similar to: Intel Motherboard for using xen3.0 with VT

Hi all, I checked the following page but it is not exhaustive: http://wiki.xensource.com/xenwiki/IntelVT (it actually doesn''t even lists Core 2 Duo as supporting Intel-VT [it lists Core Duo though]... I''m not familiar with Wikis, I don''t know how I can change this myself [and I don''t know either if I''m allowed to change it]) Could all the people

Hi! I''ve got a motherboard (Gigabyte GA-G33-DS3R) where the Ethernet port has been broken. I''ll buy a new motherboard, but wants to keep all my other equipment (CPU, Memory, TV-cards etc). The requirements/wishes on the new motherboard are 2 Ethernet ports and 2 PCI slots. It would also be good if it would support VT-d. I''ve found two boards that would fulfill my

Hi, what to do, if the kernel hangs on boot time with: megaraid: ABORTING-1 cmd=12 <c=0 t=0 l=0> megaraid: ABORTING-1[d7] fw owner Konrad Naumann _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I''m wondering if the new Dell Precision 490 workstation is/looks to be VT-ready, planning it for SuSE10.1/Xen and unmodifies Windows guest? From the system specs: 1-2 Dual-Core Intel Xeon 5000 series 64-bit processors Intel 5000X chipset Windows XP/Vista or Redhat EWS4 Linux

Hi all, A while ago there was a thread here titled "Xen w/ IntelVT->Windows Success Report" http://lists.xensource.com/archives/html/xen-users/2006-06/msg00452.html I am having a similar problem as this user was in point 6 (Installation hangs at "Setup is starting Windows"). I am running Fedora Core 5 with Xen 3.0.2 and the related kernels installed, and using the

Hello, Problem: Debian(linux-image-xen-686) Dom0 does not boot from LSI MegaRaid I''m sorry, because I don''t know if I''m at the right place to ask for a solution for my problem, because it might be Debian related. Nethertheless I try: Xen Kernel are in Debian Unstable for a month or so. I''m running an Etch (testing) machine here and I wanted to try out

Dear, We released VMKNOPPIX(20070328) with Trusted Boot. http://unit.aist.go.jp/itri/knoppix/vmknoppix/index-en.html VMKnoppix is a collection of Virtual Machine Software, Xen, KVM, VirtualBox, QEMU, KQEMU(QEMU with Accelerator) and UserModeLinux. This version includes "Trusted Boot" (Trusted GRUB and IMA: Integrity Measured Architecture). === Features

Is there a definitive list for VT-enabled CPUs? Mainly because I have a Dual CPU computer that I want to turn into Xen system and do some cross-platform development etc. It now runs Windows XP, but I don''t want to do anything to it, if I will not be able to put Windows of some sort in one of the dom''s. I was hoping that Xensource.com would put up a testing page, whereas

Hi there We''re planning to buy a new server with a PentiumD with VT. Unfortunately we have some legacy server software which runs on Windows only and for that reason I have to install WindowsXP under Xen3. The problem is that I didn''t find too much documentation (tutorials, howtos, whatever) which describes installation and experiences with WinXP, besides some problem

I know most of the motherboards based off of the Intel Q35 northbridge usually have VT-d options for it to be enabled or disabled in the BIOS.  I''ve heard the same for Intel 5400''s and Intel 3200/3210''s but been looking through manuals for various server boards and don''t see VT-d options in the BIOS. However, I was wondering if anyone had success stories or

I just wanted to let you guys know that the Intel 3210SHLX server board works with VT-d. I''ve googled a lot, and could''t find much about it. The BIOS needs to be updated to R0047 for it to be enbled. (or at least later than R0044 which mine was shipped with) I tested exporting a nic to a smothwall hvm domU, works fine. Exporting a 3Ware 9xxx series Raid controller to a WinXP

Hi, can someone recommends mainboads+cpu combination with working vt and vt-d for a home server ( means reasonably priced) and with at least 3 pci slots besides the mainboards mentioned in http://wiki.xensource.com/xenwiki/VTdHowTo. Would it be worth to wait for AMD iommu technic, which should appear this year ? Thanks Frank _______________________________________________ Xen-users

Hi all, I'm just curios and would like some input from the community on this one. We're busy budgeting for a couple of new servers and I thought it would be good to try out the Core i7 CPU's, but see the majority of them don't offer VT-d, but just VT-x. Looking at the LGA1366 range, only the "Intel lga1366 i7 980XE" (from the list of what our suppliers stock) have VT-d,

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

Hello all, please tell me, how can I be sure that my Xen installation is built with Intel VT-d support? Something like xm info | grep -i KEY-REGULAR-EXPRESSION xm dmesg | grep -i KEY-REGULAR-EXPRESSION What a line should I look for? And if my installation was really built with VT-d support, how can I be sure, that Xen has successfully initialized VT-d hardware? I have read [1] and the

Hi, when I have made a decision tree with rpart, is it possible to "apply" this tree to a new set of data in order to find out the distribution of observations? Ideally I would like to plot my original tree, with the counts (at each node) of the new data. Reagards, Jay

Hi, Curiously, it''s worth noting that Xeon Processor 5100 series are not in the list of HVM Compatible Processors : http://wiki.xensource.com/xenwiki/HVM_Compatible_Processors Patrick ----- Message d''origine ---- De : Mohamed Zohny <mohamad.zohny@gmail.com> À : xen-users <xen-users@lists.xensource.com> Envoyé le : Mercredi, 8 Novembre 2006, 9h17mn 08s Objet :

Qiuping, Have you looked at what has already been done? I would expect that taking previous work such as this: http://llvm.org/pubs/2006-05-24-SAFECode-BoundsCheck.html and integrating into current LLVM would be a better idea than starting over. John On Tue, 30 Mar 2010, ??? wrote: > > Hi, > > Some days ago I am interested in detecting undefined behaviors > > in C

Strange things are happening at my asterisk box :) I've got asterisk setup to dail out with sip to my SIP provider. I've got NO fromuser/fromdomain stuff setup in my sip.conf When I place a call with my Siemens Optipoint 400 SIP phone everything is allright, the From: header is stating the username of the Siemens phone. When I place a call with X-Lite the From: header is altered and reads

Hi All, I have a huge tab separated file which a many columns. I want to read only few specific columns in R object. There are no column names/headers in the file. Can someone please suggest how can I do that. I checked the help of read.delim but wasnt able to find such option Thank you Reagards Vidhu [[alternative HTML version deleted]]