similar to: Zfs best practice for 2U SATA iSCSI NAS

Hello zfs-discuss, What would you rather propose for ZFS+ORACLE - zvols or just files from the performance standpoint? -- Best regards, Robert mailto:rmilkowski at task.gda.pl http://milek.blogspot.com

We have a Mirror setup in ZFS that''s 73GB (two internal disks on a sun fire v440). We currently are going to attach this system to an Equallogic Box, and will attach an ISCSCI LUN from the Equallogic box to the v440 of about 200gb. The Equallogic Box is configured as a Hardware Raid 50 (two hot spares for redundancy). My question is what''s the best approach to moving the ZFS

What is a use case of setting a reservation on the base pool object? Say I have a pool of 3 100GB drives dynamic striped (pool size of 300GB), and I set the reservation to 200GB. I don''t see any commands that let me ever reduce a pool''s size, so how is the 200GB reservation used? Related question: is there a plan in the future to allow me to replace the 3 100GB drives with 2

If anyone is running this configuration, I have some questions for you about Page83 data errors. This message posted from opensolaris.org

Hello zfs-discuss, Just to be sure - if I create ZFS filesystems on snv_39 and then later I would want just to import that pool on S10U2 - can I safely assume it will just work (I mean nothing new to on-disk format was added or changed in last few snv releases which is not going to be in u2)? I want to put right now (I have to do it now) some data on ZFS and later I want to

Hello zfs-discuss, I wonder if ZFS will be able to take any advantage of Niagara''s built-in crypto? -- Best regards, Robert Milkowski mailto:rmilkowski at task.gda.pl http://milek.blogspot.com

The slides from my ZFS presentation at OSCON (as well as some additional information) are available at http://www.meangrape.com/ 2007/08/oscon-zfs/ Jay Edwards jay at meangrape.com http://www.meangrape.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/zfs-discuss/attachments/20070802/f2fa7b08/attachment.html>

This may not be the answer you''re looking for, but I don''t know if it''s something you''ve thought of. If you''re pulling a LUN from an expensive array, with multiple HBA''s in the system, why not run mpxio? If you ARE running mpxio, there shouldn''t be an issue with a path dropping. I have the setup above in my test lab and pull cables

Hi All, ZPOOL / ZFS commands writes EFI label on a device if we create ZPOOL/ZFS fs on it. Is it true ? I formatted a device with VTOC lable and I created a ZFS file system on it. Now which label the ZFS device has ? is it old VTOC or EFI ? After creating the ZFS file system on a VTOC labeled disk, I am seeing the following warning messages. Feb 3 07:47:00 scoobyb

Hi, I have been seeing data corruption on the ZFS filesystem. Here are some details. The machine is running s10 on X86 platform with a single 160Gb SATA disk. (root on s0 and zfs on s7) ...Sanjaya --------- /etc/release ---------- -bash-3.00# cat /etc/release Solaris 10 6/06 s10x_u2wos_09a X86 Copyright 2006 Sun Microsystems, Inc. All Rights

Hi, Segate has released the ST3750640AS 750 GB sata drive. I would like to take two of these and plug in to a the Nvidia Nforce 4 Sata I/F an run Zfs on . ( I have installed SXCR build 40 on a shuttle SNP25 PC last weekend with some install problems I reported in the install-discussionlist ) I there any limitations anywhere in the path to the drive that would

The paragraph below is from ZFS admin guide Traditional Volume Management As described in ?ZFS Pooled Storage? on page 18, ZFS eliminates the need for a separate volume manager. ZFS operates on raw devices, so it is possible to create a storage pool comprised of logical volumes, either software or hardware. This configuration is not recommended, as ZFS works best when it uses raw physical

Hi zfs-discuss, I have some questions about throttling on ZFS 1) I know that throttling is activating while one sync is waiting for another. (http://blogs.sun.com/roller/page/roch?entry=the_dynamics_of_zfs) Is it possible to throttle only selected processes (e.g. nfsd) ? 2) How can I obtain some statistics about it? I want to know how often throttling is activating on my host etc. 3) Is it

hi all, i''ve been using a SAN LUN as the sole member of a zpool with one additional zfs filesystem. this is a flat SAN fabric, so this LUN was available to other systems on the fabric, and one of them came up with "wrong magic number" for several drives, and, as best i can tell, the vtoc for my zpool LUN was over-written on that host via format labeling to correct the error.

Hello zfs-discuss, Relatively low traffic to the pool but sync takes too long to complete and other operations are also not that fast. Disks are on 3510 array. zil_disable=1. bash-3.00# ptime sync real 1:21.569 user 0.001 sys 0.027 During sync zpool iostat and vmstat look like: f3-1 504G 720G 370 859 995K 10.2M misc 20.6M 52.0G 0 0

I''ve hit this bug on four of my Solaris 11 servers. Looking for anyone else who has seen it, as well as comments/speculation on cause. This bug is pretty bad. If you are lucky you can import the pool read-only and migrate it elsewhere. I''ve also tried setting zfs:zfs_recover=1,aok=1 with varying results. http://docs.oracle.com/cd/E26502_01/html/E28978/gmkgj.html#scrolltoc

Does ZFS support any type of remote mirroring? It seems at present my only two options to achieve this would be Sun Cluster or Availability Suite. I thought that this functionality was in the works, but I haven''t heard anything lately. Thanks! Aaron Newcomb http://opennewsshow.org http://thesourceshow.org This message posted from opensolaris.org

Greetings, all. Does anyone have a good whitepaper or three on how ZFS uses memory and swap? I did some Googling, but found nothing that was useful. The reason I ask is that we have a small issue with some of our DBA''s. We have a server with 16GB of memory, and they are looking at moving over databases to it from a smaller system. The catch is that they are moving to 10g. Oracle

hi all, I am hoping to move roughly 1TB of maildir format email to ZFS, but I am unsure of what the most appropriate disk configuration on a 3510 would be. based on the desired level of redundancy and usable space, my thought was to create a pool consisting of 2x RAID-Z vdevs (either double parity, or single parity with two hot-spares). using 300GB drives this would give roughly 2.4TB of usable

Hello zfs-discuss, http://milek.blogspot.com/2007/04/hw-raid-vs-zfs-software-raid-part-iii.html -- Best regards, Robert Milkowski mailto:rmilkowski at task.gda.pl http://milek.blogspot.com