similar to: Virtual devices disappear in dladm show-link

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

I decided to take a stab at 6601421 dladm set-linkprop should support multiple -p options along with some related linkprop fixes, but when I looked into dladm.c, was surprised to find that "dladm_parse_props()" is called from do_create_aggr and do_create_vlan in addition to the expected (by me, at least) do_create_vnic *linkprop functions. What happened here? Why do we pass in

Hi All, I have bfu''ed to net-virt_xb-21_snv_81_021308. The dladm command on my machine does not have create-etherstub option. Please let me know what could be the issue. Thanks Khushal

Hi, I am trying to install CentOS on an Opensolaris Dom0. virt-install fails with an error in virDomainCreateLinux(). Is this a known issue? Am I missing some step? manoj@mowgli:~$ uname -a SunOS mowgli 5.11 snv_101b i86pc i386 i86xpv Solaris manoj@mowgli:~$ pfexec virt-install What is the name of your virtual machine? centos How much RAM should be allocated (in megabytes)? 512 What would

(Bcc''ed to networking discuss). Hi All, Have enclosed man page draft for dlstat(1M) herewith. This is part of the effort to gain better visibility into network traffic in light of crossbow features like virtual NICs, interrupt vs. polling modes etc. This in turn would greatly assist network performance analysis. It is also aimed at segregating link/flow configuration from

Basically what I am trying to attempt here is to have multiple vm''s in a private network that is seperate from any of the physical networking devices. So far all I have really been able to do is connect the vm''s to an etherstub, but cannot get them to communicate with eachother. I have been using this (http://blogs.sun.com/droux/entry/private_virtual_networks_for_solaris) as a

Hi, Is there any way to add VNIC to the domU? # virsh attach-interface mydomU network myvnic1 # libvir: XML error : missing source information for device myvnic1 It''s SXCE105. -- Regards, Piotr Jasiukajtis | estibi | SCA OS0072 http://estseg.blogspot.com

After googling around and reading the material on the opensolaris.org xvm community site, I still do not understanding the configuration of networking and would appreciate some assistance. Problem: I have successfully installed an hvm domU running Windows XP on opensolaris 2005.11 (build 94), and when the laptop (lenovo t61, core2 9300) is connected via the e1000g0 interface networking works

Hi the Crossbow team, I am testing my UV fastpath bits and I found several issues that need your suggestion: 1. dladm show-usage won''t work if UV fastpath is enabled. Since the link usage data are collected based on the statistics of the mac_client_impl_t, and UV fastpath skips the GLDv3 processing, that won''t be available. I don''t see a solution for this except

Folks, I''m playing with maxbw on links (as opposed to flows) in Crossbow, and I have a couple of questions. First, the limts seem only advisory. The first example has the main host talking to a zone that has 172.16.17.100 configured on znic0. When there is no maxbw, the throughtput is as expected; when maxbw is 55M the throughput only drops to 76 Mbps: # netperf -H

I have installed on a VirtualBox vm the crossbow ISO Now I''m trying to create the network map described in the "getting started" pdf I have this situation: On global zone, I have the real NIC: e1000g0 with ip 10.0.2.15 (VirtualBox NAT this IP, I can get web access with it) I have created an etherstub (etherstub n?2) with 2 vnics (vnic5 and vnic6), I''ve plumbed

Hi. Can a virtual switch have more than one physical NIC? Or, can a VNIC have more than one NIC? (this is the same question, I think)? emike

Ok, I''m hoping this is a fairly trivial issue, and I''m missing something. I''m trying to use Solaris zones (Nevada Build 117) to act as a DMZ and a router, using exclusive IPs, VNICs (from Crossbow), and connecting to the internet (static IP from my ISP). I''ve got the DMZ working - that zone sees the internet, can do name lookups, ftp, telnet, ssh, etc etc etc.

Hi, I''m afraid I have some problems understanding how crossbow is supposed to work ;) On my machine (OpenSolaris, snv_111) I''m running VirtualBox with couple of linux / XP installation and additionally a zone with exclusive IP. My network configuration looks like this: [6]elsinore:~>dladm show-link LINK CLASS MTU STATE OVER bge0 phys 1500 up

Following is a short description on assigning priorities to a link (via dladm). Flows will have a similar mechanism (via flowadm). thanks, -venu ---------------------------------------------------------------------------- The components associated with a link or flow, such as Soft Ring Sets, Soft Rings and squeues, have kernel threads processing inbound/outbound packets. The scheduler

Hi, I''m running snv_89 on an X4150 with a CentOS-5 guest. I cannot seem to get my second network interface to work properly. I followed the virt-install instructions, and even saw the FAQ entry about adding a second network instance in the XML config. I see my second device in the guest but it''s either connected to the wrong interface or not at all. I''d like to

Hi all, Link protection is a new feature we are planning to introduce to Solaris and we would like to solicit your feedback on it. Please see attached document for details.

1 simple question about network statistics for vnics: We noticed that the statistics for vnics (used by Virtualbox guests) are not there. When the nics are plumped in the host OS, we do see them showing up, but all all records are 0. Can someone tell me how to get the correct network info via snmp on the Vbox Host?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING:

How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest