similar to: Slow umounts on SLES10 patchlevel 3 ocfs2

One more follow on, The combination of kernel.panic=60 and kernel.printk=7 4 1 7 seems to have netted the culrptit: E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_write_timeout:137 ERROR: Heartbeat write timeout to device dm-12 after 60000 milliseconds E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_stop_all_regions:1517 ERROR: stopping heartbeat on all active regions.

Hi all, We are running CentOS 5.2 64bit as our file server. Currently, we used GFS (with CLVM underneath it) as our filesystem (for our multiple 2TB SAN volume exports) since we plan to add more file servers (serving the same contents) later on. The issue we are facing at the moment is we found out that command such as 'ls' gives a very slow response.(e.g 3-4minutes for the outputs of ls

After upgrading from 2.6.28.10 to 2.6.29.3 I've saw following new errors in kernel log: May 12 14:46:41 falcon-cl5 May 12 14:46:41 falcon-cl5 (6757,7):ocfs2_read_locked_inode:466 ERROR: status = -22 Only one node is mounted volumes in cluster: /dev/sde on /home/apache/users/D1 type ocfs2 (rw,_netdev,noatime,heartbeat=local) /dev/sdd on /home/apache/users/D2 type ocfs2

Hi, I setup two nodes, 192.168.20.20, and 192.168.20.21, The os is Ubuntu1204 with Kernel version 3.0: root at Server21:~# uname -a Linux Server21 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Server20 reboot for the disconnection with iSCSI SAN, so Server20 recovery resource locks for Server21. Server20: Feb 27 09:29:31 Server20 kernel:

Hi, I setup two nodes, 192.168.20.20, and 192.168.20.21, The os is Ubuntu1204 with Kernel version 3.0: root at Server21:~# uname -a Linux Server21 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Server20 reboot for the disconnection with iSCSI SAN, so Server20 recovery resource locks for Server21. Server20: Feb 27 09:29:31 Server20 kernel:

We upgraded from a 10/100Mbs to a 2 100/1000 bonding. We notice the speeds of NFS to be around 70-80Mb/sec. Which is slow, especially with bonding. I was wondering if we need to tune anything special with the Network and NFS. Does anyone have any experience with this? TIA

Hi I have: SLES 10 SP2 (2.6.16.60-0.21-smp) ocfs2-tools-1.4.0-0.3 ocfs2console-1.4.0-0.3 and I can't change "heartbeat dead threshold" value. Content of /etc/sysconfig/o2cb: # O2CB_ENABLED: 'true' means to load the driver on boot. O2CB_ENABLED=true # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start. O2CB_BOOTCLUSTER=ocfs2 # O2CB_HEARTBEAT_THRESHOLD:

Does anyone has implemented this sucessfully? I am asking this because we are implementing Xen on our test lab machines, which they hold up to three 3com and intel Nics 10/100mbps based. These servers are meant to replace MS messaging and intranet webservers which holds up to 5000 hits per day and thousands of mails, and probably the Dom0 could not handle this kind of setup with only one 100mbps

Hi, i dont seem to be able to get ocfs running on RH3 U8 32Bit [root@libra-devb-db1 root]# uname -a Linux devb-db1.mydomain 2.4.21-47.ELsmp #1 SMP Wed Jul 5 20:38:41 EDT 2006 i686 athlon i386 GNU/Linux [root@devb-db1 root]# cat /etc/redhat-release Red Hat Enterprise Linux AS release 3 (Taroon Update 8) [root@devb-db1 root]# rpm -ivh ocfs-2.4.21-EL-smp-1.0.14-1.i686.rpm Preparing...

Hi! Seems we're facing some memory leak here. This is vanilla 2.6.19-rc6 on a x86_64 box, 4GB RAM. A simple `ls -Rn' on a filesystem with lots of files makes the box leak so much RAM that the OOM killer starts to kick in. With slab alloc debugging turned on, we see this: # mount; ls -Rn; wait some seconds; Ctrl-C [root@lnxp-1038:/backend1]$ cat /proc/slab_allocators | egrep

Hi All, We have ocfs2 node cluster with oracle 11G RAC running, The node2 got crashed automatically, when i rebooted node one for maintenance. please check the log from node2 , before its got crashed. Oct 23 15:42:25 node2 kernel: ocfs2_dlm: Nodes in domain ("029C02C993E44E90879922E268FB161A"): 2 Oct 23 15:42:29 node2 kernel: ocfs2_dlm: Node 1 leaves domain

Hi, When system booting getting error message "modprobe: FATAL: Module ocfs2_stackglue not found" in message. Some nodes reboot without any error message. ------------------------------------------------- ul 27 10:02:19 alf3 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jul 27 10:02:19 alf3 kernel: Netfilter messages via NETLINK v0.30. Jul 27 10:02:19 alf3 kernel:

Hallo, I have two servers and both are connected to external array, each by own SAS connection. I need these servers to work simultaneously with data on array and I think that ocfs2 is suitable for this purpose. One server is P4 Xeon (Gentoo linux, i386, 2.6.22-r2) and second is Opteron (Gentoo linux, x86_64, 2.6.22-r2). Servers are connected by ethernet, adapters are both Intel

Hi all, We're looking at deploying a small Xen cluster to run some of our smaller applications. I'm curious to get the lists opinions and advice on what's needed. The plan at the moment is to have two or three servers running as the Xen dom0 hosts and two servers running as storage servers. As we're trying to do this on a small scale, there is no means to hook the

Dear Sirs and Madams, I run a small visual effects production company, Hammerhead Productions. We'd like to have an easily extensible inexpensive relatively high-performance storage network using open-source components. I was hoping that OCFS2 would be that system. I have a half-dozen 2 TB fileservers I'd like the rest of the network to see as a single 12 TB disk, with the aggregate

I'm using ocfs2 and all modules from Suse (SLES9), no self compilations. Here are the details: * 32-bit machine (writing to ocfs2 partition/LUN and where the corruption was reported): Kernel: 2.6.5-7.257-bigsmp #1 SMP i686 i386 GNU/Linux OCFS2 rpms: ocfs2console-1.2.1-4.2 ocfs2-tools-1.2.1-4.2 o2cb_ctl -V: o2cb_ctl version 1.2.1 /etc/init.d/o2cb status: Module "configfs":

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

hello, I'm running Ubuntu Breezy with the OCFS2 modules in the standard kernel. I installed ocfs2console and ocfs2-tools I've formatted a partition with ocfs2. But I can't add any node or mount the device(with the ocfs2console). because I get a "Unable to access cluster service" I can't find the cause nor the solution to this. root@lenaeja:~# /etc/init.d/o2cb status

RHEL 4 (CENT OS) Am I waisting my time trying to get the 10G Clusterware installer to use OCFS2 volumes for the voting and OCR disks ? The ocfs2 setup seems happy on both nodes but the 10G installer says the location entered for the oracle cluster registry (OCR) is not shared across all the nodes in the cluster Do the volumes need to mounted ? I did with no change . [root@green rc5.d]#

Hello... I wonder if someone have had similar problem like this... a node evicts almost in a weekly basis and I have not found the root cause yet.... Mar 2 10:20:57 xirisoas3 kernel: ocfs2_dlm: Node 1 joins domain 129859624F7042EAB9829B18CA65FC88 Mar 2 10:20:57 xirisoas3 kernel: ocfs2_dlm: Nodes in domain ("129859624F7042EAB9829B18CA65FC88"): 1 2 3 4 Mar 3 16:18:02 xirisoas3 kernel: