similar to: [Bridge] Misbehaving bridge...

I''m new on this mailing list, reading it for last 4 weeks, ... Need help please... I want to implement tc rules on br0 witch is build of wlan0, wlan0wds0, wlan0wds1? I did something but it doesn''t do good job, it doesn''t give constant flow ... any idea, please if someone already have experiance... OS: Suse 9.0 myshaper

OK What client cards do work? For each of the following: 802.11a 802.11b Media: PCI PCMCIA USB OS: FreeBSD 4.7 Recomendations please Thanks David ----- Original Message ----- From: <john@critchley.biz> To: "vizion communication" <vizion@ixpres.com> Sent: Monday, April 14, 2003 2:04 PM Subject: Re: Annother Wireless network card annother problem > > > > I

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

Hi folks! First post here, so please don't bother if it's not the right place to post those kind of questions. I'm currently running a 4.7-release (upgrade to 4.8 planned but not yet started) on my production box. As I would like to setup a small WLAN (major use for my notebook, other clients are possible) I need to know which cards are really supported. The handbook is IMHO not

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

Hi, I'm nota very good with computers and i'm dealing with a little problem and the problem is this. Okay, so I am trying to download WOW (World Of Warcraft) trial version and to dwl it there opens up a window that starts dwl the game and it is split in 3 parts so it is no problem to dwl the first part but when I started to dwl the second part it starts for few minutes and then there opens

Hello everyone! How are you? Hope you''re well :) Here''s my setup at home: Internet -> (eth1) Comp1 (shorewall, DHCP, dns server, Internet sharing) (eth0) -> Linksys (wireless) ~~~~~~~~~~~~ (wlan0) Comp2 (eth0) -> IP Phone My computer1 is well confiugred, everything was working right and well. I decided to move the IP Phone to the COmputer 2. I was able to make this

Hi, after some time without FreeBSD I installed 7.1 on an IBM Thinkpad T30 (with ZFS root on encrypted geli, works great). Config is: FreeBSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt

I just got the D-Link DWL-G520M PCI wireless card. I'm not interested in super-G or any other post-802.11b feature in particular; the reason I got it was because the marketing materials hinted that (at least some revision of it) had the Atheros chipset. It isn't recognized at all by ath(4) on 5.5. Here is the pciconf -lv section: none0@pci0:14:0: class=0x020000 card=0x3a681186

Good morning, I've inherited an old laptop from my wife that I'd like to use when I travel (it's fairly small with a 12" screen). The bad part is that it is maxed out on memory with 384MB. Has anyone played with using Centos5 on systems with little memory? Ideally, I don't need too much - Firefox, Openoffice, a little Perl/Python/C here and there. I was thinking about using

Does anyone know of an easy to install/use WIFI PCMCIA card for Linux. I am currently running Cent OS 4.0 on my laptop and I have a D-Link DWL-G650 Ver B which will run off of the madwifi Beta drivers. Now I know I can get this to work but I would feel a little better using software that is in production development. Any suggestions and input would be helpful on my new card purchase. The card

Hi, I'll need to buy a new wireless card. I need a recommendation for PCMCIA wireless card that simply works with CentOS out of the box. By "works out of the box", I mean that it doesn't need ndis wrapper (or whatever it is called), kernel hacks, or whatever. Thanks

Hi, I'm working on a Wifi VoIP project specification. It will have almost 8 APs and 20-30 wifi phones. And after some research, I still having some questions ... 1) Are Managed Access Points (and switch controllers) really important to implement good wifi woip (w/ low latency and acceptable handover time) ? 2) What is the difference between (3com WX1200 + 3com AP 3750) and (DES-1228P +

Hi, my box is connected to 3 networks, eth0 eth1 wlan0. I want "my" traffic to go via wlan0 and everything from eth1 NATed to eth0: eth0 192.168.1.10/24 eth1 172.16.1.1/12 wlan0 192.168.10.190/24 I first tried this with two single hosts: iptables -A POSTROUTING -j MASQUERADE -o eth0 -t nat iptables -A POSTROUTING -j MASQUERADE -o wlan0 -t nat echo 200 Forw >>

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

I want to build 2 servers (both running samba) to provide file storage to 2 offices (approx 100 miles apart, linked via DSL) but all data writen to 1 server must also be saved to the other server. Both servers would also allow users to access the data via a VPN thus allowing 1 office with a failed server to access the other server via the vpn and still see the data from both offices. I currently

Hello, I have the AR9285 wireless adaptor on an HP DV6-2128ca notebook. I can see it. it comes up in NetworkManager but never gets an IP. the router is a linksys using WPA/PSK security. Would/could someone please help me out trying to get this to work? Output of several commands follows: dmesg: ath: EEPROM regdomain: 0x69 ath: EEPROM indicates we should expect a direct regpair map ath:

I just installed an Asus PCE-n13 wireless card into one of my CentOS 5.6 systems. It uses the RaLink 2680 chip set and I was able to get the driver loaded using modprobe rt2x00pci.ko. I saw no error and now see that the module is loaded along with mac80211 and other dependencies. Now I need to know how to create the wlan0 device. I can find nothing via Google searches on how to create that