similar to: Do I have a problem? (longish)

So i''ve inherited this solaris 10 system with a sun storedge attached. pool: tol-pool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tol-pool ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 c1t9d0 ONLINE 0 0 0

1. I have a 4x18GB drive setup as RAIDZ. Now when thinking about it in terms of RAID5 I would expect to get (4-1)x18 worth of drive space, but DF -h shows 4x18. Is this a bug or do I not understand? 2. Once again thinking in RAID5 terms if I have 4X18GB and 12X9GB drives and I want to make a RAIDZ of all of them I would expect the 18GB to be treated at 9GB so the RAIDZ would be 16X9GB. Is

On a V240 running s10u4 (no additional patches), I had a pool which looked like this: <pre> > # zpool status > pool: pool01 > state: ONLINE > scrub: none requested > config: > > NAME STATE READ WRITE CKSUM > pool01 ONLINE 0 0 0 > mirror

Under Solaris 10 u6 , No matter how I configured my ARECA 1261ML Raid card I got errors on all drives that result from SCSI timeout errors. yoda:~ # tail -f /var/adm/messages Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Requested Block: 239683776 Error Block: 239683776 Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Vendor: Seagate

On 9/4/07 4:34 PM, "Richard Elling" <Richard.Elling at Sun.COM> wrote: > Hi Andy, > my comments below... > note that I didn''t see zfs-discuss at opensolaris.org in the CC for the > original... > > Andy Lubel wrote: >> Hi All, >> >> I have been asked to implement a zfs based solution using storedge 6130 and >> im chasing my own

Hi I managed to get my Sun NAS filer to join my Samba domain (2.2.10). However, I cannot mount any of the shares from the NAS to a PC in the same domain, getting an error : 06/21/05 14:15:53 NetrSamLogon[BIOSS\janet]: SAMBA ACCESS_DENIED (Samba PDC) When I asked Sun about it they responded : "Further reseach has shown that a connection to SAMBA domain controller as is not supported by the

I am trying to use Xen with a Sun StorEdge 6130 disk array, but there are some IBM TotalStorage arrays that use the same RDAC driver, so hopefully someone has run across this. The driver will not compile with Xen and newer 2.6 sources/gcc4. At first there are some invalid lvalue assignments to clean up, and a few places where static declarations need to be removed, but I finally get to a point

Hi sorry if this is the wrong place to post but I'm not sure where to go to and I'm a bit desperate. We just brought our Sunfire 6800 server and Storedge 9960 RAID array Solaris 8 back up after some maintenance and everything came back up 'clean' but I cannot get our SAMBA software to recognise any users or directories when logging in remotely from an apple or windows box.

I physically removed a disk (c3t8d0 used by ZFS ''pool01'') from a 3310 JBOD connected to a V210 running s10u3 (11/06) and ''zpool status'' reported this: # zpool status pool: pool01 state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the

Good morning! Sorry if this gets posted twice, I tried via NNTP before, and it didn't seem to work. After having downloaded the tarball for Asterisk addons via FTP from ftp.asterisk.org I am trying to install it following the instructions on http://www.voip-info.org/wiki-Asterisk+addon+asterisk-addons, so far without success. Could somebody maybe advise where I am taking the wrong path?

Hi, I work on a support team for the Sun StorEdge 6920 and have a question about the use of the SCSI sync cache command in Solaris and ZFS. We have a bug in our 6920 software that exposes us to a memory leak when we receive the SCSI sync cache command: 6456312 - SCSI Synchronize Cache Command is flawed It will take some time for this bug fix to role out to the field so we need to understand

How do I find out why df -k is taking soo long to respond only sometimes? -- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?

Anyone out there using small-midsized (2-4 TB) SAN solution among multiple Asterisk systems? I don't have the budget for an EMC-caliber solution, and can't seem to find much else out there. Thanks, Adam The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent

Hello there, I'd like to have iso image version for ultra sparc 64bit. Recently, I downloaded centos version 4.2 beta iso image and installed on SunUltra sparc 64 bit machine. It was hang when it went to the screen " the CentOS 4.2 beta screen, <Tab>/<Alt tab> | <Space> selects | <F12> next screen ". Any idea? Please help. Thanks in advance. Amy on your

Hello everybody, we recently got three Dell PowerEdge servers equipped with Qlogic QLE2462 cards (dual FC 4Gbps ports) and an EMC CLARiiON CX3-40 SAN. The servers with the FC cards were successfully and extensively tested with an older SUN StorEdge T3 SAN. However, when we connect them to the CX3-40, create and mount a new partition and then do something as simple as "tar -C /san -xf

I currently have a 7x1.5tb raidz1. I want to add "phase 2" which is another 7x1.5tb raidz1 Can I add the second phase to the first phase and basically have two raid5''s striped (in raid terms?) Yes, I probably should upgrade the zpool format too. Currently running snv_104. Also should upgrade to 110. If that is possible, would anyone happen to have the simple command lines to

Wouldn''t it be great if the opensolaris community creates a fs fzfs (for flash zfs) that could be the the filesystem for SDXC cards? Two main point for this are already there Sun is a member of SD Card Association and the code writting smart on a flash should be there as well with stuff of l2arc. I think that could give the opensolaris a more visiblie/ markting in the IT space and would