similar to: SoundBlaster 16 removal impending

Hi there! My problem is the following: I am experimenting with virtualization with XEN. I am running WinXP in a HVM host with a Debian Gnu/Linux (Etch) dom0. I am also using audio emulation (sb16). This way, sounds from WinXP work fine. And here comes the problem: The HVM guest completely reserves the audio device; other software can not use it. (mplayer says this: alsa-init: using ALSA

Hi! Please help me. # xm create win7.hvm Using config file "./win7.hvm". Error: Device 768 (vbd) could not be connected. Path closed or removed during hotplug add: backend/vbd/9/768 state: 1 grep -v ^# /etc/xen/win7.hvm | grep -vx '''' kernel = "/usr/lib/xen/boot/hvmloader" builder=''hvm'' memory = 2048 name = "win7" vif = [

Unable to connect to my HVM # xm list Name ID Mem VCPUs State Time(s) Domain-0 0 3869 2 r----- 368.6 vm00 45 128 1 -b---- 62.3 The vm00 changes state from "r" to "b" after about a minute. (I have a fedora dvd in the drive.) #cat

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I''ve been using xen for a number of years now without issues, but now have a problem. First, the problem: I have a Windows Server 2008 Standard 64bit DomU, I''ve installed a number of applications, and it works quite well and runs stable for weeks at a time so far (ie, has never crashed yet). I tried to install QuickBooks

Hi all, i have just finished my installation of wine as normal user (see below). Notepad is running fine, so i decided to run something more fun, starcraft. The installation program works, even with sound and all, exept when i decide to run the previews. The previews run rine, but whithout sound. When i return to the installation program the sound is gone. But anyway, it does it's yob,

60-cycle hum ?? yep, probably a ground loop. http://www.xiph.org/archives/icecast/2703.html -----Original Message----- From: Scott Prive [mailto:Scott.Prive@storigen.com] Sent: Monday, May 20, 2002 10:04 AM To: icecast@xiph.org Cc: bikepunx@impop.bellatlantic.net Subject: RE: [icecast] soundblaster live noise <p>I don't know the answer, but here are suggestions to the limit of my

Hi, I have the VIA chipset, and I'm trying to disable the sound and enable a soundblaster compatible card. Can you tell me what you did in /etc/modules.conf to enable your soundblaster card? Thanks, Mike

Folks, I last saw this problem in a thread in this newsgroup a couple of years ago, but there was no solution then. It was then stated that you couldn't get a SoundBlaster Live sound card to work under Wine because Windows 'ran' everything through the emu10k1.vxd file and Wine did not support vxd files. Is this still the case? Has anyone found a workaround yet? Pete

I have a Creative Audigy SE configured whit the module CA106 The problem is to make the mixer work. It seems that Wine looks for PCM Playback Volume that is common to many cards, but not mine. My card channels for Playback are IEC958, IEC958 C, IEC958 F, IEC958 R, Analog C, Analog F, Analog R and Analog S. What am I missing? Thanks.

Hi, This patch makes it possible for Qemu to use the SDL library, to conveniently replace VNC, which has horrible mouse support. It also adds a IOEMU_CONFIGURE_OPTIONS option in tools/Makefile, so that later on, we can call: $(MAKE_CLEAN) -C $(DIR)/tools $(CONFIG) IOEMU_CONFIGURE_OPTIONS="--audio-drv-list=\"pa oss alsa sdl esd\" --audio-card-list=\"ac97 es1370 sb16 cs4231a

Hi there, I'm trying to repurpose an unused machine (athlon XP 3000+) for my young daughter to use. It's on a motherboard with a VIA KT880 chipset and VIA integrated soundcard (VIA 8237). The card seems to be detected during boot time and shows up in the system log, but when I try to actually use the sound card within Gnome, there's no sound. The device is detected, but

Hello. Im trying to get hvm running on my amd64 am2 socket 2gb ram. 1st it as a Debian amd64 etch. 2st xen 3.0.3-2 debian build (more configs below) 3st acpi=1 apic=1 Problem is I can install winXP but after reboot i get black screen. If i press F8 i get menu of XP but can''t select anything ->frozen again If i try acpi=0 apic=0 and install XP it freezes before it XP boots

--- Hal Vaughan <hal@thresholddigital.com> wrote: > I've been reading the info on Sourceforge about Flac, but there's one > thing > I'm not clear about (and it looks like Flac may not support this > yet). > Before I installed it, I wanted to know if Flac would do what I need. > > I want to be able to record shows on the radio (I have a radio hooked >

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I can't seem to be able to get any sound out of my CentOS 3.8 laptop. I have the ESS ES1878 chip in it. It can work in either native mode, or in SoundBlaster compatible mode. Neither is detected by CentOS 3.8. I've looked at the directory with kernel drivers, and there doesn't seem to be any kernel module that smells like either

I have been trying to get lowest-latency sound (with highest fidelity) to use with Dragon NaturallySpeaking. I have Jaunty and the latest RT kernel, which I know has problems for many applications but works fine to run DNS. (It will not, however, install the program nor train it.) I set up real-time audio access as follows: sudo su -c 'echo @audio - rtprio 99 >>

Some of you might already know that we are releasing a new phone, snom 360. To make the phone well-known and stable, we have made a soft phone version out of it and offer it for trial or private use for free (for more details, see the license conditions). There are only few limitations to the phone. First of all, the audio subsystem will work only work with an acceptable quality if you are using

here at wkdu.org our minds are blown trying to figure out what our problem is, we are using a dell optiplex gx1 with a soundblaster live card. we are getting a nasty hum on the line in. the thing is we plug a cd player directly into the soundcard the hum goes away and when we plug the line in into anything else there is no hum, so the question i ask where is the hum coming from? we are

I am working on S5000VSA Intel Server Board with the following cpu spec. XEN-PEER-RHEL5 $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU E5345 @ 2.33GHz stepping : 7 cpu MHz : 2327.512 cache size : 4096 KB physical id : 0 siblings : 1 core id : 0

Hi There, I have just ported to Linux a program that I wrote years ago in Prolog under DOS to automate our Shortwave radio station. Back in 1990 the original program used ADPCM coded audio files and a special board. Now I can use MP3 files and a Soundblaster compatible card ;-) under Linux, and it runs from a console without any fancy interface. I absolutely need to fade-in and fade-out

Hi, today I wanted to start Monkey Island 4 with wine. I'am using cvs version of wine from today (04.Feb.2001), I also patched the transgaming directx patch into it. My system: SuSE 7.0 with KDE2.1beta2, GeForce 2MX with 0.96 NVidia drivers, Soundblaster PCI 128 (ES1371) with Kernel drivers. I use wine with installed Windows. My startup command is: wine "c:\Monkey4\Monkey.exe"