similar to: recommends on CentOS + Via Epia CN10000EG

Hello list, i?m looking forward to buy a new server. It should be low voltage so i?m thinking of a via eden processor like this one -> http://tinyurl.com/3ymlkl (sorry, there?s only a german page). Has someone expierence in using a via eden processsor? Thanks! Kamill

Hi, I'm working with svn trunk rev 815, testing tripplite_usb with this model. I haven't gotten far in my testing, but thought I'd notify the list of this error message. Is this message of any consequence, and is it worthwhile for me to continue testing prior to resolving this? I am happy to help debug any driver issues, so please let me know if I can be of assistance. My platform

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Hi. What imapd can you recommend for minimum configuration and maintenance (no Cyrus)? This is for a small shop, so no hard performance requirements. I'd prefer one where I don't have to build my own packages (no Courier, unless packages exist). Thanks. Morten

Is that a bios setting (I don't recall seeing it) or an OS setting? I run a lot of Via C3 machines (they are so nifty) but don't remember seeing this. -----Original Message----- From: Technical Support [mailto:support@ocg.ca] Sent: Tuesday, September 06, 2005 10:43 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion'; shmaltz@gmail.com Subject: RE: [Asterisk-Users]

I''m using RSpec on Rails and would like to clean up the backtraces, so I went looking for an RSpec equivalent to ThoughtBot''s Quiet Backtrace gem<http://thoughtbot.com/projects/quietbacktrace>. I found Spec::Runner::QuietBacktraceTweaker in the RDOCS, but I can''t figure out how to use it. Can I add something to spec_helper.rb that will utilize

Hello AstLinux seems quite suited for my use. Can you configure more incoming port via a web interface? I'd like to install it to a "normal" hdd. Can that cause any problems? BR Amund Nygaard -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Kristian Kielhofner Sendt: 4. juli 2005 03:23 Til:

I have written a step-by-step setup for installing Asterisk on Debian using the VIA EPIA M platform. It is oriented to the Linux novice (myself being one). Feel free to use it :) http://www.steady-com.com/asterisk/debian-install.html

Is there any problems using this board? I have a dead board in a Book-PC (board size 10.5"x6") so am looking for a new board. Actually I want 2 LAN ports. 'Router' boards with enough umph to run Centos are expensive. I can pick up a VIA epia-m with 512Mb memory for $70 including shipping, so this is rather attractive option. I do have a 100Mb low-height PCI board that I

I'm trying to boot linux on a VIA EPIA-M board (a Nehemiah-based M10000), and I'm having some trouble with it. I'm watching the network transactions with ethereal, and I'm seeing a failure at what appears to be the tftp stage. The M10000 picks up its IP address from the dhcp server (ISC DHCP3), and reports it correctly on the screen. Then the tftp session starts, and I get the

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

Hello I am using a VIA Epia ME6000 with a 600MHz Eden Fanless CPU. Is this likely to be enough power for a 8 extension system with 6 external pstn lines? How important is cpu? Is there some measure, eg xMHz CPU per extension or something benchmark? I have installed 512MB memory - again any benchmark for asterisk memory usage? Angus

In asterisk 1.2 branch SVN 51363 zaptel svn 1980 libpri svn 393 addons svn 332 My equipment is a Via EPIA minit-itx CN10000 1.2ghz, 1gb ram and a tdm400p (4fxo). A call comes from zap, a SIP ulaw receives the call, talks for a while and when SIP users tries to park the call, then dozens of... WARNING[3853]: channel.c:781 channel_find_locked: Avoided initial deadlock for '0x91bb840', 10

This is kind of a two part question. Question One: I want to be sure that an Order model is protecting sensitive attributes from mass assignment. The example looks like this: describe Order do it "should protect total attribute from mass assignment" do @order = Order.new(:total => 0.05) @order.total.should_not == 0.05 end end And the code to implement it: class Order

> Date: Sun, 19 Sep 2004 12:59:52 -0600 > From: Rich Adamson <radamson@routers.com> > Subject: [Asterisk-Users] Re: [Asterisk-Dev] X100p on VIA EPIA-V > problems > To: asterisk-users@lists.digium.com > Message-ID: <Chameleon.1095617288.adar0@vegas> > Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-1 > > > I'm running Asterisk on my (new) VIA EPIA-V

Hi, I'm using Kubuntu and have a problem with the ISOLINUX CDROM booter with versions used since (K)Ubuntu 7.04. The ISOLINUX booter versions 3.36 and 3.53 do not boot my motherboard. The version shipped with Ubuntu 7.04 is I believe ISOLINUX 3.31 but it displays for such a short time I could be wrong. I'm writing to this mail list in case the original Ubuntu bug report never made it

Hello list, after spending the best part of an afternoon trying to build Asterisk on an old EPIA VIA C3, I thought that writing a tutorial would make life easier for future compilers: http://astrecipes.net/index.php?n=356 I had never compiled Asterisk for a different architecture, and I'm pretty disappointed at how complex it is - building Zaptel, Libpri and Asterisk requires

I use them with just the one NIC card. I don't use them as a router so the phones and my gateway are all on the same network. -Jonathan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Remco Barende Sent: Tuesday, September 06, 2005 4:33 PM To: Asterisk Users Mailing List - Non-Commercial Discussion

Hello! In spite of a number of complaints, I have tried to use a TDM400 on a Via EPIA-MII motherboard with a 1.2GHz C3 CPU. cpuinfo and interrupts are included at the end of this e-mail. I have had no problems with it so far that I can attribute to the computer. I have, though, had continual problems with a certain telephone... Anyway, this module currently has 3 x FXS modules and 1 x

I have just had delivered a new HP Proliant server and it is based on an Intel Xeon 2.8GHz processor. On site already we have an Acer Altos G310 with a P4 2.8GHz processor. The new HP server was destined for another site with about 30 persons to service some simple file and print sharing and to manage their email (postfix + MailScanner). The Acer is hosting our Intranet, file and print sharing