similar to: 4 disk raidz1 with 3 disks...

Hi list, My zfs write performance is poor and need your help. I create zpool with 2 raidz1. When the space is to be used up, I add 2 another raidz1 to extend the zpool. After some days, the zpool is almost full, I remove some old data. But now, as show below, the first 2 raidz1 vdev usage is about 78% and the last 2 raidz1 vdev usage is about 93%. I have line in /etc/system set

Hello, I'd like to develop a codec for the Ogg Vorbis algorithm on a DSP (controller?) hardware platform. We've got 2 (3) main applications: 1) the codec should be used for 2 channel simultaneous message recording/playback on flash EPROM. 2) the codec should be used for streaming audio over IP or Ethernet/intranet networks. 3) for large system, the PC should serve as a storing device We

Hi, Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine. With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line polarity reversal. Stutter dialtone is generated as expected. Has anyone else seen this? Is there anything special I need to do for 1.6.1 to make FSK MWI work? Thanks, --Barry

Hello, All :) Regarding to incoming caller ID on PSTN line, which one is best supported by asterisk: is it FSK ETSI or FSK US? I bought some caller ID converter hardware (convert DTMF to FSK and vice versa) but still asterisk can not detect it. The converter has a switch FSK ETSI or FSK US This is what I put in /etc/asterisk/chan_dahdi.conf ... cidsignalling=bell cidstart=ring ... If after

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

I am an Asterisk newby, and I cannot seem to get Caller ID information from our T1 line. When calls appear at the phones, they say the call came from "asterisk" and unknown number. I know how Caller ID information is passed on an analog phone line (between the rings) but with a T1 line, I don't know technically how it is done. I don't see the caller's number in the

So, I took four 1.5TB drives and made RAIDZ, RAIDZ1 and RAIDZ2 pools. The sizes for the pools were 5.3TB, 4.0TB, and 2.67TB respectively. The man page for RAIDZ states that "The raidz vdev type is an alias for raidz1." So why was there a difference between the sizes for RAIDZ and RAIDZ1? Shouldn''t the size be the same for "zpool create raidz ..." and "zpool

Hi, for zfs raidz1, I know for random io, iops of a raidz1 vdev eqaul to one physical disk iops, since raidz1 is like raid5 , so is raid5 has same performance like raidz1? ie. random iops equal to one physical disk''s ipos. Regards Victor -- This message posted from opensolaris.org

Hi Martijn Thank you for the link. Could those old installers be taken down or at least moved to a 'old' folder ? I'm new to this, so I am a good example of how a new user works. I use google, or I visit the homepage, and then I download and install. As that installer version doesn't work at all, it cant convert WAV files, I suggest to delete it completely. Regards, Jonny On

Moving them will break links, and they should be kept for future reference. The installer works properly on Windows XP and earlier, it was broken because of the UAC introduced in Vista. Op 16-09-14 om 15:56 schreef Notes Jonny: > > Ping > > On 3 Sep 2014 10:29, "Notes Jonny" <jongmob at gmail.com > <mailto:jongmob at gmail.com>> wrote: > > Hi

Had an idea, could someone please tell me why it''s wrong? (I feel like it has to be). A RaidZ-2 pool with one missing disk offers the same failure resilience as a healthy RaidZ1 pool (no data loss when one disk fails). I had initially wanted to do single parity raidz pool (5disk), but after a recent scare decided raidz2 was the way to go. With the help of a sparse file

Hi When i change my classes in the LIB folder they are not updating on the server. My server is in development mode. Any ideas why? Any help is appreciated Thanks, Chris -- Posted via http://www.ruby-forum.com/.

I want tinc to listen locally on loopback, so that port 655 is not exposed on any system interfaces. Can't tinc make outbound connections when listening on loopback? I can't see any reason why it should. This system will never have other tinc daemons connect to it, it will only ever connect to other tinc daemons in order to establish a VPN connection. -- Jonny Tyers On Sat, 17 Nov 2018

I currently have a 7x1.5tb raidz1. I want to add "phase 2" which is another 7x1.5tb raidz1 Can I add the second phase to the first phase and basically have two raid5''s striped (in raid terms?) Yes, I probably should upgrade the zpool format too. Currently running snv_104. Also should upgrade to 110. If that is possible, would anyone happen to have the simple command lines to

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3050 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/33760a15/smime.bin

Hi, I am using centos4 and am trying to build a source kernel dom0 with xen. I cloned a copy of the xen repository and did the following hg clone http://xenbits.xensource.com/xen-2.0.hg cd xen-2.0.hg/xen make dist cd linux-2.6.11-xen0 make ARCH=xen oldconfig make modules make modules_install make install After which point I get the following error : CC drivers/xen/balloon/balloon.o

Joao Carlos Mendes Luis <jonny@coe.ufrj.br> wrote: > I think it would be useful if samba had a utmp log interface. > I know that it's possible to see who is logged with smbstatus, but > sometimes a simple who(1) or w(1) is more efficient and ubiquitous. If you were to search for 'wtmp' in the 1997 archives (via the Samba web pages), you would find one interesting

Off topic but I am after a DECT phone to connect to my sipura 3000 that has a FSK VMWI light or flashing envelope on the LCD screen. Any ideas Chris

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

Running a zpool scrub on our production pool is showing a scrub rate of about 400K/s. (When this pool was first set up we saw rates in the MB/s range during a scrub). Both zpool iostat and an iostat -Xn show lots of idle disk times, no above average service times, no abnormally high busy percentages. Load on the box is .59. 8 x 3GHz, 32GB ram, 96 spindles arranged into raidz zdevs on OI 147.