similar to: Moving Maildir email messages and backing things up.

This is probably the problem May 3 16:44:45 kernel: [ 7.068336] nouveau E[ DEVICE][0000:08:00.0] unknown chipset, 0x137000a1 May 3 16:44:45 kernel: [ 7.068401] nouveau E[ DRM] failed to create 0x80000080, -22 May 3 16:44:45 kernel: [ 7.068723] nouveau: probe of 0000:08:00.0 failed with error -22 I can make this card available - if you can tell me an older card that can do the

The correct way has to be one or the other: http://wiki.dovecot.org/LDA/Exim are mutually exclusive with http://wiki.dovecot.org/HowTo/DebianStable It appears that exim can either call dovecot's LDA or make the delivery itself. There may be good reasons to do it one way or the other. ---------------------------------------------------------------- Karl Schmidt

First things first -- I've alluded to this before, but let me be clear -- there is no global database that contains monitor-specific information which is used by any linux drivers. Please forget any notions you had of such a thing existing or being used. The information comes from the EDID blob supplied by the monitor. Presumably hwinfo has a primitive EDID parser, which is where that

This is sort of working -- but I can't get it to do a 4k output. Not sure how the monitor resolution is detected - This monitor is supposed to do 3480x1200 60hz 4:4:4 But the info I get from hwinfo is different. How does nouveau get this information? If it is from an ID - with a list - the list is probably is wrong. # hwinfo --monitor 95: None 00.1: 10002 LCD Monitor [Created at

I have a need to have a live Linux (Debian or sysrescued ) to boot off a hard-drive so that the hard-drive ends up umounted after boot. (for running partimage ). I've gone down the memdisk iso route and read about the issues there - I've seen a way to do this by mounting over nfs (messy) - but I want to do this without the network. I'm thinking that there should be a way to loop

Hello, Acceleration for Pascal cards is coming in Linux 4.12, support for Pascal cards in xorg-video-nouveau is in 1.0.15, and if I remember correctly, on the Mesa-side, you will need >=17.0. Pierre On 02:04 am - May 04 2017, Karl Schmidt wrote: > This is probably the problem > May 3 16:44:45 kernel: [ 7.068336] nouveau E[ DEVICE][0000:08:00.0] unknown chipset, 0x137000a1 > May

Someone might want to add this to the docs - cable list and compatibility list - took me way to long to find. I was trying to find information on my UPS and came up with the following names for the same UPS series. Powerware 5119 Exide name was NetUPS SE Deltec name was PowerRite Pro II (1000VA-3000VA) What I have: The Exide NETUPS SE model PRC2400a p/n 05144038-3904 OUTPUT 2400VA 1600 WATTS

Something came up that Confounded problems in my move from UW-imap to dovecot. I found a problem with the new icedove update in Debian lenny when moving from 1.5.0.13+1.5.0.14b.dfsg1-0etch1 to 2.0.0.9-3 that could look like a dovecot issue. Icedove runs for a while but eventually quits updating the displayed email, yet appears to be working and busy trying to get messages from the server. I

I've been trying to use memdisk with grub2 to boot some iso images -( I've done this without any problem with pxe ) There is a memdisk.mod in /boot/grub/ and I've seen some material talking about this, but no example of a menu. After trying countless permutations - Right now I have : menuentry "Memtest-Plus 4.2" { echo `hello` insmod lvm

On 05/04/2017 04:00 AM, Pierre Moreau wrote: > Hello, > > Acceleration for Pascal cards is coming in Linux 4.12, support for Pascal cards > in xorg-video-nouveau is in 1.0.15, and if I remember correctly, on the > Mesa-side, you will need >=17.0. Thanks - I suspected it was too new. I'm finding the monitor capabilities miss identified even if I use an older card - I'm

On 05/06/2017 12:38 PM, Ilia Mirkin wrote: > The information comes from the EDID blob supplied by the monitor. > Presumably hwinfo has a primitive EDID parser, which is where that > information comes from. A more complete EDID parser is available at > > https://cgit.freedesktop.org/xorg/app/edid-decode/ > > For example, > > $ ./src/edid-decode/edid-decode

This is set up with Win2K boxes sharing a QB file on a SAMBA share. It may be quite different than with 95-98x-ME(Miserable Edition). There are two or more problems - one thing I identified is that it is possible for two computers to connect to the QB(QuickBooks) share using the same quick books logon - something that will cause data corruption. (Something that could have been easily

I was getting a glicthy checkerboard mess at the cursor in some programs (konsol+) with # cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=4107d1db-62a3-427c-8515-c954a103ce25 ro text quiet changed the command line in a blind attempt to: $ cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=4107d1db-62a3-427c-8515-c954a103ce25 ro nouveau.config=NvForcePost=1

On 7/4/23 10:01PM, Jim Klimov wrote: > Normally yes - enable and start the target and the particular services relevant to your setup. > > For the binary you have from packaging (if not rebuilt as suggested earlier), set debug_min=3 in ups.conf section for > upscode2, to currently trade driver viability for some storage traffic with more logs :\ > > Sorry about?that, > Jim

I'm not really looking for working configurations as much as I am looking for people who can say "This is a solid product and I trust my business to a solution running Asterisk." As far as pre-sales work... Well, tell that to my consultant. I'm quite excited about *. I've got my company sold on it, they just want some reassurance that it's ready for prime-time

According to http://us3.samba.org/samba/docs/man/Samba-HOWTO-Collection/NetCommand.html#id2571949there should a be ":" between a users UNIX login and their Windows login in the "username map" file, is that correct? According to the man page there should be an "=" between them. The reason I ask is because I am trying to get username maps to work in Samba

On 7/5/23 03:17AM, Jim Klimov wrote: > Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), > did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build > your own in one of many ways possible :\ I think I'm not following you - with debug 3 -->> it

Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build your own in one of many ways possible :\ On Wed, Jul 5, 2023, 06:23 Karl Schmidt <karl at lrak.net> wrote: > On 7/4/23 10:01PM, Jim Klimov wrote: >

Hi there, Does anyone know how to predict ARMA? It doesn?t have either predict or forecast methods. I found couple of packages called fbasic and fseries at http://www.itp.phys.ethz.ch/econophysics/R/, which has ?arma.predict? in it, but it doesn?t seem to be working. Any help in this regard would be appreciated. Thanks in advance. Regards Skanda Kallur "Prediction is very difficult,

Hi R users, I am new to using DBMS with R for large datasets. Thanks to all who responded with useful suggestion to my earlier postings about using large datasets and DBMS with R. I am writing to get some help about how to design good tables in DBMS to take full advantage of the wonderful built-in facilities in R, like labels. I am using RMySQL client. Because R makes good use of variable