similar to: OCFS2 with Loop device

Hi everyone; I have a problem on my 10 nodes cluster with ocfs2 1.2.9 and the OS is RHEL 4.7 AS. 9 nodes can start o2cb service and mount san disks on startup however one node can not do that. My cluster configuration is : node: ip_port = 7777 ip_address = 192.168.5.1 number = 0 name = fa01 cluster = ocfs2 node: ip_port =

I have a setup with lot's of small files (Maildir), in 4 different volumes and for some reason the volumes are full when they reach 60% usage (as reported by df ). This was ofcourse a bit of a supprise for me .. lots of failed writes, bounced messages and very angry customers. Has anybody on this list seen this before (not the angry customers ;-) ? Regards, =paulv # echo "ls

I looked around, found older post which seems not applicable anymore. I have a cluster of 2 nodes right now, which has 3 OCFS2 file systems. All the file systems were formatted with 4 node slots. I added the two news nodes (by hand, by ocfs2console and o2cb_ctl), so my /etc/ofcfs/cluster.conf looks right: node: ip_port = 7777 ip_address = 192.168.201.1 number = 0

An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20110303/0fbefee6/attachment.html

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

I people, i install the ocfs in my virtual machine, with centos 5.3 and xen. But when i turn off the machine1, the ocfs start the fencing off the machine2. I read the doc in oracle.com, but could not solve the problem. Someone help? My conf and my package version. cluster.conf node: ip_port = 7777 ip_address = 192.168.1.35 number = 0 name = x1 cluster

Hello. What we have: 2x Debian 5.0 x64 - 2.6.32-20~bpo50+1 from backports DRBD + OCFS2 1.4.1-1 I have both node reboot every day on my tests. On heavy load it have to 1-3 hour to reboot, on idle about 20 hours. I not sure what it is a OCFS2 related but if I not mount OCFS2 partition - I don`t get this reboot. In attach screenshoot with system console on what error. Nothing special in logs.

We're trying to setup 3 PRDM partitions (VMware) across 2 nodes. As long as only one is configured in cluster.conf, there's not problem. As soon as we try to use 2 or more we get issues. It looks the same as bug 636: http://oss.oracle.com/bugzilla/show_bug.cgi?id=636 I posted my cluster.conf and command line results there. I'm including them here in the hopes that someone on this

Hi, I was interested in a simple configuration with 2 machines sharing a drbd drive in primary-primary mode. I am done with drbdb, but I am a newbie to ocfs, so wanted some help. I have 2 machines, with centos5.2 , kernel 2.6.18-8.el5. I downloaded the following packages : ocfs2-2.6.18-92.el5-1.4.1-1.el5.x86_64.rpm ocfs2-tools-1.4.1-1.el5.x86_64.rpm ocfs2console-1.4.1-1.el5.x86_64.rpm (download

Ubuntu 14.04, drbd Hi On a drbd Primary node, when attempting to mount our cluster partition: sudo mount -t ocfs2 /dev/drbd1 /cluster we get: mount.ocfs2: Unable to access cluster service while trying to join the group We then call: sudo dpkg-reconfigure ocfs2-tools Setting cluster stack "o2cb": OK Starting O2CB cluster ocfs2: OK And all is well: Aug 22 13:48:23 uc1 kernel: [

All, We are having some problems getting OCFS2 to run, we are using kernel 2.6.15 with OCFS2 1.2.1. Compiling the OCFS2 sources went fine and all modules load perfectly. However, we can only mount the OCFS2 volume on one machine at a time, when we try to mount the volume on the 2 other machines we get an error stating that another node is heartbeating in our slot. When we mount the volume

Hi , I am getting the error "No space left on device" on a device with free space which is ocfs2 filesystem. Additional information is as below, [root at sai93 staging]# debugfs.ocfs2 -n -R "stats" /dev/sdb1 | grep -i "Cluster Size" Block Size Bits: 12 Cluster Size Bits: 15 [root at sai93 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release

Hello, I have an active, balanced webcluster with 2 SLES10SP2 nodes, both running ocfs2 with an iscsi target. The ocfs2 volume is mounted on both nodes. Everything works fine, except sometime the load on both systems go as high as 200, then both systems freeze, only reboot helps to regain control. I noticed that this behaviour does not occur when the cluster is NOT balanced. When the load on both

I have installed OCFS2 on two nodes SuSE 10. Seems all works superb and nice from the first sight. But, /dev/sda ocfs2 rac1 is not sharing through net (port 7777) with rac0. On both nodes I have 500Mb /dev/sda disks that are mounted (and are ocfs2). But they did not share the content with each other (files and folders in it). So when I am creating the file in one node I am expecting to

Hi guys! I can?t find an answer in google, so my last hope is this mailing list. Story. I have two servers with same arrays. Servers connected by DRBD. I used ocfs2 as file system, also I used NFS4 to access to the ocfs2 drive. I do not have any idea, but the allocated descriptors in /proc/sys/fs/file-nr increasing every time while drive accessed. So after some time allocated descriptions over

# uname -r 2.4.21-20.ELsmp [root@hp2620-2 root]# rpm -qa | grep ocfs ocfs-tools-1.0.10-1 ocfs-support-1.0.10-1 ocfs-2.4.21-EL-1.0.13-1 [root@hp2620-2 root]# /sbin/load_ocfs /sbin/insmod ocfs node_name=hp2620-2-eth1 ip_address=10.1.2.101 cs=1913 guid=8D65C7CEECF9EBE638BD0013215BD6E9 comm_voting=1 ip_port=7000 insmod: ocfs: no module by that name found load_ocfs: insmod failed [root@hp2620-2 root]#

Hi, I have added heartbeat mode as global, but when I do a mkfs and mount, and then check the mount, it says I am in local mode. Even /sys/kernel/config/cluster/ocfs2/heartbeat/mode says local. I am running CentOS with 3.x kernel, with ocfs2-tools-1.6.4-1118. mkfs -t ocfs2 -b 4K -C 1M -N 16 --cluster-stack=o2cb /dev/sdb mount -t ocfs2 /dev/sdb /mnt -o

We upgraded our production database cluster (6 node) from EL4 Update 5 to EL5 Update 5, including upgrading OCFS2 from 1.2.9 to 1.4.4. We are now noticing slowdown of batch jobs in Oracle, while hotbackup runs faster. One thing we saw is that journal mode changed from write-back to ordered, as we don't specify journal mode during mount. Oracle sees this as slowdown based on higher IO latency,

Hallo, I have two servers and both are connected to external array, each by own SAS connection. I need these servers to work simultaneously with data on array and I think that ocfs2 is suitable for this purpose. One server is P4 Xeon (Gentoo linux, i386, 2.6.22-r2) and second is Opteron (Gentoo linux, x86_64, 2.6.22-r2). Servers are connected by ethernet, adapters are both Intel

I have a relatively new test environment setup that is a little different from your typical scenario. This is my first time using OCFS2, but I believe it should work the way I have it setup. All of this is setup on VMWare virtual hosts. I have two front-end web servers and one backend administrative server. They all share 2 virtual hard drives within VMware (independent, persistent, &