similar to: Updated overview fig

Hi, Can you tell why my vnic built on top of an aggregation of 2 NICs of 1 Gbit/s doesn''t report a speed of 2 GBit/s ? [root at nazgul /]# dladm show-dev bge0 link: up speed: 1000Mb duplex: full bge1 link: down speed: 0Mb duplex: unknown bge2 link: down speed: 0Mb duplex: unknown bge3 link: down speed: 0Mb

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest

Howdy, I just finished reading through the Crossbow presentation: http://blogs.sun.com/sunay/resource/crossbow.pdf And have one question. If you create a virtual NIC with dladm: $ dladm create-vnic -d bge0 -m 0:1:2:3:4:5 -b 10000 1 Can you then add vnic1 directly to the zone? e.g.: zonecfg -z zone1 zonecfg:zone1> create zonecfg:zone1> set zonepath=/zones/zone1 zonecfg:zone1> add net

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

Hi, I''m afraid I have some problems understanding how crossbow is supposed to work ;) On my machine (OpenSolaris, snv_111) I''m running VirtualBox with couple of linux / XP installation and additionally a zone with exclusive IP. My network configuration looks like this: [6]elsinore:~>dladm show-link LINK CLASS MTU STATE OVER bge0 phys 1500 up

I have installed on a VirtualBox vm the crossbow ISO Now I''m trying to create the network map described in the "getting started" pdf I have this situation: On global zone, I have the real NIC: e1000g0 with ip 10.0.2.15 (VirtualBox NAT this IP, I can get web access with it) I have created an etherstub (etherstub n?2) with 2 vnics (vnic5 and vnic6), I''ve plumbed

Hi All, >From the design documents, I see there is an option "DLADM_VNIC_OPT_NODUPCHECK" for checking if the vnic MAC is unique on the same physical NIC. I have a question here. Does crossbow check if the MAC address is unique on the same subnet? E.g, create a vnic on hostA with hostB''s MAC address. Thanks, Karol

Howdy, I just installed the crossbow snapshot from opensolaris.org, and bumped into an issue when attempting to create a virtual nic: $ dladm create-vnic -i 192.168.1.101 -d ni0 2 dladm: VNIC creation failed: No such file or directory (unknown diagnostic) When I truss the process, it looks like it''s failing when attempting to open the vnic pseudo-device: 100878/1:

As requested by several people, an Overview document has been posted at http://blogs.sun.com/sunay The reference section also contains a pointer to the slides that will be used for tonights presentation. See you all there. Cheers, Sunay -------- Original Message -------- Subject: [osol-discuss] SVOSUG - This Thurs, August 24, Sunay Tripathi presents Crossbow 7:30pm SCA03 Date: Mon, 21 Aug

So, just to play with vnics with 106, I have... e1000g2 plumb''d with 192.168.85.10 vnic0 is created on top of e1000g2 with 192.168.85.22 I snoop on e1000g2 to see the traffic. I ping 192.168.85.22 and it works. I stop the snoop on e1000g2. I ping 192.168.85.22 and it doesn''t work. I start the snoop on e1000g2. I ping 192.168.85.22 and ping works. Is this a new feature with

Ok, I''m hoping this is a fairly trivial issue, and I''m missing something. I''m trying to use Solaris zones (Nevada Build 117) to act as a DMZ and a router, using exclusive IPs, VNICs (from Crossbow), and connecting to the internet (static IP from my ISP). I''ve got the DMZ working - that zone sees the internet, can do name lookups, ftp, telnet, ssh, etc etc etc.

I opened a bug report earlier today but it doesn''t seem to have been added to the bugs database. I''m posting here in case one of the Crossbow developers might see it and confirm this behavior. Description Duplicate packets are generated whenever an aggregate is introduced into the network configuration. We''ve ruled out switch ports and physical bge interfaces as

1 simple question about network statistics for vnics: We noticed that the statistics for vnics (used by Virtualbox guests) are not there. When the nics are plumped in the host OS, we do see them showing up, but all all records are 0. Can someone tell me how to get the correct network info via snmp on the Vbox Host?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING:

On 03/25/09 12:30, James Carlson wrote: > Girish Moodalbail writes: > >> bash-3.2# dladm show-link >> LINK CLASS MTU STATE PROMISC OVER >> e1000g0 phys 1501 up off -- >> e1000g1 phys 1502 up on -- >> > > That (plus or minus some column alignment) seems

Hi the Crossbow team, I am testing my UV fastpath bits and I found several issues that need your suggestion: 1. dladm show-usage won''t work if UV fastpath is enabled. Since the link usage data are collected based on the statistics of the mac_client_impl_t, and UV fastpath skips the GLDv3 processing, that won''t be available. I don''t see a solution for this except

Hi everyone, I''m Ezequiel from Buenos Aires. I''m new in this list, so please forgive me if my questions are not the correct one''s fro this alias. I''m working as a campus ambassador in Sun, while finishing my engineer degree, creating communities around opensolaris in Argentina. I discovered this project, and this group, looking for something that I could

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> <font size="-1"><font face="Bitstream Vera Sans"><br>     Hello,<br> <br>     I am trying to have dns <b>automatically</b> configured through

Folks, I just posted an updated Crossbow virtualization architecture document. The new revision is available at: http://opensolaris.org/os/project/crossbow/Docs/crossbow-virt.pdf The main changes are the addition of support for multiple MAC addresses per client, and an explicit separation between consolidation private and project private MAC API entry points. See in particular the

After googling around and reading the material on the opensolaris.org xvm community site, I still do not understanding the configuration of networking and would appreciate some assistance. Problem: I have successfully installed an hvm domU running Windows XP on opensolaris 2005.11 (build 94), and when the laptop (lenovo t61, core2 9300) is connected via the e1000g0 interface networking works