similar to: hopping LAN-IF on Windows Server 2003 DomU

Hello, I''m new to Xen (and this mailing-list) and facing some problems with the network. I''m stuck and don''t know how to continue. And Google isn''t very helpful either... My setup: - Ubuntu 7.10 for dom0 and Debian 4.0 for all domU - 4 physical NIC (DHCP from my ISP, internal LAN, DMZ & WLAN) - 1 Dom as firewall/router - 1 domU with internal services

Hello all, I have a Xen server with 6 network interfaces, I want a bridge on all of them. I use a personal network script like this : #!/bin/bash dir=$(dirname "$0") "$dir/network-bridge" "$@" vifnum=0 netdev=eth0 bridge=xenbr0 "$dir/network-bridge" "$@" vifnum=1 netdev=eth1 bridge=xenbr1 "$dir/network-bridge" "$@"

Hi, I''m using Xen 3.0.3 on two servers with Debian Etch (amd64). These servers have 10 nics (2 onboard and 8 in two 4-port cards) so that every vm can have its own interface. This worked so far with the Xen Version from Etch with a wrapper script wich started 10 bridges at boot time. But now I''ve updated Xen on one of these server to Xen 3.2.0 from backports.org and now the

I have a OpenSuse 10.3 with xen 3.1.0 running and it''s been running fine for a few months. This past weekend it suddenly started to act up and after some troubleshooting I can now say that it seems like the guests(domU) loose the outgoing network pipe, from the console I can see that the TX counter is stuck at the same value but it''s no errors. It behaves as if whatever I try to

Hello all, I''m using Red Hat Enterprise Linux 5 (with RH Virtualization) and a Dell Poweredge 2950 with 10 NICs. My virtual operating systems are all RHEL4, and I''ve installed 4 instances. I''m trying to set up the virtual operating systems so that the physical NICs are allocated to certain operating systems. Using the following tutorial:

Hi all, I''m searching for a tutorial how to setup multiple network cards with xen network bridge setup in debian lenny. My problem is, bridges seams only to work if i put an ip adress in dom0 to them. Thanks, Alex _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, we''re running 4 xen servers on our network with multiple network cards. During HighLoad we experince degeneration of inbound network traffic through our loadbalancer. I might found a reason for it, in Dom0 dmesg output looks as follows: [1157421.975910] eth0: received packet with own address as source address [1157421.975957] eth0: received packet with own address as source

Hello, We are planning to install a Windows 2008 DomU in one of our servers (SUSE 10/SP2, XEN 3.2). Does someone have some experience in installing 2008 ? Are they some know problems (and solutions if possible) to success in thre process. Here is the setup we will use for that DomU : ------------------------------------------------------------------- # SR3 MV9 name="SAP-IDES-ECC"

Hi @all, I tried to setup xen 3.3 on centos 5 Update 2. I used the following packages: http://bderzhavets.blogspot.com/2008/08/install-xen-3.html The server has 4 physical network interfaces and i want to use them all. eth0 => only for host (configured with static ip) eth1 => first vm (configured with static ip) eth2 => second vm (configured with static ip) eth3 => all other vm

Hello, Where can I find a link (or docs) to *working* network config for xen 4.1.2? My tests (s. below) were not successful. Thank you in advance for any hints. Regards, Mark # --- root@xen411dom0:~# cat /etc/network/interfaces # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or # /usr/share/doc/ifupdown/examples for more information. auto lo iface lo inet loopback auto bond0

Dear, I''ve attempted to upgrade a Xen box from 3.1.2 to 3.2.1. Unfortunately it has been a partial success only. At this point I''m really stuck with a network problem that affects my HVM machines (Linux PV run fine). The really odd thing is that everything seems to work properly, except that the "vif" network interfaces in dom0 seem to have only dropped TX packets for

Hallo! I am using on a system based on Debian GNU/Linux Etch on AMD64 platform Linux and Solaris running in a HVM domU but they both seem to be 32bit environments. I know so because 64bit Linux didnt boot and said something about am I trying to run it in 32 bit environment; and because i had to install 32bit Oracle because 64bit Oracle said it expected BIT_SIZE=64 and got BIT_SIZE=32. And also,

Hi! I have a problem with my new Xen setup. I have installed Debian etch with netinstall and I''m using 2.6.18-6-xen-amd64 kernel in my dom0 and 3.0.3-0-4 version xen hypervisor. I''m using four network cards on my system and using three of them as xen bridges and dom0 is using the fourth one only for it''s own. So basicly both of my virtual servers use a network card

Hi I'm very new with Xen (/Debian) I have 2 VMs running Windows: "Arch" and "Sql" -- static IPs VM Arch: is ok, accessible thru VNC, Remote Desktop, see the network, etc VM Sql : - just accessible thru VNC             - once I log in, I don't see the network             - pings don't reach peer             - appear 4 network ports on Windows the server has 4

Just thought I'd pass along that I have successfully installed FreeBSD 7.0 into a Xen 3.1 HVM. ?This one went as smooth as I expected, considering my experience with 6.3. ?Haven't done any benchmarking or stress testing or port installs or anything. ?But so far it's working nicely. Here's all the info. ?If you'd like to see anything else, let me know. Host hardware: ?

Hi, I've been using CentOS & Xen on a server that has 2 VM's configured. The default configuration includes one physical iface that is propagated (by a default bridge) to the VM's. Since I wanted to configure additional physical iface, define a new bridge and propagate it to the viface-s of the VM's, i configured the bridge/phys. iface and brought it up (here are

Hi, In one of our xen server, I am using two bonding. bond0 : Is for trunk, where the vlans are attached , port eth0 & eth1 is attached to bond0 bond1 : eth2 & eth3 are attached to bond1, where physical ip has been set . In the /etc/xen/xend-config.sxp, I am using (network-script *multi-network-bridge*) , the

Hi, I am facing issues after upgrading one of the server from rhel5.5. (86_64) to latest rhel5.7 (86_64). The server is under trunk configuraion. I have set the network bridge as follows: #!/bin/bash vconfig set_name_type DEV_PLUS_VID_NO_PAD dir=$(dirname " $0" /etc/xen/scripts/network-bridge $@ vifnum=1 bridge=xenbr2 netdev=bond0.10 /etc/xen/scripts/network-bridge $@

Hi, I seem to have an interesting issue with vif-route. This is after an update to Xen 4.2.1, switching from xm to xl. I have 10 PV domUs on the host and two FreeBSD ones. All the PV domUs are now working nicely. Since FreeBSD has always been just slightly broken as PV I chose a HVM domU for those, but with PV drivers. Those PV drivers all blew up now after the upgrade. I''m now trying

Hi, I have installed xen 3.0.3 on gentoo 2006.1 The machine is a laptop with amd turion x2 ML-60. I can boot into xen, xend stars normally. When I try to boot a linux livecd using HVM, there is no network interface (I used several different linux distributions). It''s not a driver problem, since the hardware is not even listed on dmesg log. While booting the livecd there is a message :