similar to: Bug#511579: xen-utils-common: Confirmation. This issue broke my system after upgrade.

Package: xen-utils-common Version: 3.2.0-2 Hello We used the script "network-bridge" on our Xen servers based on "etch" (xen-utils-common 3.0.3-0-2) to setup bridge configuration. This script created a bridge "xenbr0", renamed "eth0" to "peth0", renamed "veth0" to "eth0" and added "peth0" and "vif0.0" to

anyone know how to force network cards talk at gig speeds when all it wants to do is establish a connection at 100mbits root at host1 [/backup/cpbackup/daily]# mii-tool eth0: negotiated 100baseTx-FD, link ok eth1: negotiated 100baseTx-FD flow-control, link ok 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) Subsystem: Broadcom

On Mon, Nov 10, 2008 at 10:01 AM, Fernan Aguero <fernan@iib.unsam.edu.ar> wrote: > > Date: Wed, 29 Oct 2008 14:05:22 -0300 > From: Fernan Aguero <fernan@iib.unsam.edu.ar> > To: Kirk Strauser <kirk@strauser.com> > Cc: freebsd-stable@freebsd.org, d@delphij.net, > John Baldwin <jhb@freebsd.org>, re@freebsd.org > Subject: Re: [FreeBSD] Fix for

Hi all, i have a xen 4.3 installation and would like to have a bridge bond szenario: *** eth0 eth1 | | bond0 | br0 | vif = [ ''bridge=br0,mac=xx:xx:xx:xx:xx:xx'' ] *** With the network script in debian wheezy *** /etc/network/interfaces auto bond0 iface bond0 inet manual slaves eth0 eth1

The systems will be operating the Center 5.2 32-bit, below the model, one will doubt that the system of controlling the media to do a RAID 0+1 PowerEdge SC1435 Processor AMD Opteron ? 2344HE Quad Core (1.7 GHz, 4x512 KB L2 cache, 1 GHz HyperTransport) - BRH8835 edit Memory 8GB Memory, 667MHz (4x2GB), Single Ranked Primary controller Integrated SATA Controller - No RAID edit First Hard Drive SAS

Hi, I have two physical machines connected through a switch in a 192.168.1.* subnet. Dom0''s are assigned static ip addresses 192.168.1.100, 192.168.1.101 respectively. Dom0''s can ping each other. Each physical machine has a domu guest and static address assigned to domu''s are 192.168.1.200, 192.168.1.201 respectively. However domu''s can neither ping each other

Hello, I have an interrupt conflict between a two port pci-e serial card and the onboard ethernet controllers in a PowerEdge 850. I'm running kernel 2.6.18-194.26.1.el5PAE with bios revision A04. In every instance, the two serial ports have been allocated the same interrupts as the two ethernet controllers. I have tried many kernel boot options, including acpi=off, pci=noirq, acpi=noirq.

Dear all, Actually, I want to create my own test-bed based on xen hypervisor with centos prefered. However, all I have is one desktop (with a good hardware performance). So it possible to have a dual-boot (a linux for daily use and the other for the test-bed) ? Regards -- Jihed M’SELMI http://about.me/jihed.mselmi _______________________________________________ Xen-users mailing list

Hello all, I try to set a ntp server in domainU, but other vms cannot synchronizes with the ntpserver VM. When I choose to set ntp server in domain0, synchronization can be done. Why is that? I install xcp-xapi 1.5 on ubuntu server 12.04 64-bit. Many thanks! clayton claytonly _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org

On a fresh installation of XCP 1.6 there is no interface in XCP Network Management. While in comman line ifconfig -a shows me both physical interfaces. I would appreciate for an ideas on what. -- Best regards, Makarov Alexey _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may

Hi List, We currently have a very irritating problem with Centos 5.3 x86_64 running on a Dell Poweredge SC1435. The problem is this: We are experiencing frequent kernel panics while using glusterfs and Fuse. Across the cluster of servers, we are experiencing roughly 1 panic every 1-2 days. This wasn't a problem with earlier servers where we used Fedora 6. Here's a kernel panic

Hello, I''ll use a complete SSD in a domU. How can I get the real device for TRIM into domU? Regards, Stefan Kuhne _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hi. I have an old Xen para virt vm which I created using sparse file. Is there any way to convert this vm image to non-sparse without shutting down the vm?. Thanks Paras.

Hey, I''ve been trying to get the gplpv drivers working with Windows 2008 R2 64-bit on both a stock CentOS 5.8 install and CentOS 5.8 w/ Xen 4.1.2 from the gitco repos. I''m getting a BSOD shortly after boot up and it can be seen at http://techmonkeys.org/xen/ -- along with the qemu log. Has anyone had success with these drivers and Windows 2008 R2 64-bit? If so, what am I

Hi, Do you think it''s possible to run Xenserver/XCP or xen from an usb drive or memory card like it''s possible for vmware please ? Is it recommended ? Are there any performance issue :-) ? I would like to dedicate all of the local storage to hosting VMs only. Looking at xen/xenserver/xcp doc, i was wondering why there''s so few tutorial on installing them on usb

Hi, We have a brand new HP Z820 system which is a E5 based sandy-bridge server with NVIDIA Quadro 600 Graphics card. The machine has 32GB RAM and 8 CPUs (16 with Hyper threading enabled) The system has AMI BIOS 2.07 (the latest). We have enabled Hyper-threading, VT-d, VMX in the BIOS. We installed Ubuntu 12.04 first, followed by, XEN installation (the one that is packaged (4.1) along with

1. I''d like to experiment with XCP by creating a nested arrangment - XCP on VirtualBox - but need to know what "version" of Linux to specify when creating the VM. 2. I''m currently using a 32-bit host. (Mageia-1 is/was only available as a 32-bit O/S when I installed it.) Does XCP require a 64-bit architecture? Eric Pretorious Truckee, CA

Hello I''m trying to convert a HVM to PV dom0. The domU is a 10SP2 SLED ( Kernel 2.6.16.60-0.21 i386) and is a SLES11SP2 dom0 (Kernel 3.0.13-0.27-xen 64bit). The truth is that every tutorial I see it differently and I do not know where this error. When I start the domU, pvgrub shows the options but when I select the kenel-xen, returns the error "Boot loader did not return any

I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other