similar to: Bug [1.1rc5]: Crash during "CPU architecture changed" index upgrade

I''m using Debian (sarge) I do now have 2 ISP, one DSL and one cabel. I want to use the DSL as my primary and only use the cabel-modem if the DSL fails. The setup is: IP1 -> Router -> NAT_IP1 -> eth0 -> eth2 (LAN) IP2 -> Cable-Modem -> eth1 -> eth2 (LAN) I wrote the following in my /etc/iproute2/rt_tables ip rule add from NAT_IP1 lookup 1 ip route add

Hi guys I installed ocfs2 on 4 node (redhat 4u3) on shared FC devices ( EMC storage ). So I've noticed several problems: 1. When I restart first node, it shutdown so slow and I have to power off machine. What is the problem, heartbeat timeout, dlm ? 2. What will happen when I plug off network cabel ( for interconnect ). What shoud I do, unmount ocfs2 volume on each node, stop ocfs2

Hello Peter, The attached patch contains three small (although 2 of them are fundamental :) fixes for pxelinux 1. Alignment error when more than one initramfs are loaded using initrd - the alignment of the last disk is discarded in calculations but is ALWAYS present when the loading procedure is called. As a result - the second image (cpio) is not recognized. 2. On some platforms

Please forgive is this has been posted, but without a good search function the archives are hard to search. Have a home network - two laptops XP PRO, one Linux RH 7.3 and one NT box. All in the workgroup named workgroup. I would like to rid myself of the NT box as all it does is spool a printer and a USB Hard drive for backup purposes. Network hooked to a Linksys Cabel Modem router, So NAT

Hi, I must say that i admire very much the printing documentation written by one of your samba team. I wish every documentations is like this! -- It explains to a newbie like me what I need to know. It is amazing: i read it and in my head a few questions start to go round. I read 1 page more and the questions are answered. It is not good that the other documentation pages of the howto

Skipped content of type multipart/signed-------------- next part -------------- -- To unsubscribe or change options: http://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.tuxedo.org/~esr/faqs/smart-questions.html

Model: Tripp-lite OMNIVS1500 Error: Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: unknown/unknown libusb_set_report() returned -1 instead of 8 Could not reset watchdog. Please send model information to nut-upsdev mailing

Hi Stef, Reffering to page < http://www.docum.org/stef.coene/qos/faq/cache/7.html > I found a para as follows, " CBQ is not always as accurate as it should be. See docum.org on the test page for some tests with bounded classes. The algorithm used by cbq is very "link sensitive". It calculates the link idle time and for that it needs the real link bandwidth, average

Hi All, I am working with a local middle school to replace Windows PCs with Linux PCs. I am new to this list but have been trying to use WINE for a while. We have a major problem that we can't seem to figure out. We are trying to use WINE with a software called Data Studio from Pasco Scientific ref: http://www.pasco.com/datastudio/home.html . Pasco makes a scientific data probe, the Pasport

Hi! I have some problem with samba. The problem concerns the smbfs kernel module and smbmount. Smbfs makes other processes "hang". The only thing to do is to reboot the computer, not even "Kill -9" works. I use a Linux system with the Redhat 7.2 distribution. It runs on a AMD 500 K6-2 processor with a memory of 192MB. The kernel is an unmodified 2.4.9-31 from Redhat. I have

I have a simple perl script that every few hours pings the handful of machines on my LAN. Lately I've sometimes been getting ping of 192.168.0.1 succeeded ping of 192.168.0.7 succeeded ping of 192.168.0.5 FAILED ping of 192.168.0.6 succeeded ping of 192.168.0.9 succeeded This machine in question has been running Centos faithfully for about six years and no recent changes to it have been

hi, i'm trying to get the application MICROWIN STEP 7 (version 3.1 SP2) from siemens to run. it's a tool which can program siemens simatic S7 through different devices, among others via serial port ppi cabel. the problem is this: the application installs fine, but when i try to install a software device interface (the interface to the serial port, for example), nothing happens. the

HI Guys, I am trying to install ferret as a gem ''sudo gem install ferret'' and it is failing to make the native libraries, I am using the 64 bit version of Ubuntu 7.10 Here is the first the first 30 lines or so, any hints, I know it is probably some sort of 32 bit v 64 bit problem?? ---------------------- Building native extensions. This could take a while... ERROR: While

Hi folks, I have British comedienne, Alison Keenan (another Alison!) coming in on Saturday afternoon to record the Asterisk prompts for me. Alison speaks with a "posh boarding school" accent. Finally we'll have a free British English female voice bank. As I have her in my studio (yeah right; it's a cupboard under the stairs) does anyone need anything doing? She's charging a

Hello, I'm check Your version of patch in syslinux-3.52-pre3. Memory (for multidisk) and 'empty line' work correctly, but VMware check (if enabled :) - not. Nasm use 'reverse' byte order in 'xxx'-constant :). With attached patch all work correctly (checked in VMware v6). Best regards, Iouri mailto:bc-info at styx.cabel.net --------------

On Apr 27, 2015, at 9:07 AM, Joerg Schilling <Joerg.Schilling at fokus.fraunhofer.de> wrote: > > Heirloom added support for uname -S and for some linux ulimit extensions but > then stopped working on the code after a few months Ah. I had no idea it was in a state of disrepair. >> I see that you already wrote up the differences between osh and bosh in an earlier post. Is

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

On Tue, 31 Jul 2018 12:34:28 -0700 Gregory Sloop via samba <samba at lists.samba.org> wrote: > > >> A substantial reason I'm not using debian/devuan is LTS support. > > RPvs> Debian has its own version of LTS: https://wiki.debian.org/LTS > > Yeah, I've seen that. Not a lot of faith in it though. It sounds a > lot like "trust me, someone's

I have found very little information about this problem on the net, so i thought someone here might be able to help me. I am running mac os x 10.4 on a powerbook and have installed ruby 1.8.6 and was trying to get ferret to work, without any success. Here is exactly what i did and what happened: $ sudo gem install ferret Updating metadata for 125 gems from http://gems.rubyforge.org

Suddenly, today, my wife's Windows 95 machine can't print to the network printer on my Linux machine. It complains that "there was an error printing to \\posh\lp ... There was a problem printing to the port." The error 1st occurred (coincidentally?) after I had upgraded the kernel from 2.4.18 to 2.4.19. But rebooting to 2.4.18 has made no difference. We're running smbd