similar to: XEN4 virt-manager

Hi George, I already outlined the drbd-stuff on xen-users (see attachement). Yes - elrepo is right on mark. Excerpt: "The script (/etc/xen/scripts/block-drbd) I am using is from drbd84-utils-8.9.2-1.el6.elrepo.x86_64 - and already seems to contain the "drbd or phy" case; both in the add and the remove branch. CentOS6 XEN4 is based on the Kernel 3.10.68-11.el6.centos.alt.x86_64

Hi all, this is my first post..well, i hope that I could help all about I know (at time it''s not too much..only at time :p) I show you my problem..I have a vm virtualized with xen 3.1 and xen 3.2. Now, I want to export the same machine to Xen4. When I do this, it''s not possible, the machine don''t like xen4. Do you know about a how-to, manual, or something about this?

hello, i''ve much troubles with xen4 and my raidcontroller rocketraid2320 from highpoint. after i installed the latest kernel 2.6.33.3-pv_ops un ubuntu-lucid 64bit from jeremy''s git, i installed the driver from highpoint''s homepage v1.10. the driver was installed normal. ok, reboot and the driver works. modinfo rr232x:

Hi, After following the instructions here http://wiki.centos.org/HowTos/Xen/Xen4QuickStart and installing the kernel from Xen4 CentOS project (kernel-3.4.61-9.el6.centos.alt.x86_64) I can't use any networking because the firmware for my NIC is not available: Bringing up interface eth0.3: bnx2x 0000:02:00.0: firmware: requesting bnx2x/bnx2x-e1h-7.2.51.0.fw bnx2x:

I have signed and pushed the libvirt-1.2.15-3 and kenel-3.18.12-11 RPMs into the xen4 repository for CentOS-6.6. These have been in virt6-testing for a few months now with no negative reports. They should be available on mirror.centos.org in 30 or so minutes and externally as those mirrors update themselves against mirror. Thanks, Johnny Hughes -------------- next part -------------- A

Johnny Hughes <johnny at centos.org> wrote: > I have signed and pushed the libvirt-1.2.15-3 and kenel-3.18.12-11 RPMs > into the xen4 repository for CentOS-6.6. These have been in > virt6-testing for a few months now with no negative reports. Kernel 3.18.12-11 failed to boot on a Dell PowerEdge R620 - unable to start init, but restarted immediately after and I'm not currently

On 06/29/2015 12:24 PM, Johnny Hughes wrote: > I have signed and pushed the libvirt-1.2.15-3 and kenel-3.18.12-11 RPMs > into the xen4 repository for CentOS-6.6. These have been in > virt6-testing for a few months now with no negative reports. Is there any intent to keep that 3.18 kernel up to date with security patches, or is it just intended for testing? -- Bob Nichols

I have released the xen-4.4.2-5.el6 rpms (fix XSA-137 and 138) and the kernel-3.18.17.el6 rpms (fix the broadcom driver issues) to the xen4 repository. Thanks, Johnny Hughes -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL:

Hi ! I have install the xen4+centos5 on my server following the post of the kernel version is 2.6.32.27 which is download from git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git But after I reboot the server ,and run the "ifconfig", whose output likes the following [root@localhost scripts]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:C5:EB:96:C3

Desde el terminal de Ubuntu, he conseguido descargar los datos usando esto: DESCARGAR LISTA DE ESTACIONES wget --method GET --header 'cache-control: no-cache' --no-check-certificate --output-document - https://opendata.aemet.es/opendata/api/valores/climatologicos/inventarioestaciones/todasestaciones/?api_key=*vuestra api key* DESCARGAR DATOS HISTÓRICOS Diciembre 2017, ALICANTE wget

Greetings! Trying to to run a xen3 domU on a xen4 dem0 I run into problems. The xen server ''XEN1''(dom0) is openSUSE-11.3 (kernel 2.6.34) and xen-4.0.1. With qemu I created an image ''M08.raw'' from the SUSE-9.3 (kernel 2.6.11) and XEN-3.0 installation CD''s. The XEN modules were included in the installation. In M08.raw/boot I configured grub/menu.lst:

Zhang, Xiantao wrote: >>From 6b731c15afa8cec84f16408c421c286f1dd1b7d3 Mon Sep 17 00:00:00 2001 > From: Xiantao Zhang <xiantao.zhang at intel.com> > Date: Wed, 12 Mar 2008 13:45:40 +0800 > Subject: [PATCH] KVM:IA64 : Add TLB virtulization support. > > vtlb.c includes tlb/VHPT virtulization. > Signed-off-by: Anthony Xu <anthony.xu at intel.com> >

Zhang, Xiantao wrote: >>From 5c70c038c57190144390ae9d30c3d06afba103d4 Mon Sep 17 00:00:00 2001 > From: Xiantao Zhang <xiantao.zhang at intel.com> > Date: Tue, 1 Apr 2008 14:59:30 +0800 > Subject: [PATCH] KVM:IA64 : Add kvm sal/pal virtulization support. > > Some sal/pal calls would be traped to kvm for virtulization > from guest firmware. > Signed-off-by: Xiantao

Zhang, Xiantao wrote: >>From 6b731c15afa8cec84f16408c421c286f1dd1b7d3 Mon Sep 17 00:00:00 2001 > From: Xiantao Zhang <xiantao.zhang at intel.com> > Date: Wed, 12 Mar 2008 13:45:40 +0800 > Subject: [PATCH] KVM:IA64 : Add TLB virtulization support. > > vtlb.c includes tlb/VHPT virtulization. > Signed-off-by: Anthony Xu <anthony.xu at intel.com> >

Hello. I'm installing the latest version of XEN to CentOS 6.4 machine. XEN version: 4.2.3-25.el6.centos.alt kernel: 3.10.20-11.el6.centos.alt When I reboot, many messages appears on the screen, indication the loading of XEN and then.. just a black screen. Several days ago I successfully installed XEN on another machine, but that was XEN 4.2.3-23 and kernel 3.4.68-9. And now, after the new

Hi list After I install xen4.0 in my debian squeezz,it added the following lines into /boot/grub/grub.cfg ### BEGIN /etc/grub.d/20_linux_xen ### menuentry ''Debian GNU/Linux, with Linux 2.6.32-5-xen-amd64 and XEN 4.0-amd64'' --class debian --class gnu-linux --class gnu --class os --class xen { insmod part_msdos insmod ext2 set

Hello I successfully upgraded to xen 4.0 on my Gentoo servers and I''m trying to use remus to enhance servers'' HA. first of all: I''ve tried remus with --no-net option just to test and it works fine, if I try to run it without that option it just stops claiming that no sch_queue module can be loaded. That module is present in xen 4.0 source tree, but my gentoo seems not

Hi, anyone got a clue how i can enable the old style config files from xen 3.x in xen 4? Thanks! _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

For anyone who is using our Xen4CentOS6 repo, we have created a new kernel from the new LTS 3.10.x kernel tree (to upgrade the current 3.4.x xen kernel) that we hope to roll into the production repo. Please look here and test the kernel, libvirt, and xen files there: http://dev.centos.org/centos/6/xen-c6-RC1/ That repo should be able to be used for testing or it should be able to update a

The new Xen 4.4.1-5 and LibVirt 1.2.10-3 RPMs that were being tested via this list are now live in the main Xen4CentOS repo for CentOS-6.6: http://lists.centos.org/pipermail/centos-announce/2015-January/020904.html Thanks, Johnny Hughes -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP