similar to: xen kernel panics at boot

I am installing Xen on a remote server. I left the other kernels on the grub.conf and made xen the default to boot from. The box didn''t boot into Xen on reboot but I''m not sure why. Here is my Xen config file: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that #

Hey, I built a 2.6.18.8-xen kernel and created the initial ram disk by following the instructions in README file in Xen source package. Then I put a entry for new kernel in /boot/grub/menu.lst (I am using CentOS 5). Here is the menu.lst: ########################################## default=1 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-8.el5) root

Hello Xen Users, I am facing a problem getting my installation of XEN boot up on a Red Hat Linux Guest OS. What''s happening is that the grub loader tries to install Xen but after a while it crashes and starts rebooting recursively. I have tried both the entries listed below. I am using the following entries in the grub.conf file: title Xen-bhatia 3.0 / XenLinux-bhatia 2.6.16

I''m a newbie. :) I followed the steps written by Jerone Young: http://sourceforge.net/mailarchive/message.php?msg_id=10562241 but i found an error at the 17th step: 17. mkinitrd /boot/initrd-2.6.10-xen0.img 2.6.10-xen0 it said:"No module ata_piix found for kernel 2.6.10-xen0, aborting." so I commented the line of "module /boot/initrd-2.6.10-xen0.img" in the

Our newly build xen kernel does not boot. The error message is : Invalid or unsupported executable format. I have build xen from the xen-2.0.4 source (make world, make install) on a debian sarge system. I have not changed any of the kernel configurations, I did make an initrd image. The entry in my menu.lst is : title Debian GNU/Linux, kernel 2.6.10-xen0 root (hd0,0) #

Many times when i boot my Xen machine i get a message saying something like "The greeter application has failed many times, using alternative greeter." From there on I can do everything OK as far as i can see. Sometimes when i boot the machine, it just randomly restarts halfway through the boot process. It has also been crashing alot lately when i try to run it 24/7. Any ideas? here

Hello Xen users, I tried to install Xen 3.1.0 on Scientific Linux (RHEL4), but this mission failed.. Hope you can help me by finding the reason for my problem. I downloaded the xen sources from http://bits.xensource.com/oss-xen/release/3.1.0/src.tgz/xen-3.1.0-src.tgz and compiled them by running "make" and "./install.sh". This seemed to work. After setting up grub like

I''m getting a VFS kernel panic when trying to booting to FC3 from Xen. Its the one that says I must supply a valid "root=" option. (sorry I don''t have it verbatim.) I''m using the xen-2.0 binary installer, kernel 2.6.9. I am using ext3fs, but I am fairly certain that I have compiled support into the kernel. (I''ve tired compile xen from the 2.0

Good evening all, I''ve all but finished installing Xen 2.0.5, XenLinux 2.6.10 and Debian GNU/Linux 3.0r4 into /boot on a colo box currently (and temporarily) running CentOS. I''ve chrooted into the debian install (chroot /boot /bin/bash) and was able to set everything up, install requisite packages, install xen, etc. Now I''m at the last step and I''ve run into

All, I am running xen3.0.2 on CentOS4.2, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! >Then system reboot.In grub.conf,I have changed

Hi all, Recently I build XEN 4.1 (from the xen.org) on centIOS 5.5 (kernel 2.6.38.4). After changing the grub file and rebooting the machine, I am continuously getting out of memory error. The content of my grub file: default=0 timeout=5 serial --unit=0 --speed=115200 terminal --timeout=10 console serial splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.38.4) root

Hello list, I tried to install Xen 3.1.0 on Scientific Linux (RHEL4), but this mission failed.. Hope you can help me by finding the reason for my problem. I downloaded the xen sources from http://bits.xensource.com/oss-xen/release/3.1.0/src.tgz/xen-3.1.0-src.tgz and compiled them by running "make" and "./install.sh". This seemed to work. After setting up grub like this,

Hi, Thanks to everyone involved in the Xen project. I think it is great and can''t wait to get my hands dirty with it. In the meantime, I cannot boot Dom0 on an ibm x335 and I am not sure what the problem is. Any insights are welcome. Here is what my grub.conf file looks like: title Fedora Core (2.6.8-1.521) root (hd0,0) kernel /vmlinuz-2.6.8-1.521 ro root=/dev/sda9

I installed the xen 2.6 binary tarball on my Linux 2.6 Fedora Core x86 system and added the entry to the grub.con file. I am still not able to get it up and working. It keeps restarting itself during the boot process. I''ve managed to capture the contents of the boot at the end before it restarts: error opening /dev/console error dup2''ing fd of 0 to 0 error

Hi, I installed 2.0.5 binary release of Xen in my FC3 , and below is my grub.conf ---- part of grub.conf -- title Fedora Core (2.6.10-1.766_FC3) root (hd0,7) kernel /vmlinuz-2.6.10-1.766_FC3 ro root=LABEL=/ rhgb quiet initrd /initrd-2.6.10-1.766_FC3.img title Xen 2.0 / XenLinux 2.6.10 root (hd0,7) kernel /boot/xen.gz dom0_mem=131072 module

I've been going along not noticing things happening right under my nose. so imagine my surprise when I discovered last night that my Centos 5 box has installed multiple new kernels over the last few months, as updates come out, and IT IS NOT BOOTING THE NEWST ONE. grub.conf says to boot kernel 0, and 0 is the newest one. but the one it actually boots is 6 or 8 down the list (clearly I've

Hi there, I''ve just built xen & dom0 kernel from gentoo ebuilds (bugs.gentoo.org), but my dom0 kernel crashes during boot. Any help is appreciated. Console log, grub.conf and .config are included, machine is celeron/466, 128MB of RAM. Console log: Linux version 2.6.9-xen0 (root@zirafa) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Sun Nov 14

Hello all, I am sort of new to XEN and I have a dedicated server that is hosted for me. This server is an intel single quad 4 with 4 gig of ram. The OS is Centos 5 completely updated. I have installed XEN from the add and remove applet within Centos. Here is my grub.conf: default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-92.1.10.el5PAE)

Hi all, I''m trying to get xen running on my new PC: [root@mail ~]# uname -a Linux mail 2.6.24.3-34.fc8 #1 SMP Wed Mar 12 18:17:20 EDT 2008 i686 i686 i386 GNU/Linux [root@mail ~]# rpm -qa | grep xen xenner-0.23-1.fc8 xen-libs-3.1.2-2.fc8 xen-3.1.2-2.fc8 kernel-xen-2.6.21.7-2.fc8 [root@mail ~]# [root@mail ~]# cat /etc/grub.conf # grub.conf generated by anaconda # # Note that you do not

On Wed, 3 Feb 2016, Warren Young wrote: > On Feb 3, 2016, at 12:24 PM, Max Pyziur <pyz at brama.com> wrote: >> >> When I tried rebooting the machine, none of the kernels would work except for the oldest one. > > Define ?would not work?. Post a photo of the error message somewhere if you can?t describe it better than that. You might have to turn off rhgb mode to get a