similar to: zpool version 3 & Uberblock version 9 , zpool upgrade only half succeeded?

Hello, I have been asked to take a look at at poll on a old OSOL 2009.06 host. It have been left unattended for a long time and it was found in a FAULTED state. Two of the disks in the raildz2 pool seems to have failed, one have been replaced by a spare, the other one is UNAVAIL. The machine was restarted and the damaged disks was removed to make it possible to access the pool without it hanging

I would like to pick the brains of the ZFS experts on this list: What would you do next to try and recover this zfs pool? I have a ZFS RAIDZ1 pool named bank0 that I cannot import. It was composed of 4 1.5 TiB disks. One disk is totally dead. Another had SMART errors, but using GNU ddrescue I was able to copy all the data off successfully. I have copied all 3 remaining disks as images using

After multiple power outages caused by storms coming through, I can no longer access /dev/zvol/dsk/poolname, which are hold l2arc and slog devices in another pool I don''t think this is related, since I the pools are ofline pending access to the volumes. I tried running find /dev/zvol/dsk/poolname -type f and here is the stack, hopefully this someone a hint at what the issue is, I have

Hello, I''ve been using Nexentastore Community Edition with no issues now for a while now, however last week I was going to rebuild a different system so I started to copy all the data off that to my to a raidz2 volume on me CE system. This was going fine until I noticed that they copy was stalled, as well as the entire system was non-responsive. I let it sit for several hours with no

Hi all, Please can you help with my ZFS troubles: I currently have 3 x 400 GB Seagate NL35''s and a 500 GB Samsung Spinpoint in a RAIDZ array that I wish to expand by systematically replacing each drive with a 750 GB Western Digital Caviar. After failing miserably, I''d like to start from scratch again if possible. When I last tried, the replace command hung for an age, network

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

Hi, I have lost a ZFS volume and I am hoping to get some help to recover the information ( a couple of months worth of work :( ). I have been using ZFS for more than 6 months on this project. Yesterday I ran a "zvol status" command, the system froze and rebooted. When it came back the discs where not available. See bellow the output of " zpool status", "format"

Not sure what the best list to send this to is right now, so I have selected a few, apologies in advance. A couple questions. First I have a physical host (call him bob) that was just installed with b134 a few days ago. I upgraded to b145 using the instructions on the Illumos wiki yesterday. The pool has been upgraded (27) and the zfs file systems have been upgraded (5). chris at bob:~# zpool

Not sure what the best list to send this to is right now, so I have selected a few, apologies in advance. A couple questions. First I have a physical host (call him bob) that was just installed with b134 a few days ago. I upgraded to b145 using the instructions on the Illumos wiki yesterday. The pool has been upgraded (27) and the zfs file systems have been upgraded (5). chris at bob:~# zpool

Hi, more than a year ago I created a mirrored ZFS-Pool consiting of 2x1TB HDDs using the OSX 10.5 ZFS Kernel Extension (Zpool Version 8, ZFS Version 2). Everything went fine and I used the pool to store personal stuff on it, like lots of photos and music. (So getting the data back is not time critical, but still important to me.) Later, since the development of the ZFS extension was

I had a single spare 500GB HDD and I decided to install a FreeBSD file server in it for learning purposes, and I moved almost all of my data to it. Yesterday, and naturally after no longer having backups of the data in the server, I had a controller failure (SiS 180 (oh, the quality)) and the HDD was considered unplugged. When I noticed a few checksum failures on `zfs status` (including two on

(From the README) # Jeb Campbell <jebc at c4solutions.net> NOTE: This is last resort if you need your data now. This worked for me, and I hope it works for you. If you have any reservations, please wait for Sun to release something official, and don''t blame me if your data is gone. PS -- This worked for me b/c I didn''t try and replace the log on a running system. My

I have a ZFS pool that has been corrupted. The pool contains a single device which was actually a file on UFS. The machine was accidentally halted and now the pool is corrupt. There are (of course) no backups and I''ve been asked to recover the pool. The system panics when trying to do anything with the pool. root@:/$ zpool status panic[cpu1]/thread=fffffe8000758c80: assertion failed:

One of our Solaris 10 update 3 servers paniced today with the following error: Sep 18 00:34:53 m2000ef savecore: [ID 570001 auth.error] reboot after panic: assertion failed: ss != NULL, file: ../../common/fs/zfs/space_map.c, line: 125 The server saved a core file, and the resulting backtrace is listed below: $ mdb unix.0 vmcore.0 > $c vpanic() 0xfffffffffb9b49f3() space_map_remove+0x239()

I had the rpool with two sata disks in the miror. Solaris 10 5.10 Generic_141415-08 i86pc i386 i86pc Unfortunately the first disk with grub loader has failed with unrecoverable block write/read errors. Now I have the problem to import rpool after the first disk has failed. So I decided to do: "zpool import -f rpool" only with second disk, but it''s hangs and the system is

I was messing around with a ramdisk on a pool and I forgot to remove it before I shut down the server. Now I am not able to mount the pool. I am not concerned with the data in this pool, but I would like to try to figure out how to recover it. I am running Nexenta 3.0 NCP (b134+). I have tried a couple of the commands (zpool import -f and zpool import -FX llift) root at

Hi, I just had my Dell R610 reboot with a kernel panic when I threw a couple of zfs clone commands in the terminal at it. Now, after the system had rebooted zfs will not import my pool anylonger and instead the kernel will panic again. I have had the same symptom on my other host, for which this one is basically the backup, so this one is my last line if defense. I tried to run zdb -e

Hi, Is there anything known about ZFS under 10.0-BETA4 when FreeBSD was upgraded from 9.2-RELEASE? I have two servers, with very different hardware (on is with soft raid and the other have not) and after a zpool upgrade, no way to get the server booting. Do I miss something when upgrading? I cannot get the error message for the moment. I reinstalled the raid server under Linux and the other

Hello all, I have an oi_148a PC with a single root disk, and since recently it fails to boot - hangs after the copyright message whenever I use any of my GRUB menu options. Booting with an oi_148a LiveUSB I had around since installation, I ran some zdb traversals over the rpool and zpool import attempts. The imports fail by running the kernel out of RAM (as recently discussed in the list with