similar to: Dom0 lvm/software raid rhel4.1 booting issues.

I''m struggling to get Xen to boot on a FC4 Opteron box. I''ve included the tail of the boot log below [1]. I suspect that the problems relates to the software RAID 1 root and boot partitions, and how it relates to the initrd image. The RAID volumes fail to mount. I compiled the Xen snapshot from the 23rd September, and the only change I''ve made is to enable the

Hi, all! I want to change current RHEL 4.0 ES into CentOS 4.2 on Sun X4100 server. The server has SAS SCSI based two 2.5" hard disks. I could only install RHEL 4.0 Update 1 because the server is equipped with RHEL 4.0 Update 1's device driver only. I've included below the boot process messages concerned with SCSI controller. If it's possible for me to install CentOS 4.0 on my

I have an Adaptec 392320 Ultra320 SCSI adapter. I am running x86_64 SLES9 SP3. When I build x86_64 Xen with just the 2.6-xen kernel + initrd, I am getting the following error on the module load. But if I go back to building separate xenU and xen0 kernels without initrd the device works without any issues. Any idea what is going wrong here? Am I leaving something out of my initrd? Here is the

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

I have a question regarding the building of the unified xen kernel (linux-2.6-xen) and the use of initrd. In the past I built both xen0 and xenU kernels; the xen0 default configurations had SCSI and Fusion MPT support compiled into the kernel. Now, they are built as modules. The problem is that I am unable to boot the xen kernel built that way, even though I am building an initrd. I have

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find

I have a Dell ASC-39230(B) U320 SCSI controller. If I use the linux-2.6-xen kernel I am getting an "Invalid Sequencer interrupt" and the system hangs after this. But if I use the linux-2.6-xen0 kernel it works well. Does anyone know why this is happening and how I can make it go away? Thanks, Aravindh Puthiyaparambil Xen Development Team Unisys, Tredyffrin PA ACPI: PCI Interrupt

Originally, the test is on a tiger with RHEL installed. The fs is ext3 as default. Then the oops came up. I've installed the test kernel on another tiger with Suse, reiserfs as default. The kernel can boot successfully without any trouble. Is it a known issue? Or what causes this happen? thanks, -zhen -----Original Message----- From: Wang, Zhenyu Z Sent: 2004?7?20? 16:59 To: linux-ia64 at

All. I am running Xen on an ES7000 system with 4 procs and 4 GB memory. I am running Suse Sles-9 (32-bit) on the machine. I have compiled Xen (the tip on the unstable tree : 6552) with PAE enabled (XEN_TARGET_X86_PAE=y). The system boots fine. I started xend and when I tried to bring up a virtual machine, the system gave me the following error on the command line. On the serial port, I saw an

Dear xen-users, I''m using Xen Cloud platform 1.1 with cloudstack. I have this situation, not sure if it''s a bug or intended behavior. I''ve setup 2 servers: A hosts NFS server, B is installed XCP 1.1. I''ve mounted NFS shared directory from A to B, to make a SR for virtual guest disk image. (which in cloudstack, is called primary storage). But when I stop the

On 28/01/17 05:21, Kevin Stange wrote: > On 01/27/2017 06:08 AM, Karel Hendrych wrote: >> Have you tried to eliminate all power management features all over? > > I've been trying to find and disable all power management features but > having relatively little luck with that solving the problems. Stabbing > the the dark I've tried different ACPI settings, including

On 01/30/2017 04:17 PM, Adi Pircalabu wrote: > On 28/01/17 05:21, Kevin Stange wrote: >> On 01/27/2017 06:08 AM, Karel Hendrych wrote: >>> Have you tried to eliminate all power management features all over? >> >> I've been trying to find and disable all power management features but >> having relatively little luck with that solving the problems. Stabbing

Hello, I am new to this list, but having been using CentOS for sometime. I recently installed CentOS 5 on a test server to check out Xen. The installation was smooth had so far I have everything working except I cannot get samba to join our AD domain from the xen guest, using para-virtualization, I setup. I am out of ideas, and cannot find anyone having similar problems. I have tested my

Howdy folks, I''m trying to boot Xen 3.0 on a Centos 4(.2) system with root on a software raid1 volume. When booting the Xen kernel, ''raidautorun'' in the /init nash script fails to assemble either the root md or the raid5 md containing my LVM volumes. If I move root to /dev/hda1, the system boots fine. raidautorun still fails to assemble the md devices, but mdadm

Hi, I just came across this box [0] (McKay Creek). Seems to be exceptional building material for ZFS based NAS/iSCSI unit. I especially liked the two extra system disks hidden inside the box ! Any one have an experience with these ? [0] http://www.intel.com/design/servers/storage/ssr212mc2 -- Regards, Cyril

I may have asked about this before, but I can't find any records of so doing in my saved mail (which includes almost everything I ever read or write): All of a sudden, I am not getting flash drives automatically mounted in CentOS 5.3 with GNOME - they are recognized by the hardware, but there seems to be a (new?) problem with the maps. Here's the tail end of dmesg: usb 1-10: new high

Hi! I compiled the xen-4.0.1 in Linux (Ubuntu 10.04), but as usually, the xen-4.1.0 is not behaving in a manner similar to the previous version. Am I required from version xen-4.1.0, transfer the kernel via the command "git clone git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.gitlinux-2.6-xen" from now? I mean, the "make prep-kernels" command of the xen-4.1.0 no

Hi there I get the following error message when i try to "xm create <domid>" Error: Error creating domain: (22, ''Invalid argument'') I have included everything i can think of Thanks The DomU config is kernel = "/boot/vmlinuz-2.6.12-xenU" ramdisk = "/boot/initrd-2.6.12.6-xenU.img" memory = 128 name = "xen01" nics=1 disk = [

El lun, 23-10-2006 a las 16:28 +0400, Kirill Korotaev escribi?: > J.J.Garcia, > > in july 2006 you reported hit of bio.c:99 bug on CentOs kernel: > http://lists.centos.org/pipermail/centos/2006-July/067539.html > > Recently, we also hit the same bug, so maybe you can provide some details on: > 1. whether it is doesn't work for you or was fixed. > 2. how it was

I have a sles10sp3 vm that I''m trying to passthrough a scsi card, which has a DLT tape drive attached. Anyone doing anything similar? When I passthrough the scsi card (forced to do both ports), the vm dies when it loads, I think during udev. I''m viewing the vm through virt-manager, so I can''t scroll up and see what everything says. Is there a way to get the text xm