similar to: Interested in helping Nouveau

Hi, I was playing with rspec and every time I find a possible improvement that could be made in spec_helper or rakefile I have to change it in every module that is using rspec tests. So maybe these things could be centralized, I thought to myself. I found the following module, actually. https://github.com/puppetlabs/puppetlabs-module_spec_helper But I am at a lost how to use it. Is it supposed

As far as I know from experience if your motherboard has a bios update that says it supports presler microcode then you''re set. One gotcha is you may need something simple like a celeron d chip to get your motherboard to boot to get the bios update installed. (As the 3 montherboards I''ve seen won''t boot presler chips without bios update. Adam Wendt IPCoast, Inc. On

Still working on the validator buildbot as I can. Now I'm tackling what appears to be a configure problem for llvm-gcc-4.2. Here's the configure log: ../src/configure --prefix=/ptmp/dag/buildbot/slaves/llvm-validate/llvm-validate-release-kentsfield-linux/build/install --program-prefix=llvm-

NV10TCL defines the vertex buffer registers both as arrays and as individual named registers. This causes duplicate register definitions and the individual registers are not used either by the DDX or by the Mesa driver. Francisco Jerez said to remove them all. Signed-off-by: Luca Barbieri <luca at luca-barbieri.com> --- renouveau.xml | 49

puppetlabs_spec_helper is a Rubygem to make writing and running module spec tests using rspec-puppet easier. It includes a set of common rake tasks and a spec_helper that correctly initializes puppet and rspec-puppet for testing. The code is available on github at http://github.com/puppetlabs/puppetlabs_spec_helper. Patches are welcome. To convert a module with existing spec tests to use the

We have an odd situation with a puppet 3 installation. It isnt serving out the module local files. We understand (Somewhat) about the new auth.conf requirements, and have filled those out. So, access to things such as puppet:///files/etc/somefile.conf are working fine. However, attempts to access puppet:///modulename/somefile.conf fail, with (in the case of modulename==java) Error:

Hello everyone, This is Matt Ashland, a developer for J. River, the makers of the popular freeware program Media Jukebox. (some of you may know me better as the author Monkey's Audio). Our development team here at J. River is quite interested in helping with the development of Ogg Vorbis. The licensing restrictions of other formats (namely mp3) are becoming somewhat problematic for us,

Hi Firstly apologies for the spam if you got this email via multiple aliases. I''m trying to document a number of common scenarios where ZFS is used as part of the solution such as email server, $homeserver, RDBMS and so forth but taken from real implementations where things worked and equally importantly threw up things that needed to be avoided (even if that was the whole of ZFS!).

Signed-off-by: Maarten Maathuis <madman2003 at gmail.com> --- src/gallium/drivers/nouveau/nouveau_stateobj.h | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/src/gallium/drivers/nouveau/nouveau_stateobj.h b/src/gallium/drivers/nouveau/nouveau_stateobj.h index 9aee9e4..6c40f64 100644 --- a/src/gallium/drivers/nouveau/nouveau_stateobj.h +++

This patchset applies some minor fixes to renouveau.xml and then unifies the nv30 and nv40 register definitions. nv30 and nv40 are very similar and have the same offsets for the registers they share. The major differences are: 1. Texture setup is different due to full NPOT support on nv40 2. More advanced blending/render targets on nv40 3. NV30 has fixed function registers, which NV40 lacks The

Hello Everyone, I'm trying to run bisect wine 1.3.22 (good) and 1.3.23(bad) for Rayman 3 but i dont know how to use it can someone give ins tructions on how to use it? I tried git bisect start which i got fatal: Not a git repository (or any of the parent directories): .git

7.8 branch (533b7663) : 209/246 master branch (c882c31) : 216/241 In short : 8 fail/warn -> pass 5 fail -> skip 1 pass -> fail So the only regression is glean/clipFlat Output: ---------------------------------------------------------------------- Test clipping with flat shading (provoking vertex). clipFlat: Failure for glBegin/End(GL_QUADS), glFrontFace(GL_CCW) GL_EXT_provoking_vertex

Hello, At the risk of looking like an idiot, I thought I would post because I can't make Koala's script work. My brother has an nVidia GEforce 8800, which nobody has dumped for, so I thought I would try. As I posted here: https://answers.launchpad.net/ubuntu/+question/29595 I am trying to submit a REnouveau dump from my brother's computer. I have installed the latest Ubuntu Hardy

First some data errors I get with both nv20 exa and nv20 dri/mesa. 1. RT_FORMAT LINEAR + X8R8G8B8 Ch 1/5 Class 0x0597 Mthd 0x0208 Data 0x00800080:0x00000105 Ch 1/5 Class 0x0597 Mthd 0x0208 Data 0x01000100:0x00000105 LINEAR + A8R8G8B8 Ch 1/5 Class 0x0597 Mthd 0x0208 Data 0x01000100:0x00000108 Ch 1/5 Class 0x0597 Mthd 0x0208 Data 0x00800080:0x00000108 The only value I found in renouveau dump

http://bugs.freedesktop.org/show_bug.cgi?id=16684 Summary: renouveau runs forever on 8600GS Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

I have some things to add to renouveau.xml (NV50_MEMORY_TO_MEMORY_FORMAT high address words, and NV50COMPUTE object 0x50c0), see the attached patch Greetings, Wladimir -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.freedesktop.org/archives/nouveau/attachments/20071119/f65ec979/attachment.htm -------------- next part -------------- A non-text

Hi, When REnouveau came to "74/75 test_interesting_registers" the CPU used 100% and I could only use the mouse, but not interact witt anything. What could be wrong? I am using GeForce 6150 and Fedora 7. Love, Louise

Hello, I have a dual-GPU card GeForce 7950 GX2 (PCI ID 10de:0294). Unfortunately, I cannot make a dump using renouveau, because the program crashes. The backtrace looks like this: Program received signal SIGSEGV, Segmentation fault. 0x00000000004153af in read_fb_ramin (instanceMem=4, offset=2) at objects.c:4089 4089 return fb[((fb_size - (ramin_block*512*1024) + ramin_inst)/4) +

Hello, I have a Nvidia Riva 128 ZX graphic card. But renouveau need the nvidia proprietary driver to work and there is no nvidia proprietary driver for Riva 128 or Riva 128 ZX. How can I send you informations that can help you to write a free and open source driver for this nvidia graphic chip. At http://users.tkk.fi/~jpakkane/ren/, I found nothing for NV3. But there is some information for NV1

Hello, renouveau has failed on my machine with an integrated GeForce 6150SE (nForce 430) - PCI ID 10de:03d0. detect_devices: Creating probe window failed. We tried to create a window by using SDL. Our OpenGL tests require a stencil buffer whichusually is not available with 16-bit desktop colordepth. If you are using 16-bit colors, please try24-bit instead. Device detection failed. The problem