similar to: Bug#500047: xen-utils-3.0.3-1: domU reboot fails when using DRBD as vbd

Control: tags -1 +moreinfo On Wed, 24 Sep 2008 17:19:08 +0200 Valentin Vidic <vvidic at carnet.hr> wrote: > Package: xen-utils-3.0.3-1 > Version: 3.0.3-0-4 > Severity: normal > > > Rebooting from inside domU hangs in initrd: > > Begin: Waiting for root file system... ... > > Root file system is not available because underlying DRBD device > got

Hi, have a debian 5.0 with all patches and xen 4.3.1 (debian repo) installed. If I use a VM with paravirtualizing it works fine. But a full virtualized image doesn''t boot. Message: ---8<--- # xm create deb50.cfg: Error: Device 2049 (vbd) could not be connected. Hotplug scripts not working. ---8<--- That is my deb50.cfg ---8<--- # Debian 5.0 import os, re arch = os.uname()[4]

Hej folks, I''m messing around with DRBD once again but with a new Xen 4.1.2 installation using the XL toolstack instead of the xend daemon. However, after getting my DRBD installed and a device operational, trying to create a domU using the drbd block device doesn''t want to work: xl create -c test.cfg Parsing config file test.cfg Unknown disk type: drbd My config has: disk

I tried to create a domain with drbd based disk as the backend "drbd:<resourcename>,..," and I get a "unknown disk type" error. I can spin out a patch if needed, but just wanted to know apriori if this was left out for any specific reason. shriram _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

Hi all, Where i want to arrive: 1) having two storage server replicating partition with DRBD 2) exporting via GNBD from the primary server the drbd with GFS2 3) inporting the GNBD on some nodes and mount it with GFS2 Assuming no logical error are done in the last points logic this is the situation: Server 1: LogVol09, DRDB configured as /dev/drbd0 replicated to Server 2. DRBD seems to work

Hi, I have a running LVM-DRBD-Xen-HVM/Win2k3 cluster-stack under debian/ lenny managed by heartbeat/crm. At takeover/failover heartbeat first is stopping my HVM-domU with success apparently: -------------- corresponding heartbeat log line ----------------- greatmama-n2 lrmd: [3382]: info: RA output: (xendom_infra_win:stop:stdout) Domain infra-win2003sbs terminated All domains terminated

hi, I was following this wiki http://wiki.centos.org/HowTos/Ha-Drbd for my CentOS 5 installation, but it appears that the kmod-drdb is not for the newest kernel. Would anyone know how long before this is updated? kmod-drbd i686 8.0.6-1.2.6.18_8.1.14.el5 extras kernel i686 2.6.18-8.el5 installed

Hi List, is it possible with the virt-manager to choose a drbd device? Example: 9:testsever Connected Primary/Secondary UpToDate/UpToDate C is running on /dev/sda9 but I can´t use it as a drive. (syntax?) Best, Mike _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi Anyone experienced in DRBD ls it good in using mysql redundant? What is it best to use? Thank you

Hi all, I've been wrestling with a problem with drdb and centos. I have successfully created one drbd resource, but when I try the create a 2nd, I get an error on one of the nodes: Lower device is already mounted. Command 'drbdsetup /dev/drbd1 disk /dev/hdd1 internal -1' terminated with exit code 20 The partition is not mounted from fstab etc and is newly created with parted after

Hi, since I upgraded from Lenny, DRBD VBD scripts not works at all. This config works : disk = [ 'phy:/dev/drbd/by-res/ads-disk,xvda,w' ] But his one doesn't work at all : disk = [ 'drbd:ads-disk,xvda,w' ] I obtain this error : # xm create ads.cfg Using config file "/etc/xen/ads.cfg". Error: Device 51712 (vbd) could not be connected. Hotplug scripts

Is there a fix for this in the works/coming for squeeze or do I have to patch the package myself? If so, how? Thanks, a grateful Debian user that hasn't patched packages yet! Steve -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/attachments/20101122/8433308c/attachment.htm>

Hi, i''ve a problem with drbd 0.7.10 module on an xenU OS (testing). I''ve compiling drbd with "make clean all" then "make install" without error. modprobe drbd OK with no error too and now and trying to start drdb /etc/init.d/drbd start Starting DRBD resources: can not open /dev/drbd0: No such device or address [ d0 can not open /dev/drbd0: No such device

I''m running Xen3 7775 with udev 073 (which was a PITA to get working, as the initrd I''ve been running for quite some time uses an older one -- but that''s an entirely different story). My dom0 is Gentoo-based. When I try to start a DomU, it times out waiting for hotplug-based notification, as per the following: DEBUG (DevController:69) Waiting for devices vif. DEBUG

I''m running Xen3 7775 with udev 073 (which was a PITA to get working, as the initrd I''ve been running for quite some time uses an older one -- but that''s an entirely different story). My dom0 is Gentoo-based. When I try to start a DomU, it times out waiting for hotplug-based notification, as per the following: DEBUG (DevController:69) Waiting for devices vif. DEBUG

Package: xen-utils-common Version: 4.0.0-1 Severity: normal After upgrading xen-utils-common from 3.4.2-4 to 4.0.0-1, I could not create a guest domain defined with a DRBD file type. The xm create command would fail with "Error: Device 51713 (vbd) could not be connected. Hotplug scripts not working.". After some research I realized the /etc/xen/scripts/block-drbd helper script was

hi xen user/dev list, i want to compile drbd 8.4 against kernel mainline 3.0 source and receive an error: my commands: # cd /usr/src/drbd-8.4.0 # ./autogen.sh # ./configure --localstatedir=/var --sysconfdir=/etc --with-km=yes # cd /usr/src/drbd-8.4.0/drbd # make clean # make KDIR=/usr/src/linux-3.0 the error message: *** In file included from include/linux/security.h:25,

hi xen user/dev list, i want to compile drbd 8.4 against kernel mainline 3.0 source and receive an error: my commands: # cd /usr/src/drbd-8.4.0 # ./autogen.sh # ./configure --localstatedir=/var --sysconfdir=/etc --with-km=yes # cd /usr/src/drbd-8.4.0/drbd # make clean # make KDIR=/usr/src/linux-3.0 the error message: *** In file included from include/linux/security.h:25,

I am having the same problem, however on RHEL 2.6.16. I have tried setting up the bridge manually but it does not work. Can someone give some clues on what we should do to solve this problem in RHEL Thanks P. Krishna -------------- Original message -------------- From: Jens Nachtigall <nachtigall@web.de> > I found this at http://julien.danjou.info/xen.html > > Set up the

> -----Original Message----- > From: Ewan Mellor [mailto:ewan@xensource.com] > Sent: Tuesday, December 06, 2005 9:16 AM > To: Dave Thompson (davetho) > Cc: Xen Mailing List > Subject: Re: [Xen-devel] Hotplug scripts not working... > xen/ia64 domU stoppedworking > > On Tue, Dec 06, 2005 at 09:51:24AM -0500, Dave Thompson > (davetho) wrote: > > >