similar to: network in guest suddenly dead

-----Mensaje original----- De: Mario Montiel [mailto:mariomontiel@grupocsi.com.mx] Enviado el: Viernes, 26 de Mayo de 2006 10:29 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] DELL PowerEdge 2850 and TE4110P and TE110P I have many problems with this server and two cards TE4110P, because after several minutes one of two cards stays out without

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

Hi all, I am planning to improve virtualization in my company. So I have already a pool named p.e. Pool1. I have 5 servers Dell PowerEdge 1950 in it. Now I have 4 servers Dell PowerEdge 2850 too. Can I add 2850 to Pool1? I can''t find anything about compatibility for different hadrware in new release. -- Best regards, Den. _______________________________________________ Xen-users mailing

Hi all, We are running Asterisk 1.2.7.1 on our Dell Poweredge 2850 and are having massive sound quality issues. We are experiencing call quality issues for our remote location, namely calls cutting out and breaking up for our agents. The two main issues seem to be 'popping' and 'dropping' - popping would be pops and crackles on the line, where dropping would be complete audio

I am trying to get the temperature of a Poweredge 2850 with CentOS 6.3 on it. Has anybody on this list done this successfully? Thanks -Surya PS: Apologies for cross posting if you are on the Poweredge list. -- Surya Saha Department of Plant Pathology and Plant-Microbe Biology Cornell University, NY, USA http://www.linkedin.com/in/suryasaha

Hi, I have sucessfully installed an ad-integrated samba server. We mainly use the server for printer sharing and are very happy with it. We only have one problem or missing feature: On a Windows Server, you change the name of a printer, so that it is different to the share name. We use 8-letter sharenames for being compatible to old Win9x-Clients, bbut we would like to have logner, more

Hi all, I got the previously mentioned Dell Poweredge 2850 with 4GB RAM and Perc4e raid controller. Installation went well and the raid is pretty fast even with level 5. However I have another problem now... CentOS 5.2 only sees 256MB RAM. Googling a bit, got me to install kernel-PAE, this went well, but CentOS still sees only 256MB. Googling some more, I found a bios update was suggested and

Hi list! I'm trying to make a hd image with can boot from memdisk over PXE. So this is what i did: - Created a new VM [VMware] -Installed DOS on a 100MB HD from a floppy -bootet Linux over PXE [DamnSmallLinux] -in terminal: dd if=/dev/hda of=dos.img This image [dos.img] isn't working! Memdisk loads the Image and boots the HD! The error message is something like this: I/O Device

> Like I just mentioned in a different thread, I need to use > the ''noapic'' > options on both the PowerEdge models I''ve tried.. I''ll try to > build up a Xen vs. non-Xen kernel tomorrow or Tuesday and > grab a diff for you. Which PE models are they? We have quite a few different Dell PowerEdge models running 24x7 in the test lab, and

> Which one, just out of curiosity? They are Sony notbooks > What is the "preload install script"? Is the DVD El-Torito-bootable and > it runs something which reports that the system must be EFI _before_ it > boots any OS? > If you are using PXE, then that's along the same lines as BIOS. If they > want EFI, that's a stronger requirement than CD/DVD. If

On 7/15/2013 05:35, Michael Szerencsits wrote: > >> Which one, just out of curiosity? > > They are Sony notbooks > Cool. > > The CD is based on Windows PE. It can be bootet in BIOS and EFI mode. > I already tried the bootmgfw.efi from Windows. This work, but after the WinPE is booted a program is stated and this check the BIOS > if it is set to EFI boot. If not it

Hey, just pulled the new updates from the repository, and did a male dist, make install and an ./install.sh Then i made an initrd an bootet the system. But when I do an lsmod, it shows me: NOTHING! What''s wrong there?! Thomas Diederich ************************************************** * Boehringer Ingelheim Pharma GmbH & Co.KG * A Informationsverarbeitung / Diplomant

Hi, we have a debian etch system running here and it works fine for hvms (winxp) and paras (debian etchs). Today i tried to do a SLES10SP2 setup as hvm (in the future it should run as para). I used this config: --------------- xenserver:/etc/xen# cat gp2backuptest.cfg kernel = ''/usr/lib/xen-default/boot/hvmloader'' builder = ''hvm''

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

Hi list, I downloaded the netinstall iso, burned it to disk, and tried to install on my old Dell PowerEdge 2900 (Intel Xeon / 8Gb ram). Machine is connected to a KVM. The Centos 6 netinstall iso worked flawlessly on this exact configuration two days ago. The first thing anaconda does after verifying the media is complain that "pane is dead" in the lower left corner. At this point,

Hello, I have a Dell PowerEdge 2850 that periodically (6 times in the last 24 hours) freezes, requiring a power cycle in order to come back. The machine is running a Xen 2.0 stable source install. Here is the appropriate Grub entry: title Xen 2.0 / XenLinux 2.6 kernel /boot/xen-2.0.gz dom0_mem=131072 module /boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0 Dom0 boots happily, and new

Hi, recently I came across a deal on a bunch of Dell PowerEdge 2850 servers and I was hoping to use them to run Debian with Xen to provided virtualization support for Windows 2003 and other Debian installations. I was hoping to install 2 copies of Windows 2003 as well as 2 copies of Debian all on top of the DOM0 Debian installation. The servers have dual 3.2ghz CPU''s and include 16GB

Hi all I upgraded my testserver from opensuse 11.1 to 11.2 using zypper based method. All updates went smooth as far as there were no errors during the update process. Rebooting the whole farm the troubles started: not one domU bootet sucessfully, all of them showed the following messages: ... register_blkdev: cannot get major 8 for sd ... Volume group "VGsys" not found before they

Hello all, I have a PowerEdge 2950 that I am using to host Windows XP VM's under CentOS. I am experiencing poor performance in the Xen VM's. Any time I try to do something, the CPU usage (as reported by the Windows task manager) hits 100% for a few and then drops back down. This is causing the VM's to run sluggish and be quite annoying to use. Example.. I click IE.. cpu hits

>> After some tests it looks like bridgeing with the dell powerdege 2900 >> onboard broadcom nic does not work. I changed to eth2 (intel pro 1000) >> and everything works fine. kernel bug? I had a similar problem on a 2950. I solved it by downloading a tool from Dell as described in this post: http://lists.us.dell.com/pipermail/linux-poweredge/2006-August/026695.html Good