Displaying 20 results from an estimated 100 matches similar to: "mounted.ocfs2 -f return Unknown: Bad magic number in inode"
2017 Jun 30
2
mdraid doesn't allow creation: device or resource busy
Dear fellow CentOS users,
I have never experienced this problem with hard disk management before
and
cannot explain it to myself on any rational basis.
The setup:
I have a workstation for testing, running latest CentOS 7.3 AMD64. I am
evaluating oVirt and a storage-ha as part of my bachelors thesis.
I have already been running a RAID1 (mdraid, lvm2) for the system and
some oVirt 4.1 testing.
2006 Apr 13
1
device-mapper multipath
I am attempting to get multipath working with device-mapper (CentOS
4.2 and 4.3). It works on EVERY install of mine from RH (also v4.2,
4.3), but the same multipath.conf imported to all my installs of
CentOS do not work. Note that I have tested a working 4.2
configuration file from RH on CentOS 4.2 and a working 4.3
configuration (it changed slightly) on CentOS 4.3. Neither worked. Our
production
2010 Jan 12
1
multipath
Hi.
Somehow I do not see any out put using multipath -l or multipath -ll . But I
can see using dry run ie multipath -d.
Also I do not see /dev/dm-*
It was there before. How do I re claim it.
Thanks!
Paras.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20100111/6c286a02/attachment-0001.html>
2009 Sep 17
1
multipath using defaults rather than multipath.conf contents for some devices (?) - why ?
hi all
We have a rh linux server connected to two HP SAN controllers, one an HSV200 (on the way out),
the other an HSV400 (on the way in). (Via a Qlogic HBA).
/etc/multipath.conf contains this :
device
{
vendor "(COMPAQ|HP)"
product "HSV1[01]1|HSV2[01]0|HSV300|HSV4[05]0"
getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
2010 May 27
2
Multipathing with Sun 7310
Dear list,
we have a relatively new Sun Storage 7310, where we connect CentOS 5.5
Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The Blades
boot from SAN via qla2xxx, and have no harddisks at all. We want them to
use multipathing from the very beginning, so /boot and / are already seen
by multipathd. Problem is, that the Sun 7310 has two storage heads which
run in
2011 Jul 14
1
mount.ocfs2: Invalid argument while mounting /dev/mapper/xenconfig_part1 on /etc/xen/vm/. Check 'dmesg' for more information on this error.
Hello,
this is my scenario:
1)I've created a Pacemaker cluster with the following ocfs package on opensuse
11.3 64bit
ocfs2console-1.8.0-2.1.x86_64
ocfs2-tools-o2cb-1.8.0-2.1.x86_64
ocfs2-tools-1.8.0-2.1.x86_64
2)I've configured the cluster as usual :
<resources>
<clone id="dlm-clone">
<meta_attributes id="dlm-clone-meta_attributes">
2008 Sep 29
3
LVM related bug in the GPL PV drivers for Windows?
Dear Xen users!
In case you were struggling with recent version of th gplpv drivers,
I''ve possibly found an LVM related bug in it, and reported to James
Harper. Thats''s the point:
I''ve tested the mentioned version of your driver on top of 32bit
xen-3.2.1 32bit xen-3.3.0 and 64bit xen xen-3.3.0 hypervisors, dom0 was
always an appropriate version of a 32bit PAE kernel,
2009 May 27
2
Problem with OCFS2 on RHEL5.0 while installing CRS 10.2.01
Hi team
I had installed OCFS2 on RHEL5.0 . every thing looks fine but when I was installing CRS on the node I got error message OCFS2 is not supported. Can you please put some light on this. Please find other info below
[root at eregtest1 client]# uname -a
Linux eregtest1.admin.abdn.ac.uk 2.6.18-92.el5 #1 SMP Tue Apr 29 13:16:15 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
i am using RHEL 5.0
2013 Nov 07
1
IBM Storwize V3700 storage - device names
Hello,
I have IBM Storwize V3700 storage, connected to 2 IBM x3550 M4 servers
via fiber channel. The servers are with QLogic ISP2532-based 8Gb Fibre
Channel to
PCI Express HBA cards and run Centos 5.10
When I export a volume to the servers, each of them sees the volume
twice, i.e /dev/sdb and /dev/sdc, with the same size.
Previously I have installed many systems with IBM DS3500 series of
2003 May 07
4
IPFW Bandwidth throttling?
I am trying to limit outgoing SMTP traffic to about 14 Mbps and these are
the IPFW rules I am using.
