similar to: ocfs2 in sles11 vs. sles10

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

I built a couple new servers on SLES11 because I needed to use USB. Since SLES11 has xen 3.4 packages that seemed like the way to go. I''m questioning the stability of the two new servers compared to my SLES10SP2 servers. I''m also questioning the performance of Windows domUs. On Thanksgiving day one of my SLES11 servers running 7-8 domUs crashed and restarted three times. Being

I''m running xen on SLES10SP2. It''s been much more stable than SP1, but I still occasionally have issues. For example, one of my servers (8 CPU/32GB RAM) has five sles pv domUs and five fully virtualized windows 2k3 domUs. It had been up for almost 60 days. Yesterday afternoon one of the sles domU''s stopped responding. I went to check on it and I couldn''t using

Hello. I plan to use OCFS2 + DRBD for email server. Problem: I use "seeker" for testing http://www.linuxinsight.com/how_fast_is_your_disk.html And get this: Results: 65 seeks/second, 15.23 ms random access time Then I do rm of many files - it fals to 10 seeks/second and performance is terrible. What can I do to increase it? What`s wrong? Below is many info. What we have: Debian

Hi Mark, I had this same issue trying to install SLES9SP4 PV on to SLES10SP1 host. You cannot do this. You can however install a SLES9SP4 FV guest. If you want a PV SLES9SP4, you will need SLES10SP2. -A _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, i''m running a two dom0 nodes cluster for HA, and xen domUs running on top, currently it handles 5 domUs. The issue is that there''s a domU that can only run on one node, it''s not possible to start it on the other one. I get a ''b'' status and can''t access the console. Other domUs can start in either node and I can access their console without

Yesterday all of my xen servers went down hard and also lost connection to ocfs2. 95% of the domU''s came back up ok, but I do have problems with a few windows domUs. They seem to start ok, but them immediately lose connection to the network. If I have them on DHCP they are on long enough to get an address, then they lose connection. If I look at the properties of the NIC it says 1GB

Hello, this is my scenario: 1)I've created a Pacemaker cluster with the following ocfs package on opensuse 11.3 64bit ocfs2console-1.8.0-2.1.x86_64 ocfs2-tools-o2cb-1.8.0-2.1.x86_64 ocfs2-tools-1.8.0-2.1.x86_64 2)I've configured the cluster as usual : <resources> <clone id="dlm-clone"> <meta_attributes id="dlm-clone-meta_attributes">

Hellow, everyone I'm from HuaWei, China. We are looking for the candidate of virtualization platform among several vendors. Learned from Oracle people, the latest version of ocfs2 has integrated reflink feature which was commited to the the linux 2.6.32 kernel. But as we know, the sles11 integrated the linux 2.6.27 kernle, so the relink feature is not avaiable on the sles11 platform. We

Hi, I run into problems with the ipaddress fact using the latest Facter gem (1.6.4, 1.6.5) on SLES11. The versions and gems I use work perfectly fine on SLES10 SP3. The problem: running "facter" without arguments results in an error, even though the erroring fact "ipaddress" is ok. test:~ # cat /etc/SuSE-release SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL

Hi, On 12/05/2017 11:19 PM, BASSAGET C?dric wrote: > Hello > Retried from scratch; and still have an error when trying to bring up > the second cluster : > > root at LAB-virtm6:/# o2cb register-cluster ocfs2new > o2cb: Internal logic failure while registering cluster 'ocfs2new' > > root at LAB-virtm6:/mnt/vol1_iscsi_san1# o2cb list-clusters > ocfs2 >

Hi, On 12/05/2017 11:19 PM, BASSAGET C?dric wrote: > Hello > Retried from scratch; and still have an error when trying to bring up > the second cluster : > > root at LAB-virtm6:/# o2cb register-cluster ocfs2new > o2cb: Internal logic failure while registering cluster 'ocfs2new' > > root at LAB-virtm6:/mnt/vol1_iscsi_san1# o2cb list-clusters > ocfs2 >

It is obsoleted since Dec 2005. Signed-off-by: WANG Cong <amwang at redhat.com> --- Documentation/ABI/obsolete/o2cb | 11 ----------- Documentation/ABI/removed/o2cb | 10 ++++++++++ Documentation/feature-removal-schedule.txt | 10 ---------- fs/ocfs2/cluster/sys.c | 9 --------- 4 files changed, 10 insertions(+), 30 deletions(-) --- diff

Hi I have: SLES 10 SP2 (2.6.16.60-0.21-smp) ocfs2-tools-1.4.0-0.3 ocfs2console-1.4.0-0.3 and I can't change "heartbeat dead threshold" value. Content of /etc/sysconfig/o2cb: # O2CB_ENABLED: 'true' means to load the driver on boot. O2CB_ENABLED=true # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start. O2CB_BOOTCLUSTER=ocfs2 # O2CB_HEARTBEAT_THRESHOLD:

Here is the original set of fixes, split out into 14 individual ones. In addition to splitting them out, I also changed the ones that were HAS_* to NO_* as requested. The last two patches are needed to build on openSUSE 10.3 which is based on 2.6.22. I used it as a sanity check and found those failures. -Jeff -- Jeff Mahoney SUSE Labs

Hello, I have an active, balanced webcluster with 2 SLES10SP2 nodes, both running ocfs2 with an iscsi target. The ocfs2 volume is mounted on both nodes. Everything works fine, except sometime the load on both systems go as high as 200, then both systems freeze, only reboot helps to regain control. I noticed that this behaviour does not occur when the cluster is NOT balanced. When the load on both

Hi Yuvrajsinh, thank you for the reply, yes it was a kernel issue and we have done an upgrade to 2.6.18.308 and used the packges that match the version number, and I have done a update post this evening as below Hi All, since the post I have made some kind of a progress 1. I upgraded the kernel to 2.6.18-308.1.1.el5 same I was able to download the ocfs2 module is

Hello All, I have multiple OCFS2 clusters on SLES10 SP2 running Xen. We needed to increase the O2CB_HEARTBEAT_THRESHOLD from 31 up to 61 and did so successfully on 2 of our 3 clusters. However on one of the three clusters we are not able to change the value. The /etc/sysconfig/o2cb file contains 61 as the threshold after reconfiguring via /etc/init.d/o2cb configure, we reconfigure all 3 nodes at

I am trying to coordinate properties and data between 2 file servers. on file server 1 I have: zfs get all zfs52/export/os/sles10sp2 NAME PROPERTY VALUE SOURCE zfs52/export/os/sles10sp2 type filesystem - zfs52/export/os/sles10sp2 creation Mon Mar 22 15:28 2010

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, another problem I did not find a solution for... I ran "o2cb configure" and configured a cluster named "ocfs2". Lazy me, I did not invent a new name. Now this cluster must be renamed to avoid confusion, the name has to change to "sapcluster". I changed /etc/ocfs2/cluster.conf to the new name and ran