similar to: hardware needed for OCFS

I have a 2 node cluster of HP DL380G4s. These machines are attached via scsi to an external HP disk enclosure. They run 32bit RH AS 4.0 and OCFS 1.2.4, the latest release. They were upgraded from 1.2.3 only a few days after 1.2.4 was released. I had reported on the mailing list that my developers were happy, and things seemed faster. However, twice in that time, the cluster has gone down due

Hi everbody this is my first post, I have two test server .(Both of them is idle) db1 : RHEL4 OCFS2 db2 : RHEL3 OCFS I test the IO both of them The result is below. db1(Time Spend)db2(Time Spend)OS Test Command dd (1GB) (Yazma)0m0.796s0m18.420stime dd if=/dev/zero of=./sill.t bs=1M count=1000 dd (1GB) (Okuma)0m0.241s8m16.406stime dd of=/dev/zero if=./sill.t bs=1M count=1000 cp

Hi everbody this is my first post, I have two test server .(Both of them is idle) db1 : RHEL4 OCFS2 db2 : RHEL3 OCFS I test the IO both of them The result is below. db1(Time Spend)db2(Time Spend)OS Test Command dd (1GB) (Yazma)0m0.796s0m18.420stime dd if=/dev/zero of=./sill.t bs=1M count=1000 dd (1GB) (Okuma)0m0.241s8m16.406stime dd of=/dev/zero if=./sill.t bs=1M count=1000 cp

Hello All, We're hosting DB1 and DB2 with db_block_size set to 8K, 16K respectively File system creation is done with mkfs.ocfs2 -b 4K -C 32K -N 4 -L LABLE /dev/mapper/xxxx Mount is done with: ocfs2 _netdev,datavolume,nointr 0 0 I'd like to know if we can separate most of the tablespaces on different LUNs, even if they're on the same disk group sometimes, is it

I've been using OCFS2 on a 3 way Centos 5.2 Xen cluster for a while now using it to share the VM disk images. In this way I can have live and transparent VM migration. I'd been having intermittent (every 2-3 weeks) incidents where a server would self fence. After configuring netconsole I managed to see that the fencing was due to a heartbeat threshold timeout so I have now increased

Robin, To me, anyone else includes the kernel of the current node. Well, if it is unclear the man page should be revised. Also a big warning message on ocfs2.fsck would be nice, after all we all make mistakes. But this is only my two cents. Running fsck on any journaled filesystem will replay the journal. This will cause corruption if the filesystem is mounted read/write, even if the

Hi, I sent an email to Mark Fisheh of Oracle Corp. & posted this issue at OTN under Linux thread this morning. I hope that someone among you might have experienced this and can help. On that basis, I am sending this to you too. I am stuck & will really appreciate if you can shed some light on this. Thanks. Anjan

An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20120304/04099724/attachment.html>

Hi, Sunil or Tao, I have a 4 nodes OCFS2 cluster running OCFS2 1.2.8 on SuSE 9 SP4. When I tried to do failover testing (shutting down one node), the whole cluster hung (I can not even login to any server in the cluster). I have to bring all of them up and then be able to use the system. What kind of behavior is it? Is it the fence of OCFS2? Below is my configuration. aopcer13:~ #

Hi, I hope this is not OT. I searched through the archives but didn''t find anything really answering my question. I want to create a cluster of two firewalls with Linux-HA so that if the primary fail, the secondary firewall will take over. Note that I don''t care about syncing states between firewalls, they will just have to reconnect :) It''s a typical

Greetings, There are 2 imminent releases coming soon to a download server near you: 1. GlusterFS 3.2.6 - a maintenance release that fixes some bugs. 2. GlusterFS 3.3 beta 3 - the next iteration of the exciting new hotness that will be 3.3 You can find both of these in the "QA builds" server: http://bits.gluster.com/pub/gluster/glusterfs/ There are source tarballs and binary RPMs

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a machine running 2.6.18-rc3 with a bridge config that looks like this: cr1:~# brctl show bridge name bridge id STP enabled interfaces vlan100 36b0.0007e90f40c1 yes eth0.100 eth2.100 vlan101 5dc0.0007e90f40c1 yes

Does anybody knows if is there a certified procedure in to backup a RAC DB 10.2.0.3 based on OCFS2 , via split mirror or snaphots technology ? Using Linux LVM and OCFS2, does anybody knows if is possible to dinamically extend an OCFS filesystem, once the underlying LVM Volume has been extended ? Thanks in advance Riccardo Paganini

Hello, I have two OCFS file file systems mounted at /ocfs_1 and /ocfs_2. I have unmounted both OCFS file systems and was trying to then offline and unload OCFS. The offline command failed with - # ./o2cb offline Stopping O2CB cluster ocfs2: Failed Unable to stop cluster as heartbeat region still active Looking at the processes on this box shows a number of OCFS processes are still active -

Hi, i dont seem to be able to get ocfs running on RH3 U8 32Bit [root@libra-devb-db1 root]# uname -a Linux devb-db1.mydomain 2.4.21-47.ELsmp #1 SMP Wed Jul 5 20:38:41 EDT 2006 i686 athlon i386 GNU/Linux [root@devb-db1 root]# cat /etc/redhat-release Red Hat Enterprise Linux AS release 3 (Taroon Update 8) [root@devb-db1 root]# rpm -ivh ocfs-2.4.21-EL-smp-1.0.14-1.i686.rpm Preparing...

I also sent this to OCFS2-devel but no response so far. So... I noticed that OCFS2 got updated in the last few days. I just tried to do a build and got this: [root@linuxjohn2 trunk]# make make -C src make[1]: Entering directory `/root/ocfs2/trunk/src' make[1]: *** No rule to make target `inc/io.h', needed by `alloc.c'. Stop. make[1]: Leaving directory `/root/ocfs2/trunk/src'

Hi to all, this is My first time on this mailinglist. I have a problem with Ocfs2 on Debian etch 4.0 I'd like when a node go down or freeze without unmount the ocfs2 partition the heartbeat not fence the server that work well ( kernel panic ). I'd like disable or heartbeat or fencing. So we can work also with only 1 node. Thanks

The following patch adds ocfs support to blkid. --rusty # This is a BitKeeper generated patch for the following project: # Project Name: Ext2 filesystem utilities # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.1327 -> 1.1328 # lib/blkid/probe.c 1.15 -> 1.16 #

I am in the middle of rolling RHEL 4 update 5 ( 2.6.9-55) through my servers. We use a development, QA, and production rollout. Unfortunately I have ocfs members in each of these groups that need to share filesystems. The network compatibility issues between ocfs2 tools 1.2.4 and 1.2.5 are causing the members to not be able to operate with ocfs. Hence this breaks my systems or causes me to

Hi everybody, My problem is that I want to add a new node to an existing RAC with ocfs2, without stop the database. If I add a new node to an existing ocfs cluster, do I need to stop the ocfs in the others nodes of the cluster? I've tried to do it without stop the ocfs in the others nodes but I get the following error: