similar to: Getting two notifications of nocomm-timer expired when USB cable is pulled from the UPS

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

Now that upsstats.cgi works, I've noticed that dummy-ups changes state every 5 minutes between OL and OB (probably when the 300 second timer expires). The UPS state stays online. Also "online" and "onbatt" are broadcast to the console probably via WALL. (The state changes don't seem to be form the ups as upsshed-cmd doesn't run). Upssched-cmd does run when the UPS

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Hi list, I use ssh a lot and I often need to connect to hosts whose host key has changed. If a host key of the remote host changes ssh terminates and the user has to manually delete the offending host key from known_hosts. I had to do this so many times that I no longer like the idea ;-) I would really like ssh to ask me if the new host key is OK and if I want to add it to known_hosts. I talked

The attached patch implements a feature that would make my interaction with ssh somewhat more secure. When connecting to a host whose key is not in the known_hosts file, this patch makes ssh tell the user about any other hosts in the known_hosts file that have the same key. For example, if I have host A in my known_hosts file, and try to connect to host B which is an alias for A, ssh will tell

On 19.02.24 14:48, Dan Grostick via Nut-upsuser wrote: >Msmtp is not sending messages when invoked from upssched-cmd. >I can manually invoke it from the command line. where is its config file? >There is a 's' instead of an 'x' in the ls -l. Might this be some sort of >permission problem? Should not be the case. >upsmon.conf has run user as root. msmtp may use

Msmtp is not sending messages when invoked from upssched-cmd. I can manually invoke it from the command line. There is a 's' instead of an 'x' in the ls -l. Might this be some sort of permission problem? upsmon.conf has run user as root. Dan -------------- next part -------------- An HTML attachment was scrubbed... URL:

Don't be afraid about the info that I'm going to post in this mail, but I want you to give as much info as possible. Also I want to show you what I've tried. What do I want When a voicemail-message is left via the Voicemail()-application, I want the .wav-file send to my mail-address as an attachment. My mail-setup I'm not using sendmail as MTA. I have msmtp as MTA and mutt as

Hi, I found a small issue with DNSSEC validation of SSHFP lookups. (For reference I used OpenSSH 6.8p1 on FreeBSD 10.1). The issues is that when DNSSEC valiation fails, ssh displays a confusing message to the user. When DNSSEC validation of a SSHFP record fails, ssh presents the user with "Matching host key fingerprint found in DNS. "Are you sure you want to continue connecting

When connecting to a host for which there's no known hostkey, check if the relevant key has been accepted for other hostnames. This is useful when connecting to a host with a dymamic IP address or multiple names. --- auth.c | 4 ++-- hostfile.c | 42 ++++++++++++++++++++++++++++-------------- hostfile.h | 8 ++++++-- sshconnect.c | 39 +++++++++++++++++++++++++++++++++------

I am having an issue running NUT and using an TrippLite OMNI900LCD. When I run ./upsdrvctl start I get : [player@V0002-S002 bin]$./upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0) Detected a UPS: Tripp Lite /TRIPP LITE UPS Using subdriver: TrippLite HID 0.1 (experimental) dstate_setflags: base variable

I'm trying to get a script working on a website to send out automatic email reminders to customers reminding them monthly to change furnace filters. I haven't got one running successfully, yet. That made me think - could it be done with a phone call using Asterisk? A monthly automated phone call to remind people to change their furnace filter? I have no ability to figure this out

Right, now I got then > service lmtp { > ? unix_listener lmtp { > ??? #mode = 0666 > ? } > > ? inet_listener lmtp { > ???? address = 172.24.109.6 > ??? port = 24 > ? } > } and [ msmtp ] is connecting indeed. Does TLS/STARTTLS need to be added to [ inet_listener lmtp ] in order to facilitate [ lmptps ]? If so what is the syntax? Right now this error comes up: >

You have lmtp as unix socket configured but want to access from remote via tcp socket? I think you need inet_listener instead of unix_ listener ----- Originale Nachricht ----- Von: "?????" <vtol at gmx.net> Gesendet: 06.08.18 - 20:14 An: dovecot <dovecot at dovecot.org> Betreff: 2.3.2.1 - relay to lmtps from other lan host > Hi, > > looked into the [ dovecot wiki

Hi, looked into the [ dovecot wiki ] but a search for [ lmtps ] came up empty and thus hoping to get some assistance here. I am trying to relay with [ msmtp ] via [ lmtps ] from a lan host other than [ dovecot ] is running on. [ dovecot config ] > service lmtp { > ? unix_listener lmtp { > ??? #mode = 0666 > ? } [ ss -wxl | grep lmtp ] > u_strLISTEN 0????? 100???

On 10/06/2016 07:26 PM, Lane Russell wrote: > ?? > Syslog after server loses sight of UPS: > Oct 6 17:29:01 kvm usbhid-ups[3529]: libusb_get_string: error sending > control message: Broken pipe > Oct 6 17:30:53 kvm upsd[3533]: Data for UPS [ups] is stale - check driver > Oct 6 17:30:57 kvm upsmon[3548]: Poll UPS [ups at localhost] failed - > Data stale > Oct 6 17:30:57

Huh, must be an OpenDNS issue, it works from my phone. I wonder if I'm running into a similar defect on the PC UPS... I could try resetting the driver every few hours (this, in addition to replugging the cable fixes the issue temporarily), but that does feel like a hack that doesn't fix the root cause. I will try returning the unit and give APC a go. I've previously had good luck