similar to: Intel ICH7 SMBus support, ichsmb(4)

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

I have a problem with an SMP 4.7 kernel with ichsmb. My BIOS has not assigned an interrupt, so the kernel does on startup: ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1100-0x111f irq 0 at device 31.3 on pci0 pci_cfgintr_virgin: using routable interrupt 3 pci_cfgintr: 0:31 INTB routed to irq 3 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose

Hi, How can I load the alpm(4) module for SMBus support on my ASUS Vintage AH-1 system? It appears the I/O range it uses is claimed by the acpi(4) driver. Can I override the mapping in some way i.e. tell ACPI not to claim the range? I don't see anything obvious about this in the acpi(4) man page. thanks, BMS

Hello all, I have problems with enabling support for SMBus on STABLE. My motherboard is ICH3 (82801CA). As suggested in LINT I added 3 lines to my kernel config: device smbus device ichsmb device smb But after compiling, installing and rebooting /dev/smb[01] are not available and no changes in kernel startup messages either. So I

Hello everyone, I'm unable to read temperature Gigabyte H77-DH3H motherboard. Is that motherboard supported or am I doing it incorrectly? When trying to access hw.acpi.thermal everything appears to be ok, but it is not, the system always returns 27,8C and 29,8C which fooled me initially - the values never change. Here is output: [chinatsu]:/root# sysctl hw.acpi.thermal

On Tue, Oct 14, 2008 at 09:52:09PM -0400, John R. Huston wrote: > Hi, I am not very familiar with using mailing lists so if I have made > a mistake in the format or scope of the message please correct me. I > am pretty desperate for an answer by now so any help at all is really > very appreciated. > > I have a Shuttle SD30G2 computer (Specs: >

Sep 21 08:57:54 belle fsck: /dev/ad4s1d: 1 DUP I=190 Sep 21 08:57:54 belle fsck: /dev/ad4s1d: UNEXPECTED SOFT UPDATE INCONSISTENCY; RUN fsck MANUALLY. Ok, so I ran fsck manually (even with -y), but yet it refuses to clear/fix whatever to the questions posed as fsck runs. What does this all mean? Thanks, -Clint -- This message has been scanned for viruses and dangerous content by MailScanner,

By default FreeBSD 7.0 shipped with the sysctls set to: kern.maxfiles: 12328 kern.maxfilesperproc: 11095 We recently bumped up against these limits in an unfortunate way and we are going to raise them. I have some questions: * why are the numbers set the way they are? They aren't round numbers, they aren't powers of 2. But they were arrived at somehow with planning and thought

Hi All, I have a windows 7 as my domU and some windows based drivers are not fully functional (like: touchpad-driver etc ) because they are SMBus based. I was looking at a way to passthrough the SMBus at 00:1f.03 on south bridge ( 00:1f.0), I was debugging at pt-graphics.c and understand that it is detecting the south bridge and passing it through but the other functions for the same dev-id are

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, I have recently bought a new disk (Seagate 500G, ST3500320NS). I have enabled SMART checking using the smartmontools as usual for the disk (/dev/ad6 -a -S on -s (S/../.././03|L/../../7/03) -m root). The problem is that each time the test runs I get messages like the following in /var/log/messages: Oct 26 04:54:15 35 kernel: ad6: TIMEOUT -

One of our FreeBSD boxes has a SCSI controller and disk, which showed problems earlier this week. There was a lot of of chatter from the SCSI driver in /var/log/messages and to the console. However, the console is unattended and we only discovered the problem subsequently because /var/log/console.log didn't show any of the chatter. console.log is otherwise working, and very helpful (e.g. it

Hello, freebsd-stable. Does somebody use some software RAID5 on FreeBSD in real production system? I want to build storage server for my home: RAW photos, multi-layer PhotoShop files and FLAC-encoded music consume a lot of space, and they should be availible both from desktop & notebook. Also, all photo-content is unique, so I need some insuranse from single HDD crash. I understand,

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

(smb.conf attached) When i mount the exported shares on my computer on either it or another machine they get damaged during transfer, for example i made a file in my shared folder with the contents "this is a test", mounted that folder at /mnt/losmb/, resaults below: $ cat /home/share/test this is a test $ cat /mnt/losmb/test J?SMB.?$ $ md5sum /home/share/test && du -s

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.

Hi, I am having periodic sound clicks (2-3 per second) on all FXS of a TDM400P when the remote end is my VoIP provider. However: - recording the conversation on the asterisk, does not have the glitches, although I can hear them on a real phone. - My VoIP provider to my VoIP phones through the same asterisk is OK. - TDM to TDM through the same asterisk is OK. I tried with and without

I''ve been trying for several days to get a xen dom0 booting as described on Boris Derzhavets blog. I have been able to boot Jeremy Fitzhardinge''s pv_ops kernel under xen, but my X server wouldn''t start so I''ve been trying to get Andrew Lyon''s rebased opensuse patches to work. I have asked for help in the freenode ##xen channel but they

Hi, I''ve set up a domU with video card access per the instructions at <http://www.nvnews.net/vbulletin/showthread.php?t=68703>; video is working quite nicely. However, I''m having some trouble getting the USB keyboard and mouse to work. I have a motherboard with onboard USB 2.0, and a USB 1.1 PCI card. The motherboard USB uses several PCI addresses. If I

Hey folks, So what's the word on AHCI and bios drive geometry? I'm having a real pain of a time trying to get some 750gb sata drives running on my FreeBSD7 box in AHCI mode. It doesn't seem to matter what disk geometry I suggest to sysinstall, something complains of an invalid disk upon booting it. Actually, in AHCI mode the bios screen doesn't report any information on

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry