similar to: Xen doesn''t boot.

I have problems to get Xen 3.0 working on my notebook (FSC AMILO Pro V3205). I already used different operating systems for the xen0 domain, like FC5, SUSE 10.1 und Debian SID (2.6.16-2-xen-smp) but i always run into the same trouble. When I try to start a xenU domain it always hangs and I get this: ----------------------------------------------------------------------- debian37:~# xm create

Hi, when i try to set up a DomU with the following configuration: dir = /home/xen debootstrap = 1 size = 4Gb memory = 128Mb swap = 128Mb fs = ext3 dist = dapper image = sparse dhcp = 1 kernel = /boot/xen0-linux-2.6.16-11.1-generic initrd = /boot/xen-modules-2.6.16-11.1-generic mirror = http://archive.ubuntu.com/ubuntu/ and try to start it with: root@ubuntu:/etc/xen# xm create dapperDomU.cfg -c

hello. i just installed xen from source (using mke world then make install) booted into linux using the xen-2.0.7.gz kernel and then triewd to run ttylinux from the instructions in the user manual. i used this command. xm create /store/xmexample1 -c my xonfigfile ( xmexample1) is this. > # -*- mode: python; -*- > >

Hi, Running lastest Xen dev (3.0) supplied by Fedorea C4, I get this same problem as already reported but whatever information I''ve found on this list is not working: Starting udev: [FAILED] Any new hints on how to fix it? Regards, -- xm create -c vsi Using config file "/etc/xen/vsi". Started domain vsi, console on port 9604 ************ REMOTE CONSOLE: CTRL-] TO QUIT

Hello, I am getting kernel panic while trying to xm create a domU. Xen version 3.0 Linux kernel 2.6.12.6 Grub entry for dom0: title Xen 3.0 / XenLinux 2.6 kernel /boot/xen- 3.0.gz console=vga module /boot/vmlinuz-2.6-xen0 root=LABEL=/ ro console=tty0 module /boot/initrd-2.6.12.6-xen0.img For domU, my xm file contains: kernel = "/boot/vmlinuz-2.6.12.6-xenU "

Hello ! Is anybody using cowloop (http://www.atconsultancy.nl/cowloop/) with XEN ? i want to use this for saving diskspace and time for copying rootfs-images. the module compiles and loads fine (was done by a colleague) cowloop - (C) 2005 AT Consultancy/AT Computing cowloop - version: 2.15 cowloop - info: www.ATConsultancy.nl/cowloop cowloop - maximum allowed cowdevices: 16 cowloop -

Hi, I am new to Xen, I get the following message when trying to create domain using xen-2.0 built on RedHat 9/ Pentium PC with IDE drive: "Kernel panic: No init found. Try passing init= option to kernel". Below is console dump. Any suggestions ? Thanks Console Dump: [root@mppunami-linux xen]# xm console 35 ************ REMOTE CONSOLE: CTRL-] TO QUIT ******** Linux

Hi everyone! I came across a problem when I used xm create to create a domainU on my machine. I installed xen-3.0.4 on my computer, running Fedora 6, kernel version is 2.6.18-1.2798.fc. I want to install a Fedora 6 on xen, so I write the following config file, named fc6.cfg kernel = "/boot/vmlinuz-2.6.16.33-xenU" memory = 128 name = "fedora.fc6" dhcp = "dhcp" disk =

Hi I have been trying to get Xen running under Ubuntu. Status ------ I can get Ubuntu to boot on the patched 2.6.10 kernel however :- a) I get several boot errors thus :- Linux version 2.6.11.10-xen0 (root@gateway) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Thu Jun 9 19:58:00 BST 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000927c000 (usable) 146MB LOWMEM

Hi, I''ve installed xen-2.0.5 from source on gentoo, but the xen dom0 kernel doesn''t find the root device: ############################# snip ###################################### Kernel panic: VFS: Unable to mount root fs on unknown-block (3,3) ############################# snap ###################################### grub.conf: ############################# snip

