similar to: connecting 2 servers using an FC card via iSCSI

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hi Team, Is there any body got any experience on setting up a virtualized environment in which the vm's can access a fiber channel SAN storage connected to host? the host access the SAN through its own HBA, but the hba is not recognized inside the virtual machines. Please let me know the step to go through this. Regards -------------- next part -------------- An HTML attachment was

Hi, folks, I''m attempting to run an e-mail server on Xen. The e-mail system is Novell GroupWise, and it serves about 250 users. The disk volume for the e-mail is on my SAN, and I''ve attached the FC LUN to my Xen host, then used the "phy:/dev..." method to forward the disk through to the domU. I''m running into an issue with high I/O wait on the box (~250%)

Hi Sanjoy: >> Now in the above CFG %val can be folded to 10, but in reality you need >> a PHI of 10 and 20 Quick answer: folding %val to 10 is OK, but, I would prefer it to be 'undef' or even catch it in the verifier as it is a programmer/frontend error. Details are in the second half of my reply. I would like to start with the thought experiment you suggested, as it might

Hi Sanjoy, >> I'm not familiar with fiber-type APIs, but I assume fiber_fork is like >> setjmp, in that it can "return twice"? Yes, user-mode stack switching API are somewhat similar to setjmp. Here are links to a doc page and implementation, just in case you are curious: http://www.boost.org/doc/libs/1_59_0/libs/context/doc/html/context/context.html

I think I got it. Original model (with coro.fork and two-way coro.suspend) will work with a tiny tweak. In the original model, I was replacing coro.suspend with br %return in original function. The problem was coming from potential phi-nodes introduces into return block during optimizations. Let's make sure that there is only entry into the return block. In the original model, ReturnBB had

Please forgive the (almost?) OT post. (and the fact that I need a clue-bat) We've got a situation at one of our sites where a construction crew is likely to dig up our conduit which houses some data fiber and one pair of fiber used to tie a Definity 3gsi at a small office building to the rest of the phone system (school district). We're using a pair of Aeronets to the data network stays

As we have fiber channel, and we have fiber connections, sometimes direct p-to-p, where we could run it into our fiber channel switch, and share a disk array over hundreds of feet, to hundreds of miles, but where servers wouldn't be able to talk via fast enough network connection, does (or will) ocfs2 support a mode where there is no network connection needed, and all voting, and cluster

Hi ! As some of you might know, Apple has discontinued it's xServes server as of january 31st 2011. We have a server rack with 12 xserves ranging from dual G5's to dual quand-core xeon lastest generation, 3 xserve-raid and one activeraid 16 TB disk enclosure. We also use xSan to access a shared file system among the servers. Services are run from this shared filesystem, spreaded

I am relatively new to R, but am intrigued by its flexibility. I am interested in quantile regression and quantile estimation as regards to cotton fiber length distributions. The length distribution affects spinning and weaving properties, so it is desirable to select for certain distribution types. The AFIS fiber testing machinery outputs a vector for each sample of type c(12, 235, 355, . . .

I have a recently installed Mellanox VPI interface in my server. This is an InfiniBand interface, which, through the use of adapters, can also do 10GbE over fiber. I have one of the adapter's two ports configured for 10GbE in this way, with a point to point link to a Mac workstation with a Myricom 10GbE card. I've configured this interface on the Linux box (eth2) using

Hi, I'd like to use PSTN and analogic telephone with a Asterisk server which works on a LAN connected to the outside with fiber optic, on which voice stream passes too. Do I need some particular solution, some particular card to make it works or I just need a Digium or similar fxo card? Thanks, Bob __________________________________________________________________ Tiscali ADSL Senza Canone,

Hi, I have a large data set that I input as a matrix, where I have 1:x rows with names AX, then x+1: y rows named AY, etc. The idea is that I have to count how many rows exactly I have with name AX and how many I have with name AY (or find which row numbers have names AX). Is there any way in R to count a number of rows with a name matching a required pattern? Thanks in advance, Katie --

Hi all, I found a article about Hyper-V virtual Fiber Channel, I think this will make Failover Cluster work if KVM has the same feature. http://technet.microsoft.com/en-us/library/hh831413.aspx Hyper-V uses NPIV for virtual Fiber Channel, I have read some article about KVM NPIV, but how can I config it with libvirt? Any body can show me some example? On Wed, Aug 14, 2013 at 2:33 PM, Timon Wang

Hello, Any one know how to enable Fiber Channel QLOGIC driver for xen kernel? This driver is available in CentOS4.3 as default. But when i compile xen-3.0.2-2 with linux-2.6.16 or xen-3.0.1with linux-2.6.12, the driver is not there. I tried to turn on QLOGIC by using "make menuconfig" and modified .config file but there is no change in /lib/modules/2.6.x-xen/kernel/drivers/scsi after

Hello everyone, As I am new to the asterisk community (although have been on the list reading for about 6 months) I wanted to see what users would recommend for security to protect several asterisk/ vicidial servers over a fiber connection. Currently I have a managed switch (Tellabs 8813-310) from time warner but I am having intrusion issues on my linux server which I think are contributing

I found some ancillary information that seems to indicate that there is a driver that will allow a D-Link DGE-550SX Gigabit fiber NIC to work under FreeBSD 4.x. Can anyone confirm or refute this, or provide additional information? If the NIC is not supported, is there a recommendation for a gigabit fiber NIC that works well under 4.8? Thanks, Steve

I sincerely apologize if this has been covered before on the forums. I tried searching my mailbox of over 37K messages from this group, but my search functionality is broken at present. I''m trying to understand if XCP has any limitations with regards to storage networks based on Fiber Channel. Specifically, do I need a cluster technology with XCP to enable shared LVM access across nodes

Seeing as IPV4 is near it's end of life (http://www.internetnews.com/infra/article.php/3915471/IPv4+Nearing+Final+Days.htm), I'm curios as who know whether everyone is ready for the changeover to IPV6? Is anyone using it in production already, and what are your experiences with it? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog:

I have a customer that has two buildings that are connected with a fiber link. We have a single Asterisk server to cover both buildings. Now the customer went and bought an overhead paging system for the remote building and they want to integrate it with Asterisk. Is there a device that can connect over IP or an ATA that has an audio output port? The buildings are about 500 meters apart so we