similar to: Orinoco 802.11b PC Card doesn't work on STABLE

Hello, I am attempting to get by broadcom wifi card up and running, am sick of trying to get ndis working, and am attempting to use the bwi driver (originating in dragonflyBSD). I'm hoping others here have tried to do the same and have some pointers. I'm using 7.1-RELEASE (system/source are in-sync) and my card is a BCM94306MP. My dmesg is posted below. Bwi(4) is installed and it

Hi, I've installed 7.2-PRERELEASE, csup on 20090423 at around 19:00 UTC. When I rebooted after installing world, X started (xdm in /etc/ttys) and immediately panicked the system, even before switching to the new VTY. I removed all ports and installed Xorg from today's ports HEAD, same result. This is the case with my old xorg.conf and a new one from 'Xorg -configure'. I

Hi, I am trying to get FreeBSD 4.7 to connect to a Maxtor 5000XT drive, but I get the following when connecting it -> Apr 26 09:19:43 chowder /kernel: fwohci0: node_id = 0xc000ffc1, CYCLEMASTER mode Apr 26 09:19:43 chowder /kernel: firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) Apr 26 09:19:50 chowder /kernel: fwohci0: BUS reset Apr 26 09:19:50 chowder /kernel: fwohci0: node_id =

Hi! Just before we start, this is not the "USB hang on boot" problem. OK? This post got rather long, so I'll summaries it all in a sentence here: With FreeBSD 4.9-rc on an ASUS A7N8X with a cheapo memory stick, simply plugging it in and taking it out a couple of times is a guaranteed panic. I use only one USB device, a cheapo USB memory stick, which I recently bought on a

Hi, I am running FreeBSD 5.0-RELEASE-p7 and cannot build any Mozilla version from ports. The build exits for all versions at the same point. A source file called jsdtoa.c. Thanks.. Here is my error report: ******************************************************************************* cc -o jsdtoa.o -c -DOSTYPE=\"FreeBSD5\" -DOSARCH=\"FreeBSD\" -DEXPORT_JS_API

server:~# dmesg|grep pciback [ 0.000000] Kernel command line: root=/dev/hda1 ro console=tty0 pciback.permissive pciback.hide=(00:1d.00)(00:1d.01)(00:1d.07) [ 0.000000] Unknown boot option `pciback.permissive'': ignoring [ 1.210945] pciback 0000:00:1d.0: seizing device [ 1.211082] pciback 0000:00:1d.1: seizing device [ 1.211215] pciback 0000:00:1d.7: seizing device [

Hi everyone, I would realy appreciate your help and guidense with a problem I have. Im trying to set up a SMS Gateway as a alert system for my network. Although the Aircard is picked up as a usb device and has a driver in the kernel, it does not have a /dev/XXX device name. So my question is how do I create this /dev/XXX device and make it persistent. I have installed CentOS as my base with

http://bugs.freedesktop.org/show_bug.cgi?id=21023 Summary: NV34GL: fails to properly set up DVI Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy:

I have installed 5.2 on my work desktop and everything works perfectly EXCEPT the sound device. Here is the relevant lspci line: 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) I tried looking in Google (might have been a bad search), but all I could find was to add acpi=on to my boot line in grub.conf, and that

I have been having a problem with dsound. It will not recognize my sound card in Jedi Knight II: Jedi Outcast. I have been looking at the config file in the dsound area but I am unsure of what to change or even how to change it. This is the error message trace:loaddll:load_builtin_dll Loaded module L"c:\\windows\\system\\dsound.dll" : builtin err:wave:DSDB_MapBuffer Could not map

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Hi, I currently encounter spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long panic: spin lock held too long cpuid=3 on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM. System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC. This happens with VSCom Card that was previously in use in a 5.3-STABLE system (also hp server, but older hardware) without problems. The

Hello, I have a server pfsense in bridge mode to function as transparent FW, the problem is that once I connect the pfsense between my router core and my core switch catalyst a few seconds begin to appear several messages like these: em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting And the connection falls

Oh, wise Centaurs, On the last install (Suse) I was running on this old notebook (Dell i600m) the audio worked fine. Specifically, Realplayer and onsite players (like you get at NPR and other sites) and youtube played just fine. But with this current install (CentOS 5.3, fully updated) all of those sources just mentioned play choppy. It's like an echo so severe that it's impossible to

I'm running FreeBSD 7.1-PRERELEASE over Asus P5Q motherboard. Such board comes with an nic requiring age0 driver. When the nic is under load, such trasferring big amount of data over gigabit connection (let's say some gigabyte backups), the computer hangs, sometimes with panic, sometimes freezing. Before that i was using an Intel nic with em0 driver and 7.0-Stable#2.. and that

I have a current RELENG_7 running on: http://www.supermicro.com/products/system/4U/7045/SYS-7045B-TR+.cfm with the -3+ IPMI card. I can interact with the BIOS, etc, but no joy once we get past the loader. Anyone have ideas? Attached is the kernel config, and the /var/run/dmesg.boot file. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 512-248-2683

I've been struggling desperately to get iGuidance 4 working with Wine and I've come across what seems like an incredibly specific problem. I've been struggling with the TTS output for the navigation, it just keeps randomly locking up the app, sometimes after a mile, sometimes 30, after figuring out I could debug just the wave classes, I think I've found a clue. It keeps hanging

Originally, the test is on a tiger with RHEL installed. The fs is ext3 as default. Then the oops came up. I've installed the test kernel on another tiger with Suse, reiserfs as default. The kernel can boot successfully without any trouble. Is it a known issue? Or what causes this happen? thanks, -zhen -----Original Message----- From: Wang, Zhenyu Z Sent: 2004?7?20? 16:59 To: linux-ia64 at

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result