similar to: Compatibility HP Proliant ML350 G4p for Xen 4

Guys, I'll be building a couple of DL360 G4p & DL380 G4 boxes soon and I've not dealt extensively (i.e. at all) with any PC stuff that hasn't been i386. I know the DL line pretty well but it was all G2/3. So, question is, do I stick CentOS i386 or x86_64 on them? 2 boxes x 2GB RAM and 1 x 4GB, all SMP. Will.

We bought a Compaq ML350 G5. When trying to install Centos, I got the message: No disk installed. and centos suggest me a list of drivers, but none of them seems to work. Has anybody tried this? Any help would be appreciated. carlos -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have been trying to install CentOS 5.1, 5.2,and 5.3 and the HP server but to no success. It starts loading well the on trying to load the cciss driver, the machine hangs there and refuses to move on. Any help will help quite alot. Thanks

> Hi All, > > My PXE configurations works fine for a bios PXE (the server in legacy > mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi > but not the next one ldlinux.e64 > > > Any ideas? > > Thanks > Latest updates (including firmware) for the HP ML350 Gen9 were released on 2014DEC19 (v1.21); I would suggest double-checking

Hi All, My PXE configurations works fine for a bios PXE (the server in legacy mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi but not the next one ldlinux.e64 Any ideas? Thanks Software> syslinux ver 6.3 atftp 7.1 Log server side >> Booting Embedded LOM 1 Port 1 : HP Ethernet 1Gb 4-port 331i Adapter - NIC (PXE IPv4) >> Booting PXE over

Hi Xen Users, Anybody read this book. Could anybody tell me how this would be helpful and what points it covers ? http://www.amazon.com/Professional-XEN-Virtualization-William-Hagen/dp/0470138114 Thanks, Trilok _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is, if

Hello List, I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot, and found (very old, many years ago) messages saying these

All, I installed Vista on Xen yesterday, but it no longer shows up on my Admin console. Disk space still shows 30G used by it. Also, how do I eject CDROM while Xen is running :) Thanks, Andrey _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

On Thu, Mar 5, 2015 at 2:03 PM, Jorge Cisneros via Syslinux <syslinux at zytor.com> wrote: > Hi All, > > My PXE configurations works fine for a bios PXE (the server in legacy > mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi > but not the next one ldlinux.e64 > > > Any ideas? My latest personally-published binaries.

I have 3 machines, T60 thinkpad with e1000 NIC Dell PowerEdge 2950 with bnx2 NIC HP DL360 G4P with tg3 NIC All running xen 3.03 / 2.6.16.29-xen I have a netbootable image with 2.6.16.29-xenU. This image when it boots creates a vlan eth0.4002, and then tries to communicate on that interface to a central server. On the machines with e1000 an bnx2 NICs, this works fine. On the

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network (pinging) no responce on console (key pressing) the only way to get

Hi, we''ll start virtualization with Xen in our company and we''re looking for the right distribution. The most important Servers in DomUs are working with a MS OS (Win2000/2003/2008). I''ve read something about to accelerate Windows with paravirtual drivers in some distributions. Other distributions have specific tools to install and support DomUs. And now I''m

hi guys, after installing centos on my ml350 i found 2 choices on the grub options. CENTOS-4 i386 (2.6.9-22.ELsmp) CENTOS-4 i386-up (2.6.9-22.EL) what choice will i choose ? --------------------------------- Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new and used cars. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, I have recently installed CentOS 6.3 with QEMU+KVM for Virtualization. I have successfully created a Windows 2003 VM with 4GB of RAM. The host server is an HP ML350 G8 with 24GB RAM and 24 cores. Details of one of the cores is shown below: processor : 23 vendor_id : GenuineIntel cpu family : 6 model : 45 model name : Intel(R) Xeon(R) CPU E5-2620 0 @

Is anyone successfully running asterisk on an HP proliant while using their management software, hpasm? I have two DL360's and two TE220B's. The cards have their own IRQ's. No matter what combination of settings I use, the cards fail the patlooptest if hpasm (ver 7.9.1) is running. If I stop it the cards pass the test. I really want to run the management software, so I'd

Thanks to debugging information from Thomas Mieslinger, I have root-caused the failure of chain.c32 in Syslinux 3.85. I have put out Syslinux 3.86-pre1 and Syslinux 4.00-pre33 which fix the problem. I expect to release a Syslinux 3.86 relatively shortly (ideally in the next two weeks), with bug fixes only. I would like to figure out if there are other bug fixes we can get in in reasonable time,

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the

At my university we use HP hardware exclusively. When we build CentOS our Unix SA is running several HP utilities. I am wondering what some of these utilities are, such as cmaidad. Is it possible to to use these HP utilities to monitor for disk crashes (similar to smartd)? Is anyone using native HP utilities for this purpose? TIA