similar to: Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging problem

I am having the same problem. But, I cannot access to the following link for solution http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround Can someone send me the content of this link? Thanks. Pete, This may be relevant: http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround - Mike At 8/18/2006 09:40 AM Friday, Peter McEvoy wrote: Hi, I''ve run

I make some networking performance tests for Linux 3.10.13 #1 SMP is that normal Linux (pktget) ----> Linux (router) ----> Linux (Sink) eth0: 0.00 P/s 652024.78 P/s 652024.78 P/s eth1: 652175.58 P/s 2.98 P/s 652178.55 P/s with echo 0 >/proc/sys/net/bridge/bridge-nf-call-iptables CPU is about 2% with echo 1

Hi, I have a Dell PowerEdge 1950 with two NICs Broadcom NetXtreme II BCM5708 1000Base-T. I installed CentOS 5.1 and Xen 3.0.3 (RPM). One of my virtual machines has Windows 2003 Server. In this virtual machine my NICs appears like "Realtek RTL8139 Family PCI Fast Ethernet NIC". The problem is that when I ping to other machines sometimes the reply time value is very high: C:>

Hello list, I have two differents installation Xen Hypervisor on two identical physical server, on the same switch : The problem is on my new server (Xen 4.0.1 with pvops kernel 2.6.32.24), I have bad performance on bandwidth I have test with a files copy and "iperf". Result iperf average: Transfert Bandwidth XEN-A -> Windows

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi, I browsed the mailinglist and saw the Wiki, disabled the management features using FreeDOS. I''m using the 1.9.1 firmware. ...still the bridge kills the interface. Is there a solution for the problem? Stefan -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla -

Hi, I hope someone can help me, I cannot seem to get a system's ethernet interface to correctly work in promiscuous mode... I have a Centos 6.4 system with 2 bnx2 interfaces on it. I have set up eth1 in promiscuous mode and am sending traffic to it using the port mirroring configuration on a Nortel 3510-24T switch. The switch reports that it is sending a fair amount of traffic to the

I have a new x3655 IBM and whenever the /etc/xen/scripts/network-bridge script starts, the ethernet would no longer work. This post isn''t about the cause, but the fix. I did a lot of tcpdumps and Googling, but I''ll spare you that. All they do is prove that yes, there is an issue. :) I tried Debian 4.0 i386/amd64 and Ubuntu 7.04 Server i386/amd64 and they all exhibit the

CentOS Errata and Enhancement Advisory 2012:0503 Upstream details at : https://rhn.redhat.com/errata/RHEA-2012-0503.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f3e5f2464668879f1ef68d69583cfbe2552a99d51aa30da285938144a3c4ba2a kmod-bnx2-2.2.1-1.el6_2.i686.rpm x86_64:

This sounds kind of like what happened with me for earlier attempts at using syslinux. Skip using HPA's tools entirely and dd if=vmlinuz of=/dev/fd0 bs=1440k count=1 and make sure that the kernel runs from a floppy disk. There'll be no file system or anything, but you'll make sure that your kernel isn't faulty. If it doesn't execute, then you can avoid the syslinux/pxelinux

Hello all. We recently purchased HP Proliant DL380 G7 server and also a HP Lefthand P4500 G2 24TB iSCSI box. The server itself has Quad Ethernet based on the BCM5709 Chipset from Broadcom (NetXtreme II). My main question is about iSCSI offload mechanism, as iSCSI itself is pretty new to me but I have gotten a good hold on it tho. I have managed to setup and configured our Lefthand box into

Hi all! We use pxelinux for booting a diskless Linux from whitch we install all our systems. But we discovered some Problems: - With v1.75 the Kernel is fetched from the TFTP-Server with no problem, but it gets not started on Broadcom NetXtreme with newer PXE-Bioses - With v2.04, pxelinux even seems not to be able to fetch the kernel from the TFTP-Server. This affects also Intel's

Hoping someone else has seen this before. I have a few dozen Dell R610 systems with CentOS 5.2 that are using kernels from 5.3 and 5.4 (2.6.18-128.1.10.el5 & 2.6.18-164.6.1.el5), that at random lose layer 2 network connectivity either partially or totally. Running tcpdump on the interface reveals only ARP broadcasts, no responses. Switch reports no packets being received on the interface.

Hi, i test a xen-patched kernel 2.6.31.10 (kernel from kernel.org with the suse patches) on a system with a boradcom net extreme II (5709) nic using the module bnx2. The nic does not run with this kernel. I get: bnx2 0000:01:00.0: map irq failed Any experiences? Best Regards - Michael Schmidt _______________________________________________ Xen-users mailing list

Hi Well we are now using HP instead of Dell and have hit a major hurdle. We dont seem to be able to kix any of these boxes. I have been most recently trying on a dl585 and the issue appears to be that the kix kernel does not detect any nic. Its strange as the box can be installed using iso's and the nic appears as eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz

I''ve idendified the problem... description: problem in XEN bridged-network. Dom0 doesn''t respond at external network activity (DomUs may work correctly) problem: something related to Broadcom NetXtreme II menagement solution: follow all this instructions: http://article.gmane.org/gmane.linux.hardware.dell.poweredge/23276 bye, s.

Hello All, I have one CentOS 6 KVM virtualization server that I built around a year ago (best I can tell it was in October 2012) at which time I would have been installing 6.3 [0]. That particular install used the Consistent Network Device Naming [1] conventions (PCIe NICs are p1p1, p1p2). I started to build out a new KVM virt server (kickstarting a 6.4 install now as compared to 6.3 back then)

Does anyone have some tips for setting up Broadcom's 802.3AD support or just getting their driver compiled / installed? First off, I noticed redhat claims the broadcom bcm5708 driver has been added to the rhel4 kernel. But I don't see /proc/net/nicinfo which broadcom claims the driver creates when it's successfully initialized. So, I'm trying to build the driver based on the

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hi all, I have a problem when from domU I need to configure a network interface. My system configuration is the next: dom0: xen 3.4.3 with 2.6.18-238.9.1.el5xen kernel, making pci back from a network card. All ok. This is the result from "lspci -v -s 09:00.0" 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) Subsystem: Broadcom

Hi, I have been playing this weekend with bonding on PCI netcards and found that all of netcards I have, but old 3com, do not support MII. So bonding is not going to happen with them. Do you have some pci netcards supporting MII successfully running on bonging? Thanks, David Hrb??