similar to: swap_pager: indefinite wait

My server just literally was brought to it's knees with this message spewing on the console: swap_pager: indefinite wait buffer: bufobj: 0, blkno: 1203133, size: 4096 (blkno and size were varying) Some searching says that this is or was a bug. Has this been fixed yet? If so, what should I upgrade to? I'm currently running 6.3 Michael Grant

Aug 11 03:56:34 danux /kernel: swap_pager: out of swap space Aug 11 04:02:34 danux /kernel: swap_pager_getswapspace: failed Aug 11 04:02:34 danux /kernel: pid 278 (XFree86), uid 0, was killed: out of swap space i was actually looking at the screen and then everything stopped (mouse etc). i could not switch to console, but a ctrl+alt+del rebooted fine. one thing that could be taking a lot of

Hi, After some more testing I thought it would be good to put this into production for my personal server. I''ve used pvhvm_v19 and built it without debugging options and installed it on a FreeBSD 9.1 system. I''ve run into some hiccups with 9.1 user land and a 10-CURRENT kernel, but that''s all solvable[0]. My VPS has some very limited memory (256M), but I''ve

Hello freebsd-stable, I have 5.5-PRERELEASE server in production, booting from ad0s1: # BLOCKSIZE=512 swapinfo Device 512-blocks Used Avail Capacity /dev/ad0s1b 2097152 52872 2044280 3% /dev/ad1s1b 2097152 51952 2045200 2% Total 4194304 104824 4089480 2% # bsdlabel ad0s1 | fgrep b: b: 2097152 0 swap

On 04/20/2017 05:16 PM, Warren Young wrote: > On Apr 20, 2017, at 3:00 PM, Robert Moskowitz <rgm at htt-consult.com> wrote: >> So I have learned that Postfix should delay until Chronyd has moved the system time from 0 to current. > I think it?s more the case that CentOS is written with the assumption that you?re running it on a host with a battery-backed RTC, so that system time

hello all! i've installed gcc-3.2 about a month ago and put "USE_GCC=3.2" into /etc/make.conf. now "make clean" for any of ports leads to smth like Apr 18 12:38:54 alc /kernel: swap_pager: out of swap space Apr 18 12:38:54 alc /kernel: swap_pager_getswapspace: failed Apr 18 12:38:54 alc /kernel: pid 219 (XFree86), uid 0, was killed: out of swap space "ps ax"

Hello, I'm running FreeBSD 9.0/amd64, pure ZFS setup, one Seagate disk ST2000NM0011 SN02 on LSI Logic (mpt) controller. Yes, I know that running one disk on RAID controller is a bit weird, I have to find yet if it is possible to connect disk to internal SATA controller. About two days ago, system became SLOW. Disk usage is constantly 100%, and sometimes I'm getting swap_pager:

On trying a yum update I get the following error: Error: kernel conflicts with bfa-firmware yum suggests I work around the problem with --skip-broken or try running 'rpm -Va --nofiles --nodigest' Is there an accepted process for resolving this? -- Regards, Giles Coochey, CCNP, CCNA, CCNAS NetSecSpec Ltd +44 (0) 7983 877438 http://www.coochey.net http://www.netsecspec.co.uk giles at

This change allows use of untrusted X11 forwarding (which is more secure) without requiring users to choose a finite timeout after which to refuse new connections. This matches the semantics of the X11 security extension itself, which also treat a validity timeout of 0 on an authentication cookie as indefinite. Signed-off-by: Trixie Able <table at inventati.org> --- clientloop.c | 12

Everyone, I'm very new to R, especially when it comes to loops and functions, so please bear with me if this is an elementary question. I cannot seem to figure out how to construct a loop which runs a function until a certain value is computed. For example, say I have the following: num = numeric (10) num [1] = 0 for (i in 2:10) { num [i] = num [i-1] + 5 } This adds 5 to the

We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP Vortex GDT8546RZ 4 port SATA RAID card in a Tyan S2460 system with dual AMD Athlon MP 1600+ CPUs. We do not have any problems with this configuration under FreeBSD 4.11, and we have the same ICP cards in Tyan based Opterion system (S2882 and S4882) run with out problems under FreeBSD 5.4 and 6.1. We can reproduce the problem on

We''re setting up ZFS in front of an MD3000i (and attached MD1000 expansion trays). The rule of thumb is to let ZFS manage all of the disks, so we wanted to expose each MD3000i spindle via a JBOD mode of some sort. Unfortunately, it doesn''t look like the MD3000i this (though this[1] post seems to reference an Enhanced JBOD mode....), so we decided to create a whole bunch of

Hi, I''ve looked at ZFS for a while now and i''m wondering if it''s possible on a server create a ZFS mirror between two different iSCSI targets (two MD3000i located in two different server rooms). Or is it any setup that you guys recommend for maximal data protection. Thanks, /Thom This message posted from opensolaris.org

Hi all, I''ve a little server, an old PIII 677 with Fedora Core 4, default kernel, and Shorewall 3.0.1. This pc is working fine, but I need to use a 2nd ISP connection; everything is working from configuration point of view, but the server, after a while (usually few hours), just hangs. Removing the 2-ISP configuration part, the problem is solved, so I''m quite sure that hangs are

Hi, I''ve looked at ZFS for a while now and i''m wondering if it''s possible on a server create a ZFS mirror between two different iSCSI targets (two MD3000i located in two different server rooms). Or is it any setup that you guys recommend for maximal data protection. Thanks, /Thom -- This messages posted from opensolaris.org

I have a new Dell PowerEdge 2950 running CentOS 5.0 out-of-box and a Dell MD3000i. I am new to iscsi and, with google and included documentation, am having a heck of a time trying to get the RAID volumes I have created on the 3000i to be seen by the OS as usuable drives. I have printed out SMcli and iscsiadm documentation. I have asked on the linux-poweredge at dell.com site, too. Many

We currently have a MD3000i with an iSCSI LUN shared out to our apache web server. We are going to add another apache web server into the mix using LVS to load balance, however, I am curious how well iSCSI handles file locking and data integrity. I have the iSCSI partition formatted as ext3. Is my setup totally flawed and will ext3 not allow for data integrity with multiple apache hosts

Hi Jeff, I have a single-CPU system with P4 HTT-enabled processor (7.1-RELEASE-p3), kernel compiled with SCHED_ULE. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p3 #0:

Hello! I was trying to build OpenOffice using all of my 4 CPUs. To be able to do other work on the machine comfortably, I ran the build under nice, and assigned real-time priority to the two Xorg processes. The build started at about 23:10 last night, and hung at 23:46. The procstat output for the make's process group is: PID PPID PGID SID TSID THR LOGIN WCHAN EMUL

Hello, I have a DELL MD3000i, and a couple of servers that I want to connect to the array. I have setup the main server with CentOS 5. - 2.6.18-53.el5 x86_64 - ocfs2-tools-1.2.7-1.el5 - ocfs2console-1.2.7-1.el5 - ocfs2-2.6.18-53.el5-1.2.8-2.el5 # Kernel Module And two OpenSuSe 10.3 Servers - 2.6.22.5-31-default x86_64 - ocfs2-tools-1.2.6-18 - ocfs2console-1.2.6-18 The module has been already