similar to: Forwarded USB brokenness

I''ve been trying for several days to get a xen dom0 booting as described on Boris Derzhavets blog. I have been able to boot Jeremy Fitzhardinge''s pv_ops kernel under xen, but my X server wouldn''t start so I''ve been trying to get Andrew Lyon''s rebased opensuse patches to work. I have asked for help in the freenode ##xen channel but they

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Hi, is it possible to use a usb isdn modem in a guest, I''m using the standard xen on SLES10. Which changes should I make in the guest config file? The modem is a usb isdn modem from fritz. Regards Marcus _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hi, I am having periodic sound clicks (2-3 per second) on all FXS of a TDM400P when the remote end is my VoIP provider. However: - recording the conversation on the asterisk, does not have the glitches, although I can hear them on a real phone. - My VoIP provider to my VoIP phones through the same asterisk is OK. - TDM to TDM through the same asterisk is OK. I tried with and without

I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other

hi list, I am happy being able to report, that I got winxp finally to run on my system. I have an ASUS T5600 Core 2 Duo with 1 Gig memory and SATA. Until the todays "apt-get dist-upgrade" I was''t able to get any graphical output out of the SDL-Window, but now it is thete and simply works, wonderful ! I attached my system info. Big thank to the xen-team and the debian people !

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

https://bugs.freedesktop.org/show_bug.cgi?id=42672 Bug #: 42672 Summary: NMI SERR with 2 Geforce 310 cards Classification: Unclassified Product: xorg Version: 7.7 (2011) Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

Thanks to the kind person(s) who worked on this. I am using PCI passthrough right now and it works. I hope support is added for VT domains too; That would be extremely useful. So far I have tried a NIC, USB, and PCI Video. The NIC works flawlessly. USB works as long as the devices are present at the time the domain is started. Hotplugging USB devices seems not to work. If I open

lspci dont show Digium card. The motherboard is Intel 945gnt. 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02) 00:02.0 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev

Hello. Trying 3.0.3 xen with hvm virtualization it run into an issue that an win 2003 host does install in text mode, but after first reboot only a black screen is greeting me ( after 2 noticable resolution changes ). Win 2000 works fine. hvm config: import os, re arch = os.uname()[4] if re.search(''64'', arch): arch_libdir = ''lib64'' else:

Hi, Earlier this day I started a thread about Skype not working with outgoing sound. Now I wonder if it's not a problem with my soundcard. I had a vague suspicion about this, but since it's way off the original topic, I decided to start a new thread about this. Here's what the soundcard looks like: [root at grossebertha etc]# lspci | grep -i audio 00:1b.0 Audio device: Intel

I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x

I need to set up the sound card of a server to use in an overhead paging system, as normal I am testing this on my home machine first (which has slightly different Hardware). I'm using chan_alsa with the Intel HD Audio driver on an Intel 82801G (ICH7 Family) sound card. I am running Asterisk 1.4.17 and have a fully loaded TDM400P as a timing source. When calling console/dsp (using

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

I've got a HP dv8000 laptop. Setting up the wpi driver for wireless freezes the system on boot with the following error: wpi0 requested unsupported memory range wpi0: could not allocate memory resource It lists a pcbi device (pcbi4 i think) and an actual memory range, but since I have to reboot using kernel.old the /var/run/dmesg.boot is wiped with the info. Is there anyway to grab the

On Tue, Oct 14, 2008 at 09:52:09PM -0400, John R. Huston wrote: > Hi, I am not very familiar with using mailing lists so if I have made > a mistake in the format or scope of the message please correct me. I > am pretty desperate for an answer by now so any help at all is really > very appreciated. > > I have a Shuttle SD30G2 computer (Specs: >

Hi there, I have been looking at a system which has the Intel ICH7 south bridge. Whenever I try to probe the SMBus on this system with 'smbmsg -p', I get a lot of status=41 timeout messages in dmesg from the ichsmb(4) driver. I have been given the addresses of the SMBus peripherals and have tried initiating reads to their register space directly using 'smbmsg', with the same