similar to: Xen 3.1 + CentOS 5 + HP ProLiant G5 = DomU packet drops

Hey, I am having the problem that when looking at my virtual network interface stats all packets are shown as dropped (The guests all do have a working internet connection though). All the guests are running Debian Lenny with Kernel version 2.6.26-2-amd64 and running as HVM. The host is running Debian Lenny with the stable-2.6.32.x git kernel.

I totally agree with Luc Boudreau about this problem. On modern branded server they ALL use Broadcom chipset... I must admit that: a) lot of people are experiencing the problem but can tolerate it or b) someone already experienced this problem and solved it Lets'' approach the problem pragmatically... just start with a survey on the list. ... hope we solve this issue soon. Ivan

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if exit

Hi folks, We use CentOS 5.2 (with latest errata) 64bit on DL380 G5 and trying to install psp-8.11.rhel5.x86_64.en.tar.gz. After installing dependencies (like kernel-devel, rpm-devel, etc): # ./install811.sh Saving user-defined agent thresholds... [ Done ] Checking system for required packages... [ Done ] ./hpplduioss: error while loading shared

Hello, I'm trying to boot a HP Proliant DL320 G5 with a HP Smart Array E200i RAID card (latest BIOS and latest RAID card firmware). With menu.c32 or vesamenu.c32 from syslinux 3.50 the system hangs Booting from local disk... PXE-M0F Exiting With the latest dev version (3.52-pre) it hangs with : vesamenu.c32: attempted DOS system call The issue has already been reported but

Hello Everyone, I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is, if

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

I have a new x3655 IBM and whenever the /etc/xen/scripts/network-bridge script starts, the ethernet would no longer work. This post isn''t about the cause, but the fix. I did a lot of tcpdumps and Googling, but I''ll spare you that. All they do is prove that yes, there is an issue. :) I tried Debian 4.0 i386/amd64 and Ubuntu 7.04 Server i386/amd64 and they all exhibit the

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

I have for every VM in "xm top" a Net1 item. And there is a lot of drops on these packets. So what is this Net1 item, do i need to disable something?   Do i need this? vmdebianamd64 --b---       1107    0.1     260576    6.2     262144       6.3     1    2   815618   829664    1       17   288 253   754981    0 Net0 RX: 849569343bytes  4083414pkts        0err       42drop  TX:

Hi all, I have been trying to solve nouveau issues on my iMac G5 for ages. As far as I can understand it, there is a problem with nouveau and page size mapping. I tried both 64K and 4K page size kernels and the the result is always distorted video. There is an old To-Do list, which says "fix the page size mapping problem on G5/64 bit for exposing fifo regs" on

I am considering a G5/XServe for a conferencing system. I need to put a TDM card in the machine for timing. Is anyone out there using Asterisk on Mac with zaptel drivers? I am looking at using Linux for the OS. If so what is your experience? Have a great day! Geoff

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

Hi! Does anyone know if there is a working 64-bit version of R for MacOs X on G5? If so, is there a memory limit anyway or could I theroetically use almost 8 GB in one session? Best regards Anders Sj??gren PhD Student Mathematical Statistics Chalmers University of Technology G??teborg, Sweden

I suspect screen tearing (as it's usually defined) is to be expected. Can you take a photo of what you're seeing, since I'm suspecting it's more than regular screen tearing? On Mon, Jun 22, 2020 at 12:08 PM Jeroen Diederen <jjhdiederen at zonnet.nl> wrote: > > Hi Ilia, > > I experience screen tearing for both 64k and 4k page size. > My iMac G5 has an nVidia

OK. That's not tearing. That's like a bad pitch on an image. (Presumably you only find the second image, IMG_1968.jpg, problematic?) I'm guessing you're using a GL-based compositor, which I fully expect to work poorly. Please try a non-compositing or XRender-based compositing environment. Cheers, -ilia On Mon, Jun 22, 2020 at 2:15 PM Jeroen Diederen <jjhdiederen at