similar to: HOWTO: Asus EEE Box Network card

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people

Hello I've just been hit by one of the chipsets described at http://wiki.centos.org/HardwareList/RealTekRTL8111b. Because a) it does not work with the stock driver included in Centos 5.1 and b) I am very lazy and I do not like manually compiling modules each time a new kernel is installed (not to mention that I never forget anything, except for the important things which always go

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : ???????

Hi, I have a new mainboard with a Realtek RTL8111B / RTL8168B NIC. In 5.1 are no driver integrated for this nic, but there is driver disk: http://wiki.centos.org/HardwareList/RealTekRTL8111b and http://wiki.centos.org/HardwareList/RealTekRTL8111b?action=AttachFile&do=get&target=r8168-2.6.18-53.el5-i686-x86_64.img.zip Can I integrate this driver do the CentOS 5.1 ISO or can i use this

Hi, I have a really strange problem with a driver disk (http://wiki.centos.org/HardwareList/RealTekRTL8111b) on amd64. I'm remotly booting the system via isolinux-files, so I unfortunatly do not have access to relevant logs, all I can see the the primary console/screen. With i386, the driver disk works just fine and I can install via http. But with amd64, the installer complains no driver

I'd like to add a page for the Realtek RTL8111b NIC. I'm not sure how you'd like to organize it since the page really could be relevant to both CentOS 4 and CentOS 5. I think a single page like: http://wiki.centos.org/HardwareList/RealTekRTL8111b Would work with links to both CentOS 4 *and* CentOS 5? However, if the wiki admins want two pages, that'll be fine too. Can you also

Hiya! I need help over here.. I have a Asus pc eee 900, ubuntu eee with wine.. but now i got some problems. I have installed wine and then spotify, a game called tibia and winamp and tibia dident work so i uninstalled it but the icon's (tibia, readme and uninstall.exe) is still in the wine map.. So i uninstalled wine and deleted the .wine hidden map in home and the icons are still there

I am trying to transport a dd image between to hosts over a cross linked gigabit connection. Both hosts have an eth1 configured to a non routable ip addr on a shared network. No other devices exist on this link. When transferring via sftp I received a stall warning. Checking the logs I see this: dmesg | grep eth e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:f2:1f:bb

Hello guys i'm a new asus eee user,you know the small umpc running the Xadnros OS,and since its not alla that bad i'm thinking of sticking to it instead of installing windwos XP.I do need though to run some windows apps,so i heard that wine should be my weapon of choice for this purpose! So anyway i'm not familiar with linux-like setup procedures so i followed a guide on the net for

Hi. I?m totally new to all that is Linux and so on. But I really wan?t to learn more about this wonderful os. I?m using an Asus eee pc 900 and it came preinstalled with Xandros. Now I get a little confused on which version of wine (if any) will work on it. I tried to search the site/forum and web but I haven?t found any good answer. One more question. If wine does not support Xandros, can I then

will that how to wine on eee wiki work for the 1000 too

Hello, I own one of these netbooks Asus Eee PC 900, mine is running FreeBSD 7.0, and a Linux based cellphone, the OpenMoko Freerunner. Since some time I'm thinking in a replacement of my 'normal' BRI phone at home and the two items mentioned above let me think that the replacement should be UNIX based as well. The legacy BRI phone, around ten years old, even has more or less the same

Dear All, A while back, the question was raised whether R would run on an Eee PC: http://tolstoy.newcastle.edu.au/R/e3/help/07/12/6564.html There were some positive responses and some suggestions for getting this to work: http://tolstoy.newcastle.edu.au/R/e3/help/07/12/7244.html For those who would like a step-by-step guide, here it is. I hope somebody might find this useful. 1) open up a

Hello. I just fresh-installed 5.3 onto my laptop, and I have a problem trying to get wifi working. Be aware that I have 5.2 on it, and did the same process, and it worked great! I'm using http://wiki.centos.org/HowTos/Laptops/WirelessAR5007EG -- as I did for 5.2. The problem arises in section 6: [mpk at a3680 madwifi-hal-0.10.5.6-r3968-20090402]$ make /bin/sh: line 0: cd:

On 16/02/2019 02:43, Saurabh Nanda via samba wrote: >>> 2) Is this normal -- fs/cifs/smb2misc.c: Calculated size 157 length 156 >>> mismatch mid 11907 >> Could be a bug or miscalculated length + non critical warning, I also >> see this on master kernel. Either way I doubt it's slowing everything down. >> > Should I file a bug for this? > > >>

I am experiencing poor network performance on Dom0. When i ping other hosts on the same LAN, packets are out of order, and they show response times ranging from < 1 ms to several seconds, and some packets get lost. For example, a typical ping result looks like this: 87 packets transmitted, 80 received, +3 errors, 8% packet loss, time 86038ms rtt min/avg/max/mdev =

Hi all, Having seen a few messages regarding the ASUS Eee PC (p701) and R, and then buying one and trying to get R installed on it, I thought there might be a few people on the list who would appreciate a cookbook on how to do it. It's a nice little piece of machinery, running Xandros 4 Linux (seems to be compatible with Debian Etch) and set up for the person who wants to do all those

Dear all, I just went through the process of installing R on an eeePC 900 running Linux. As a Windows useR utterly ignorant about Linux, I'd never have done it without reading your posts and the R Wiki, so first of all: thank you! Next, taking up your thread from some weeks ago, I thought this could be useful for somebody else too, so here's what I did: 1) I followed wolfgang's

Hi, Running Transaction ? Updating?????? : selinux-policy?????????????????????????????????????????? 1/6 ? Updating?????? : kmod-r8168?????????????????????????????????????????????? 2/6 Working. This may take some time ... An hour later, still working... S+?? 10:51?? 0:08? |?????????? \_ /usr/bin/python /usr/bin/yum update S+?? 10:53?? 0:00? |?????????????? \_ /bin/sh /var/tmp/rpm-tmp.9003 2

I would like to contribute my article: http://lxer.com/module/newswire/view/81238/index.html to Wiki. Username: BorisDerzhavets ____________________________________________________________________________________ Expecting? Get great news right away with email Auto-Check. Try the Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html