition to syslinux: dmitest.c32 and another thankyou to hpa for it's inclusion. I need to ask if you are missing a couple of definitions in dmi_processor.h, specifically, the "long mode" flag. I need to use this flag to determine whether a machine is 64-bit capable or not. There is a great web page explaining the "long

Hi Group ... havin'' read whatever I could "google" on this topic, I didn`t find any solution: openSuSE 10.2 (out of the box), xenkernel, running on HP Proliant DL360G5 (dual internal networking, plus additional 4-port adapter) gives me eth0 - eth5, but only peth0 - peth3 (as well as vif0 - vif3 and consequentely xenbr0 - xenbr3). I increased the number of loopback-devices

Don't get the CPU information from libvirt, because including libvirt and all dependencies in the virt-p2v ISO bloats everything. Instead get most of the information we need from the util-linux program 'lscpu'. Unfortunately the CPU model cannot be retrieved. Example output: $ ./run virt-p2v --cmdline="p2v.dump_config_and_exit" [...] cpu vendor . . . Intel cpu

I would like to use R.oo and tcltk to implement a Turtle World. I have encountered many problems because: 1) I am not sure how to implement static fields with R.oo 2) I am not sure how to implement a constructor that would call a function only for the first instance of a class (i.e., to initialize value of static fields only once) 3) I am not sure how to remove/delete cleanly existing

Hi How can I know the hardware info eg: type of memory No need to turn off the machine Thank you

Dear R friends- I'm attempting to generate a regression tree with one gradient predictor and multiple responses, trying to test if change in size (turtle.data$Clength) acts as a single predictor of ten multiple diet taxa abundances (prey.data) Neither rpart or mvpart seem to allow me to do multiple responses. (Or if they can, I'm not using the functions properly.) > library(rpart)