similar to: How to set up real network cards?

Hi all, i have a question. I''m going to setup a Xen server for a client. It''s going to serve about 25 clients. It''s a Athlon 64 3200+, which currently runs Debian i386-stable and xen 2.0.7 until Xen 3.0 is stable enough, and then i''m gonna replace it with Debian amd64-stable and Xen 3.0. The Xen dom''s consists of: Samba , file printer sharing most

Hi, I have a problem with file transfers between a windows systems and unix systems. I have one win32 desktop (intel e6400 2Gb Ram), one win32 laptop (p-m 2Ghz). Also one linux laptop (p-m 1.4GHz) and one opensolaris desktop (intel e4400 1GB Ram). The two laptops have built-in 100Mbit ethernet and desktops have 1Gbit ethernet on the motherboard. Both desktops use a Marvell Yukon. The file

He Everyone, We found out that till version 3.02 the Yukon nic is supported after it gives code errors, i'm working a lot with ehtherboot via drbl / clonezilla, and together with Steven Shiau we ask you guys if you can arrange that the Yukon can be supported again. Our thanx in advance. Dave & Steven

Hi Yum has just updated 5 of my Linux boxes running CentOS 4.3 to the 2.6.9-42 kernel. All is well on four of the boxes, but on the fifth the network card (eth0) will not work. I've downgraded the kernel to the previous version and the network card works fine again. I've tried removing and re-installing the new kernel, but the network card won't work with it. The details of the

Hello, recently I've installed 7.0 and now I'm observing strange thing with my Internet connection. Access to some sites may be VERY slow or doesn't work at all with different kinds of timeout messages or without messages at all (but other sites works fine). For example, firefox may say "Transferring data from..." message and then "The connection to the server was reset

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

Hi all, I'm seeing slow transfers to/from my samba server. I just tried to copy a 270MB file from a samba share to an XP machine. At first, the estimated time displayed as 141 minutes :( The odd thing is that if I then flood-ping from the server (in this case, I pinged my dsl router), the transfer completes in about 10 seconds. Hitting F5 repeatedly when browsing a share on the server

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

I am experiencing poor network performance on Dom0. When i ping other hosts on the same LAN, packets are out of order, and they show response times ranging from < 1 ms to several seconds, and some packets get lost. For example, a typical ping result looks like this: 87 packets transmitted, 80 received, +3 errors, 8% packet loss, time 86038ms rtt min/avg/max/mdev =

I''ve been trying for several days to get a xen dom0 booting as described on Boris Derzhavets blog. I have been able to boot Jeremy Fitzhardinge''s pv_ops kernel under xen, but my X server wouldn''t start so I''ve been trying to get Andrew Lyon''s rebased opensuse patches to work. I have asked for help in the freenode ##xen channel but they

Hello, I have this problem - I have installation of Xen and Centos 5 (all RPMs are from Centos repositories). I have several DomU virtual machines running on this machine. When I try to copy some bigger amount of data from another physical computer to Dom0/DomU on this machine, the network freezes. The link is still up, I can see that the connection really links on the switch, but nothing is

I'm new to the lists so sorry about any faux pas I may have made. Also I apologize for the length, but I wanted to be sure I covered most of the details. I'm trying to do a PXE install on an Intel 1435VP2 server machine. The PXE install has worked on all the older machines in the cluster, so I know PXE is working. However, these new Intel server machines only support PXE booting from

Hi All, I have bfu''ed to net-virt_xb-21_snv_81_021308. The dladm command on my machine does not have create-etherstub option. Please let me know what could be the issue. Thanks Khushal

I have a CentOS 5.8 box that is dropping packets (just from ping). The network is 8139 RTL-8139/8139C/8139C+ Rev 10 Adding the parameters "pci=noacpi acpi=off " has helped but it still happens. Is there something else that helps the network not drop packets? Thanks, jerry

host and guest both centos 5.5 network is 192.168.62.40 host is setup as follows [root at cloud2 ~]# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:64:12:10:D9 inet addr:192.168.62.199 Bcast:192.168.63.255 Mask:255.255.254.0 inet6 addr: fe80::21a:64ff:fe12:10d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1705488

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that

Hi : I am trying to do PCIe passthrough on HVM domu. I have window XP as a HVM domu and xen-4.0. dom0 and domU (without device assign) works fine. I have more than one NIC card. I want to passthrough 03:00.0 to domu here are the list of my nic cards: lspci | grep -i eth 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

Thanks Anna, this was also quite interesting for me. Did you mean that I just have to eliminate the else branch or raise arround "All devices behind the uppermost PCI/PCI-X bridge must be co-assigned to the same guest." or do I have to eliminate more in order to prevent an FLR (whatever that is). For my board it''s definitely necessary to move PCI devices in different guests,

Hi! I''ve 5 DSL routers and a linux router in a switch. The linux router is doing NAT for a LAN network, but it freezes when I set up load balancing with this command: ip route add default proto static\ nexthop via 192.168.1.10 dev eth1\ nexthop via 192.168.1.20 dev eth1\ nexthop via 192.168.1.30 dev eth1\ nexthop via 192.168.1.40 dev eth1\ nexthop

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : ???????