similar to: Filesystem Block Size w// DB_BLOCK_SIZE

I have four database servers in a high-availability, load-balancing configuration. Each machine has a mount to a common data source which is an OCFS2 v1.4 file-system. While working on three of the servers, I restarted the IP network and found after-wards the fourth machine hung. I could not reboot and could not unmount the ocfs2 partitions. I am pretty sure this was all caused by my taking down

Hi, I have 2 NIC and wants to use both NIC for load balancing and fault tolerance. - Quick question if NIC bonding in Redhat is supported by OCFS2? - If yes which mode bonding is supported? Thanks Raheel -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everbody this is my first post, I have two test server .(Both of them is idle) db1 : RHEL4 OCFS2 db2 : RHEL3 OCFS I test the IO both of them The result is below. db1(Time Spend)db2(Time Spend)OS Test Command dd (1GB) (Yazma)0m0.796s0m18.420stime dd if=/dev/zero of=./sill.t bs=1M count=1000 dd (1GB) (Okuma)0m0.241s8m16.406stime dd of=/dev/zero if=./sill.t bs=1M count=1000 cp

Hi everbody this is my first post, I have two test server .(Both of them is idle) db1 : RHEL4 OCFS2 db2 : RHEL3 OCFS I test the IO both of them The result is below. db1(Time Spend)db2(Time Spend)OS Test Command dd (1GB) (Yazma)0m0.796s0m18.420stime dd if=/dev/zero of=./sill.t bs=1M count=1000 dd (1GB) (Okuma)0m0.241s8m16.406stime dd of=/dev/zero if=./sill.t bs=1M count=1000 cp

Hi, Does OCFS require NAS hardware to run or does normal PC hard disk work? Thanks, Pete -------------- next part -------------- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20081219/1bc9110b/attachment.html

Hi All, I inherited a 4-node ocfs2 cluster and recently 2 ocfs2 filesystems were added to be use as temp tablespace.?One of the four nodes rebooted during the ?creation of the tablespace and hanged at the message below...and it just sits there. If I put the server into rescue mode and comment out all the filesystems it boots up fine and than I can mount the ocfs2 filesystem manuelly but it cannot

Hi, I''m preparing a personal TPC-H benchmark. The goal is not to measure or optimize the database performance, but to compare ZFS to UFS in similar configurations. At the moment I''m preparing the tests at home. The test setup is as follows: . Solaris snv_37 . 2 x AMD Opteron 252 . 4 GB RAM . 2 x 80 GB ST380817AS . Oracle 10gR2 (small SGA (320m)) The disks also contain the OS

Hi , I'm disperated I've recently installed FreeBSD 4.8 ,and all at the first look was ok , this was only a try in a small partition , and now I have decided to install it in a bigger partition , so I've downloaded the 5.1 ISO (to give it a try too) and I've tried to BURN it with "burncd" . Now, I've noticed that in the DEV directory there are the devices

Hi, I sent an email to Mark Fisheh of Oracle Corp. & posted this issue at OTN under Linux thread this morning. I hope that someone among you might have experienced this and can help. On that basis, I am sending this to you too. I am stuck & will really appreciate if you can shed some light on this. Thanks. Anjan

an ocfs-volume was nearly full (only 800MB free). i deleted some datafiles to free space: $ df -h . Filesystem Size Used Avail Use% Mounted on /dev/sdp1 10G 5.3G 4.8G 53% /db/DPS so there are more than 4GB available. $ sqlplus /nolog SQL*Plus: Release 9.2.0.4.0 - Production on Wed Sep 1 12:57:48 2004 Copyright (c) 1982, 2002, Oracle Corporation. All rights

I have a 2 node cluster of HP DL380G4s. These machines are attached via scsi to an external HP disk enclosure. They run 32bit RH AS 4.0 and OCFS 1.2.4, the latest release. They were upgraded from 1.2.3 only a few days after 1.2.4 was released. I had reported on the mailing list that my developers were happy, and things seemed faster. However, twice in that time, the cluster has gone down due

Hi All, Is there a way to tune the zfs prefetch on a per pool basis? I have a customer that is seeing slow performance on a pool the contains multiple tablespaces from an Oracle database, looking at the LUNs associated to that pool they are constantly at 80% - 100% busy. Looking at the output from arcstat for the miss % on data, prefetch and metadata we are getting around 5 - 10 % on data,

I've been using OCFS2 on a 3 way Centos 5.2 Xen cluster for a while now using it to share the VM disk images. In this way I can have live and transparent VM migration. I'd been having intermittent (every 2-3 weeks) incidents where a server would self fence. After configuring netconsole I managed to see that the fencing was due to a heartbeat threshold timeout so I have now increased

I'm using ocfs2 and all modules from Suse (SLES9), no self compilations. Here are the details: * 32-bit machine (writing to ocfs2 partition/LUN and where the corruption was reported): Kernel: 2.6.5-7.257-bigsmp #1 SMP i686 i386 GNU/Linux OCFS2 rpms: ocfs2console-1.2.1-4.2 ocfs2-tools-1.2.1-4.2 o2cb_ctl -V: o2cb_ctl version 1.2.1 /etc/init.d/o2cb status: Module "configfs":

Just a few quick questions.. Does rsync copy open files? If so, does file integrity remain intact? I’m looking to backup IIS log files and maybe Oracle and SQL Server DB files. If rsync isn’t appropriate, what would you recommend? Thanks for your time, Mark J. de Jong ,.,.,.,...,.,,.,..,.,....,.,..,.,..,.,.,,.,...,..,,... Senior Network Engineer - Secure Dog Hosting, Inc. P.703.256.2869

We are using a platform from AmarFone Inc. It great full featured , everything you want to run a calling card and does not cost your a lot of money. Their support is awesome. You can contact them at sales@amarfone.com. Ehsanul Karim

hi, i have a problem with ocfs. i did some tests with dbms_stats on a 2-node RAC and got the following error: Thu Feb 17 15:36:31 2005 KCF: write/open error block=0x7800 online=1 file=13 /db/GKEZ/tablespaces/voeb/idx01_kez.dbf error=27072 txt: 'Linux Error: 5: Input/output error Additional information: 30719' Automatic datafile offline due to write error on file 13:

it seems that word can not read encapsupalted postscripts generated by R I used this command postscript("output.eps",horizontal=F,onefile=TRUE) since onefile=TRUE produces an encapsualted postscript actually what I'm trying to do is to insert the postsript file into a word document since other formats like jpeg and bmp do not reproduce the same quality like postscript formats any

hi, i am trying to install oracle rac on fedora core 6 through iscsi. when i try to mount, mount.ocfs2: Invalid argument while mounting /dev/mapper/rac-crs on /mnt/crs. Check 'dmesg' for more information on this error. error log in dmesg, ocfs2: Unmounting device (253,11) on (node 255) (27354,0):ocfs2_parse_options:753 ERROR: Unrecognized mount option "datavolume" or missing

Dear List, Say, we generate data like this- dat<-rnorm(1000,1,2) hist(dat) How do i make the histogram, say, red (col = 2) before X = dat = 0, and rest say, green (col = 3) beyond X = dat = 0 in R? The resulting histogram could be like this http://ehsan.karim.googlepages.com/histogram.JPG (edited) Thanks in advance. Ehsan http://ehsan.karim.googlepages.com/diaryofastatistician