similar to: reboot sometimes freezes, adaptic scsi card possible problem

Hi. I've recently borrowed a SuperMicro 6013P-8 from a vendor for the purposes of testing it to see if FreeBSD and these machines will make a good replacements for our current flock of 11 Netra T1s running solaris. Things are going very well with the tests, with the glaring exception of the following crash: While doing some significant disk operations: du, deleting a different part of the

Can anyone help me here? ----- Forwarded message from Larry Rosenman <ler at lerctr.org> ----- Date: Sat, 9 Nov 2013 08:46:26 -0600 From: Larry Rosenman <ler at lerctr.org> To: freebsd-stable at freebsd.org Subject: 10-BETA3: Bad negotiation on AHD controller User-Agent: Mutt/1.5.22 (2013-10-16) Ever since I put 10 on this box (source upgrade from 8), I've been getting slow

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card

Update.? Only a single reboot has occurred since changing defalt_vsz_limit from 384M to 512M.? It would seem that something the users are doing is causing that virtual memory size to be exceeded (possibly a mailbox search?), and when that occurs Dovecot/FreeBSD is not handling the event as smoothly as expected. Here's my dmesg for more basic info. Sep 17 11:25:39 romulus syslogd: kernel boot

Hi there We have a pair of servers running FreeBSD 9.1-RC3 that act as transparent layer 7 loadbalancer (relayd) and pop/imap proxy (dovecot). Only one of them is active at a given time, it's a failover setup. From time to time the active one gets in a state in which the 'thread taskq' thread uses up 100% of one cpu on its own, like here: ---- PID USERNAME PRI NICE SIZE

Hello everybody, we recently got three Dell PowerEdge servers equipped with Qlogic QLE2462 cards (dual FC 4Gbps ports) and an EMC CLARiiON CX3-40 SAN. The servers with the FC cards were successfully and extensively tested with an older SUN StorEdge T3 SAN. However, when we connect them to the CX3-40, create and mount a new partition and then do something as simple as "tar -C /san -xf

Hi ... Can someone tell me whether or not this is indicative of a hardware, or software, problem? It happened a few times today, on two different drives, and it seem to "self-recover", since the server is still purring along without any noticeable problems: neptune# grep "timed out" /var/log/messages Jul 25 03:52:51 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x40 - timed out

I have a Supermicro SuperServer 6013P-8 system which features a X5DPR-8G2 motherboard with embedded Adaptec AIC-7902 dual-Ultra320 SCSI controller. Said system boots and runs fine with 4.8-RELEASE (with a slight cosmetic problem during boot that can be cured by building a kernel without eisa support). With STABLE (as of 19 June) the system locks up hard (no response to the keboard) during the

Hi all, We have a server with a LSI 9240-4i controller configured in JBOD with 4 SATA disks. Running FreeBSD 9.1-Beta1: Relevant dmesg: FreeBSD 9.1-BETA1 #0: Thu Jul 12 09:38:51 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (3200.09-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model =

after rebooting I get very often: ... mfi0: COMMAND 0xffffff800132d990 TIMEOUT AFTER 659 SECONDS mfi0: COMMAND 0xffffff800132d990 TIMEOUT AFTER 689 SECONDS mfi0: COMMAND 0xffffff800132d990 TIMEOUT AFTER 719 SECONDS ... another reboot usualy fixes this. danny

Ok, I have been doing a lot of reading and saw many references to samba 2.2.8a and libsmbclient.so and I thought that I would just go ahead and download, compile and install it. After going through configure, the make and make install, I still don't have a libsmbclient.so file to link my program to. I have never come across this before, there has always been a .so file created from any of

Hello all, I would like to perform SVM-RFE (Guyon et al. 2002) in R and have only found one implementation of this algorithm. The function belongs to the MCRestimate package but when I try to use it I encounter a problem - the function appears to be missing a required package or other function that I simply cannot find available anywhere. Here is my session info followed by a simple example

I am experiencing a strange problem where I am randomly getting "file not found" error messages on a Samba share when they are accessed via a series of tcl scripts running from a Win2K server. Some of the scripts are located on the 2K server and some reside on the Samba share. Unfortunately, this is a third party application and I do not know enough tcl to usefully troubleshoot it from

Well this is new. I haven't a clue what Dell has done on this R620, but this popped up today after I did a boat load of BIOS updates and tried to install stable/9 from our yahoo tree. If anyone sees the obvious solution here, I'd love to figure it out. found-> vendor=0x14e4, dev=0x165f, revid=0x00 domain=0, bus=2, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1

Okay, this is probably a stupid question, but here goes: We've got a database server that I'm going to wipe clean and install the latest OS. It's running 2.1 right now, and it has a hardware raid. I've found lots of stuff on software raid tools, but are there any tools on hardware raid? We've got another box, an IBM AS/400, and when one of it's raid disks fail

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Ok, So this is really more of an observation than anything else.? I had a FreeBSD 10.1 server that was running great. Some SSL issue came up, or I upgrade Dovecot in ports - something occurred and the machine started rebooting randomly.? It would run for 2 weeks, then reboot.? It might run for 5 days and then reboot. So I started doing more FreeBSD upgrades, thinking it was a kernel issue. The

>Submitter-Id: current-users >Originator: Spartak Radchenko >Organization: Arguments & Facts Weekly >Confidential: no >Synopsis: dd can't write variable length data blocks to SCSI DDS streamer. >Severity: serious >Priority: high >Category: kern >Class: sw-bug >Release: FreeBSD 4.9-PRERELEASE i386 >Environment: System: FreeBSD corwin.aif.ru 4.9-PRERELEASE

Hi all, is there a known issue with health monitoring on supermicro SuperServer 6010H? (Im primarily interested in temeperature monitoring) I have tried both mbmon and lmmon with the following results: stats# mbmon -d SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!! No Hardware Monitor found!! InitMBInfo: Unknown error: 0 stats# lmmon IOCTL: Operation not supported by

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I