similar to: vethX dont start

Valued Colleagues, I am trying to configure and use asterisk manager API. The /etc/asterisk/manager.conf and the output of "netstat -nl" are appended below. When I restart asterisk, I believe I should be able to see the asterisk listening on port 5038 using netstat. But when I type netstat, I don't see any applications listening on port 5038. When I telnet to port

Hello, Problem: Debian(linux-image-xen-686) Dom0 does not boot from LSI MegaRaid I''m sorry, because I don''t know if I''m at the right place to ask for a solution for my problem, because it might be Debian related. Nethertheless I try: Xen Kernel are in Debian Unstable for a month or so. I''m running an Etch (testing) machine here and I wanted to try out

Still trying to make my VMs appear on a subnet of their very own and route traffic to/from them from the Dom0. This network-multinet script sounds ideal for what I want: http://thepenguinpriest.com/linux/scripts/network-multinet.html However, the description of building a routed network says I need to call the script and give it the "virtual ethernet device (vethX)" that lives in

Hi, I''ve a working xen 3.0.2 booting a gentoo linux on Dom0. I have setup a Windows XP in a DomU OK with no problems except the network!! My problem is that I wanted to give a working network interface on the DomU and the best I could. making the windows detect an network adapter, was putting: vif = [''type=ioemu''] I also tryied: vif = [''type=ioemu,

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

Hi my friends, I am running into a problem with my NIC. [root@xxxx ~]# ifup eth0 Error for wireless request "Set Encode" (8B2A) : SET failed on device eth0 ; No such device. SIOCGIFFLAGS: No such device Failed to bring up eth0. eth0 is not a wireless device. Below are some information about my host: [root@xxxx ~]# lspci |grep -i ether 00:04.0 Ethernet controller: Intel Corporation

Hi, I have a couple of dual Xeon 3.0GHZ machines. Both have 4GB of memory. I''m trying to get them to boot Xen stable/2.0.6 (have tried 2.0.5 as well). Because they are remote, getting error messages can be tricky. When ''noreboot'' is set in grubs conf, they stop after the ''scrubbing free RAM'' message. If I remove the noreboot, I''m told a

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

> That''s great, except when you need *two* bridges, for two > independent subnets, and there is no, as far as I can see, peth1. You can have multiple vethX interfaces on recent builds -- see netback/loopback.c. I think the current default is a rather miserly 1 (and should be increased), but can be set on the command line. Ian > Em Wednesday 14 September 2005 16:30, John

Hi, I was hoping someone on this forums could help me out with a problem I was facing with Xen. When I compiled the kernel for Xen-3.1.3 using "make world"(I know this is an old version but I need to use it for some compatibility issues), the kernel was missing the Xen netloop module. There was no /kernel/drivers/xen/netback/netloop.ko in the newly compiled kernel. I think we would

Hello, I have a Dell PowerEdge 2850 that periodically (6 times in the last 24 hours) freezes, requiring a power cycle in order to come back. The machine is running a Xen 2.0 stable source install. Here is the appropriate Grub entry: title Xen 2.0 / XenLinux 2.6 kernel /boot/xen-2.0.gz dom0_mem=131072 module /boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0 Dom0 boots happily, and new

Hi ! I have install the xen4+centos5 on my server following the post of the kernel version is 2.6.32.27 which is download from git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git But after I reboot the server ,and run the "ifconfig", whose output likes the following [root@localhost scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:C5:EB:96:C3

Hi, I am having great difficulties in getting pci passthrough with VTd to work, surely I am doing something stupid but I cannot see what. "tangram" (https://www.blogger.com/profile/06588030231546523539) has been a huge help, but despite his efforts I am still stuck. Hardware: Intel S3200SHV motherboard BIOS : S3200X38.86B.00.00.0052 CPU : Intel Core 2

Greetings. When I "pull" data from server A to server B, with nfs, server B reports a high load when viewed via uptime. The load is upwards of 6.x. Server A's load remains light. When I "push" the data, server A's and B's loads are relatively light. When I change the mount point from nfs to cifs, I don't see this problem. I also don't have this

Already reported.... http://bugs.centos.org/view.php?id=2516 >Subject: RE: [CentOS-virt] xenbr0 isn't created anymore >To: <centos-virt at centos.org> >Message-ID: > <E2BB8074E5500C42984D980D4BD78EF9022A704E at MFG-NYC-EXCH2.mfg.prv> >Content-Type: text/plain; charset="us-ascii" > >Kai Schaetzl wrote: >> >> Somehow I managed

Somehow I managed to disable the creation of xenbr0 on boot-up of the host system. CentOS 5 with standard CentOS Xen. I changed all Xen VMs to use xenbr0 instead of virbr0 and disabled virtlibd. Works fine. But when I later restarted the machine I found that all networking for guests had gone. On inspection there's no xenbr0 created anymore. I can get it up by stopping network (or eth0)

Hello, Here is the situation. There is a machine with 3 intel gigabit card, 2 of them on PCI-X and in bridge, the 3rd is used only for management access. The machine is a dual Xeon 2.8GHz with HT. With 2.6.8 kernel from debian (testing) and htb with u32 on, i usually get about 30-40% software interrupts on CPU0 and CPU2, and without htb and u32, 10% less. Now, if I boot with 2.6.17.9 kernel,

Hi folks, I read quite some posts about "Destination host unreachable" problems before, but none could help me to solve my issue. So here we go: This is what I am using: SUSE Linux Enterprise Desktop 10 SP1 - Current with all updates Network configuration of my dom0: foobar:~ # ip a 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd

Hello, My "hardware" (?) RAID system seems to work but says "duplicate PV" while booting, I don't think I was reading them before. Any clues will be appreciated. >From what I recall: 1) RAID 1 was setup (using firmware setup program) on a machine with Intel S3200 SHV Server Board. 2) Installed Centos 5.1, default LVM style. Anaconda saw a single 500GB disk so I assumed

Hi *, having built Xen 4.1.0 and running my Dom0 on Slackware 13.1, I''m trying to assign different physical network interfaces to different DomU guests: vif = [ ''bridge=ethX'' ] in the DomU configuration files. My /etc/xen/scripts/network-bridge script, however, doesn''t create more than one bridge: root@cen:~# /etc/xen/scripts/network-bridge start