similar to: Domain Crash and Xend can''t restart

Hi, I have a v2000 compaq laptop. The realtek network and USB on this machine was not working. After adding to grub.conf "acpi=off apci=off noacpi noapic" the v2000 realtek started working and the USB worked fine... Fantastic! So I thought I would try those same options on my r4000 laptop. they had no effect.... This AMD turion 64 4000+ rating laptop is still running SLOWWW...

I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other

All. I am running Xen on an ES7000 system with 4 procs and 4 GB memory. I am running Suse Sles-9 (32-bit) on the machine. I have compiled Xen (the tip on the unstable tree : 6552) with PAE enabled (XEN_TARGET_X86_PAE=y). The system boots fine. I started xend and when I tried to bring up a virtual machine, the system gave me the following error on the command line. On the serial port, I saw an

During boot of dom0, I get the following. Box is remote, so I''m now waiting for proxy power button pusher ;-) tg3 init fails doing dma_alloc_coherent (I assume this is from tg3_init_one -> tg3_test_dma -> pci_alloc_consistent -> dma_alloc_coherent). Looks like an issue with the amount of memory in dom0. Is this known? thanks, -chris root (hd0,0) Filesystem type is ext2fs,

After a couple hours last night.... doing a "killall -SIGUSR1 cpuspeed" bumps up the /proc/cpuinfo information for cpu mhz to 2393 Mhz. I did notice a little increase after that. However, the machine is still sluggish. I did a "hdparm -c 1 /dev/hda" but really did not notice any difference. I tried to download fglrx64_6_8_0_8.16.20-1.x86_64.rpm from ati (also 8.20.8) and get

Hi, I''m using CentOS 5.5 x86_64 xen 3.43 from gitco.de and I have an Openvox A1200P voip card and am passing it thru to another centos 5.5 DomU, when I 1st start the domain driver loads and everything seems quite nice and the device works, but after a reboor of the DomU, this is shown on my Dom0 dmesg Here''s Dom0 info [root@xen ~]# dmesg Bootdata ok (command line is ro

Hi, I''m using CentOS 5.5 x86_64 xen 3.43 from gitco.de and I have an Openvox A1200P voip card and am passing it thru to another centos 5.5 DomU, when I 1st start the domain driver loads and everything seems quite nice and the device works, but after a reboor of the DomU, this is shown on my Dom0 dmesg Here''s Dom0 info [root@xen ~]# dmesg Bootdata ok (command line is ro

It seems that VCPU system time isn''t monotonic (using 3.0.4). It seems it might be correlated to when a VCPU is switched across real CPUs but I haven''t conclusively proved that. But e.g.: { old = { time = { version = 0x4ec pad0 = 0xe8e0 tsc_timestamp = 0x22cc8398b7194 system_time =

Hi, I have problem installing or running domU OS (Windows XP or Redhat 7.3). The machine runs CentOS 4.4 X86_64, Xen-3.0.3. Paravirtual domU works without problem. The problem is that when I run command "xm create <config>", nothing would happen. hvmloader does not seem get started at all. I''ve tried installing both 64bit and 32bit vnc, sdl but did not see any

Hello, yesterday night I had a problem with my server located at a hoster (strato.de). I couldn't ssh to it and over the remote serial console I saw "out of memory" errors (sorry, don't have the text). Then I had reinstall CentOS 5.5/64 bit + all my setup (2h work), because I have a contract with a social network and they will shut down my little card game if it is not

Hi everyone, I'm having trouble adding error bars to a grouped barchart in lattice. I know that this topic has been addressed quite a bit, as I've been searching the internet for a while to try to troubleshoot the issue, but I've not been able to find any solution that I could get working on my data. I was wondering if someone could look at my code and tell me what I'm doing

We've just started getting this. We're running 5.10, kernel 2.6.32-358.18.1.el6.x86_64. Anyone else seen anything like this, or have any ideas? mark Nov 1 14:34:21 <server> kernel: WARNING: at block/ll_rw_blk.c:543 blk_do_ordered() Nov 1 14:34:21 <server> kernel: Nov 1 14:34:21 <server> kernel: Call Trace: Nov 1 14:34:22 <server> kernel:

Hi, I noticed the earlier thread on this started by Scott Koranda (sorry - was reading off gmane so I can''t reply to thread) I have exactly the same symptoms: machine hangs as soon as I attempt to start a single domU, just after emitting "using config file..." At that point the machine appears completely wedged. The sequence of 3 ^A on the console no longer does

Hello, I originally posted this to xen-users, but someone suggested I post it here. I am having ACPI problems on a PenguinComputing Altus1600 system. It has 2x dual core Opteron 2210 processors. The system boots with a standard Debian or Ubuntu SMP kernel, with ACPI enabled. However the xen live cd, binary xen install, as well as my own custom compile of xen 3.0.4 from source will not boot.

Hi all, I experienced for a second time the crash of asterisk process during the night. Nothing in Asterisk messages logs, nothing in /var/log/messages can explain that. Maybe someone experienced something similar and can drive me in the resolution ? Regards, A.L -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm geting this message from virt-manager. Server: SuperMicro X8SIL with INTEL X3440 Here is my logs /var/log/dmesg: Bootdata ok (command line is ro root=/dev/md2) Linux version 2.6.18-194.3.1.el5xen (mockbuild at builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13 13:49:53 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 -

Hi, When I tested pvfb, I got the following warnings. It seems to be caused by checking/setting info->dirty without dirty_lock. We need to check/set info->dirty safely. xenfb_update_screen bogus rect 2147483647 0 2147483647 0 BUG: warning at /root/linux-2.6.18-xen.hg/drivers/xen/fbfront/xenfb.c:240/xenfb_update_screen() Call Trace: [<ffffffff8036920e>] xenfb_thread+0x19b/0x2be

hi: I had installed Xen-2.0.6 on my server DELL 2850 with 6G memory, dual Xeon CPU, it''s can''t use all 6G memory, i had upgrade to Xen-unstable, it''s still can use 3.3G memory. [root@CentOS4 ~]# xm dmesg __ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ ''_ \ |_ \| | | |__ / _`

hi: I had installed Xen-2.0.6 on my server DELL 2850 with 6G memory, dual Xeon CPU, it''s can''t use all 6G memory, i had upgrade to Xen-unstable, it''s still can use 3.3G memory. [root@CentOS4 ~]# xm dmesg __ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ ''_ \ |_ \| | | |__ / _`

Not sure if this is a Fedora Core 6 issue. I already post a message on their list but didn''t get an answer. So I am going to try here.. Does anyone has Windows Guest OS running successfully with the Dom0 has all the physical memory allocated? If I don''t lower the memory assign to Dom0 through grub, I will not be able to run a Windows Guest OS. This what I got Using