${fwcmd} add pipe 1 tcp from 192.168.0.0/24 to any 25 out via dc0
${fwcmd} pipe 1 config bw 14Mbit/s
I've tried multiple tweaks to the pipe rule and I seem to be missing
something. I only get about half the bandwidth I specify. Is this normal
behavior? Is there something wrong
2018 Apr 08
1
How to script the script sample into script "OR", please advice
Dear User R
It's been a pleasure talking with you. I am newcomer use R. Would you
please help me how to translate the script below to "R" script?
* Area under receiver operating characteristic (AU-ROC)
predict r1m1p, p
roctab malaria r1m1p, graph summary
* Area under receiver operating characteristic (AU-ROC) curve
predict r1m2p, mu
roctab malaria r1m2p, graph summary
2018 Apr 08
2
Syntax roccomp-using R
*Dear Bert, *
Thank you very much for your feedback and the useful link https://rseek.org/
and https://www.r-bloggers.com/calculating-auc-the-area-under-a-roc-curve/.
Actually, I want to know different performance between Stata and R, in
multilevel logistic regression. For this purposes, I replicate ".do" file
use Stata in
2006 May 29
0
Xen 3.0 ocfs2 and Oracle Rac 10gR2
Hi to all:
I''m trying to build an Oracle Rac10gR2 under 2 xenitized RedHat 4 nodes ( The host domain is debian 3.1 )
Well, all goes well until time to mount ocfs2. For Rac10gR2 I need to mount ocfs2 partitions with the datavolume option, but latests versions of ocfs2 doesn''t comes with this option ( you can enable the O_DIRECT feature directly in the init.ora file, with the
2017 Mar 29
0
Mixed bonding and vlan on plain adapter possible?
Hello,
I have a CentOS 7.3 + updates server where my configuration arises from the
need to connect via iSCSI to a Dell PS Series storage array and Dell not
supporting bonding.
So that I need to use 2 nics on the same vlan to connect to iSCSI portal IP
and then use multipath.
Also, the iSCSI lan is on a dedicated vlan
I have only these 2 x 10Gbit adapters and I also need to put other vlans on
them
2017 Oct 10
3
/boot partition too small
On Tue, Oct 10, 2017 at 10:36:16AM -0400, Stephen John Smoogen wrote:
> On 10 October 2017 at 09:55, KM <info4km at yahoo.com> wrote:
> > First off - let me say I am not an administrator. I need to know if there is an easy way to increase my /boot partition. When I installed CentOS 6 after running 5, it was my oversight not to increase the /boot size. it's too small and I
2016 Apr 08
2
Adding Two-Headed Arrow in map legend
I am trying to draw maps for the world using:
library(rworldmap)
library(maptools)
library(RColorBrewer)
tmp2<- dput(head(pece,10))
structure(list(iso3 = c("AUS", "AUT", "BEL", "CAN", "CHE", "CHL",
"CZE", "DEU", "DNK", "ESP"), eps_score = c(0.877343773841858,
2.68984365463257,
2004 Oct 05
2
broadvoice connection problem
All,
I signed up for a broadvoice BYOD plan over the weekend (very
excited about their offering) and after about an hour I had asterisk
registered and was making in and out bound calls. However, the next day
(without changing anything) I couldn't call in or out and haven't been able
to get it going again. I can connect using a softphone (X-Lite) and make
calls in and out
2010 Dec 13
3
Slow I/O on ocfs2 file system
Hello,
I have found, that ocfs2 is very slow when doing I/O operation without
cache. See a simple test:
ng-vvv1:~# dd if=/data/verejna/dd-1G bs=1k | dd of=/dev/null
1048576+0 records in
1048576+0 records out
1073741824 bytes (1.1 GB) copied, 395.183 s, 2.7 MB/s
2097152+0 records in
2097152+0 records out
1073741824 bytes (1.1 GB) copied, 395.184 s, 2.7 MB/s
The underlying block device is quite
2016 Apr 09
2
Adding Two-Headed Arrow in map legend
Forgot to copy the list
Dear Jim,
Thank you for your reply. I must be doing something wrong, If this is my
command to plot a map of Europe:
eps_europe <- mapCountryData(n, nameColumnToPlot="eps_score", mapTitle="EPS
Score - Europe",colourPalette=colourPalette,
catMethod="fixedWidth", missingCountryCol =
"white",
2016 Apr 09
0
Adding Two-Headed Arrow in map legend
Hi Miluji,
Try this:
arrows(-100,-140,100,-140,code=3)
Jim
On Fri, Apr 8, 2016 at 10:24 PM, Miluji Sb <milujisb at gmail.com> wrote:
> I am trying to draw maps for the world using:
>
> library(rworldmap)
> library(maptools)
> library(RColorBrewer)
>
>
> tmp2<- dput(head(pece,10))
> structure(list(iso3 = c("AUS", "AUT", "BEL",