Hi, I am trying to load kernel 2.6.6 on a Soekris net4521 from the network using PXE. I built my initrd with mkinitrd. RedHat nash (while running linuxrc) hangs after mounting /proc and says "Creating block devices". I am using the pxelinux.0 from the syslinux-2.10 distribution and the kernel and initrd were built on redhat 9.0. I built my kernel with BLK_DEV_RAM, RAMFS, TMPFS,

HELP!!!! I have been working diligently for the past 2 weeks trying to get Xen 3.0.2up and running on Kubuntu 6.06, Fedora Core 5, and Mandriva 2006.0 without any success. First off, the machine specs: Gateway M460 Notebook Intel Centrino M750 processor (1.8GHz) eth0: Broadcom T3 eth1: IPW2200 Wireless 80 GB hard drive 1 GB Memory ATI Radeon M600 video with 1280x800 LCD screen. Now the

Hi   I tried to create a guest domain and it failed however from another window i used xm list and observed the below.. I''m unable to login to the guest domain. Please help me.   [root@xenserver xen]# xm create -c xenclient1 vmid=1 Using config file "./xenclient1". Started domain centos5.2 Linux version 2.6.21-2950.fc8xen (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version

Hi, current paravirt patchqueue dies with ... Checking if this processor honours the WP bit even in supervisor mode... Ok. general protection fault: 0000 [#1] SMP Modules linked in: CPU: 0 EIP: 0061:[<c01021a8>] Not tainted VLI EFLAGS: 00010013 (2.6.20-git8-default-hg770 #7) EIP is at xen_evtchn_do_upcall+0x56/0x94 eax: ffffffff ebx: 00000000 ecx: fbfb9000 edx: ffff8b04

Hi! I am using Xen 3.1 (32 Bits PAE -- tarball download) on a debian Etch system. When starting a DomU, I get on the console: Checking if this processor honours the WP bit even in supervisor mode... <1>BUG: unable to handle kernel paging request at virtual address c0f5672c and in xm dmesg: (XEN) mm.c:612:d18 Non-privileged (18) attempt to map I/O space 003fc2f2 (XEN) mm.c:3267:d18

Hi, current paravirt patchqueue dies with ... Checking if this processor honours the WP bit even in supervisor mode... Ok. general protection fault: 0000 [#1] SMP Modules linked in: CPU: 0 EIP: 0061:[<c01021a8>] Not tainted VLI EFLAGS: 00010013 (2.6.20-git8-default-hg770 #7) EIP is at xen_evtchn_do_upcall+0x56/0x94 eax: ffffffff ebx: 00000000 ecx: fbfb9000 edx: ffff8b04

Hi, I got the following output booting through PXElinux. I used a netboot floppy image for my ISA NE2000 (RTL8019) network card to download the pxelinux.0 file from my server. I use syslinux 3.07. Here's my output: PXELINUX 3.07 2005-01-12 Copyright (C) 1994-2005 H. Peter Anvin ######################################################## # Welcome to the Petteflet PXE booting infrastructure. #

I posted this to the Fedora-test list but I''ll try here. If I need to ditch fedora rpms and move to building directly from src before posting here, please let me know and I''ll do so (apologies in advance if this is the case). I have the following Fedora RPMS installed: kernel-xen0-2.6.10-1.1155_FC4 kernel-xenU-2.6.10-1.1155_FC4 xen-2-20050222 I can

After running out of swap and memory and freezing, a domU called web02 won't start up. Both dom0 and domU are running CentOS release 5.4. dom0's kernel is 2.6.18-164.el5xen and I'm running the stock xen from CentOS: xen-3.0.3-94.el5 After issuing 'xen create web02' I see the following in the xen console: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) vmalloc

Hi, I have got xen compiled and installed properly.Domain 0 is created on the Xen port of Linux-2.6.11.10.But I am unable to boot the host domains. This is what one of my XenU config file contains [root@xion /]# cat /etc/xen/ttylinux kernel = "/boot/vmlinuz-2.6.11.10-xenU" memory = 64 name = "ttylinux" nics = 1 vif = [ ''mac=bb:00:00:00:00:11,