similar to: LiveCD problem on IBM BladeCenter remote console ?

Has any one install CentOS 3.3 or early on a IBM BladeCenter eServers (HS20) Phillip James System Administrator The Garden City Group, Inc. 105 Maxess Road Melville, NY 11747-3836 Phone: (631) 470-5044 Fax: (631) 940-6561 E-mail: Phillip.James at GardenCityGroup.com ==================================================== This communication (including any attachments) is intended for the use of the

Hello, I have CentOS 5.2 installed on two of the afore-mentioned blades. I've noticed that the OS started to crash lately (kernel panic) and I've been assigned the task to troubleshoot this issue. I would like to know what is the best way of recovering the kernel dump after the OS crashes. I know there are two software implementations that would enable me to do this, kexec and

Greetings, We have purchased an IBM BladeCenter and I am in the process of testing Linux installation on these things (boot off SAN i.e. qla2300 driver, not using internal drives). My distro of choice is Debian, however, since I'm really not interested in trying to hand compile all the drivers, I decided to try CentOS (which I'm so far very impressed with). On boot, as with the

Hi all, Sorry for the OT. Does anyone can share to how to reset an IBM Bladecenter Advance Management Module web access? Recently, I've got an IBM Bladecenter chassis E 8677. There's no one in the office who knows about the IP nor the password for it. Thank you, -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 13:10:54 up 5:02, 2.6.24-18-generic

Hello list, when using Xen on our Bladecenter with the advanced management module everything works fine, but as soon as I switch the KVM to another blade and then switch back to xen machine, vga output is unavailable (due to wrong resolution or hz frequency? But it works if I don''t switch away). The machine itself works, only vga output is gone after switching kvm away from the box.

Has anyone accessed Xen or the dom0 Linux serial console on the virtual serial port of a Bladecenter blade via Serial-over-LAN? Was able to see bios boot screen and access grub boot menu, but only the first few characters of the kernel boot sequence are shown, then nothing. Rich _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

thanks for the head up. what os are you running on the blades?? Phillip James System Administrator The Garden City Group, Inc. 105 Maxess Road Melville, NY 11747-3836 Phone: (631) 470-5044 Fax: (631) 940-6561 E-mail: Phillip.James at GardenCityGroup.com ==================================================== This communication (including any attachments) is intended for the use of the intended

Hi, I'm just wondering if I can run "R" software on IBM BladeCenter JS20 PowerPC 970 based now. If it's not available, do you have any plan to port it for JS20? Both Red Hat Enterprise Linux AS3 and SUSE Linux Enterprise Server 8/9 are available on JS20. Thanks.

Hi, We are trying to set up XEN testbed on Thamesblue Supercomputer which has IBM JS20 Blades. I compiled the SLOF firmware from the source on one of the blade. The compilation went smooth and generated the following binaries *boot_rom.bin boot_rom_bimini.bin* When we try to flash boot_rom.bin firmware binary then we get the following error: * update_flash: RTAS: validate() Invalid candidate

Hi, We are trying to set up XEN testbed on Thamesblue Supercomputer which has IBM JS20 Blades. I compiled the SLOF firmware from the source on one of the blade. The compilation went smooth and generated the following binaries *boot_rom.bin boot_rom_bimini.bin* When we try to flash boot_rom.bin firmware binary then we get the following error: * update_flash: RTAS: validate() Invalid candidate

Hello, I have the same error, server is auto rebooted during every boot with kernel XEN, HS20 with Debian Wheezy and XEN hang on and AMM managment show same errors described in previous mails. With Debian wheezy wit non-xen kernel boots correcte, it seems that problems is with xen kernel Same Server HS20 with Debian Lenny+ XEN 3.2 or Debian Squeeze+XEN 4.0 working perfect Upgraded to Debian

Hello, Hi have the same problem. How did you solve it? Thanks Nuno Fernandes On Wednesday 09 May 2007 16:25:09 Bjoern Metzdorf wrote: > Hello Mark, > > > How is this manifesting? Does the bladecentre just grumble at you, do > > you get garbage output or something else? > > No, it just display the standard message that there is no vga output > (blade may be offline

Hi, although i've search the archives, there are questions left regarding backup strategies and errors that occur. I'm using dovecot 2.3.11.3 with mdbox (mailbox size 50MB - 30GB). Every night, i ran the following command: doveadm -o mail_fsync=never -o plugin/quota= -o plugin/zlib_save=gz \ backup -u account mdbox:/nfs/storage/account/mdbox ### incremental backup Thanks to zlib

I have an intermittent problem with my Dell blades, out of 80 blades 69 of them kickstarted Centos 6 fine using PXE The other 11, I get a c0t0 not found error (indicating it is not finding the local disk on the blade). I can remote mount the iso image and do a basic install of centos on these blades, but when I go to do a pxe boot it gives me that error again. I have googled the issue and

On 04/20/2017 05:55 PM, Warren Young wrote: > ... I find that most hardware is ready to fall over by the time the > CentOS that was installed on it drops out of support anyway. > ... James' point isn't the hardware cost, it's the people cost for retraining. In many ways the Fedora treadmill is easier, being that there are many more smaller jumps than the huge leap from C6

Hi all, I have problem with my servers. I use two of HP Blade Servers and RHEL 4.6 installed on them, and have IBM DS4700 connected to them. In those servers are running RHCS (Red Hat Cluster Suite) with GFS for handling Oracle Database. Yesterday, I had missing one partition from the storage, suddenly. I called IBM and they suggested to use RDAC. The question is, Why should use IBM RDAC for

The subject says it all. I'm using rocks cluster software to startup a small blade cluster in my lab. The blades I have redboot installed on them. I am able to boot any client that has pxeboot capability using my setup, except for these blades. My thoughs were using redboot commands to do the following: 1. load -v -r -b 0x8000000 -h 10.1.1.1 pxelinux.0 2. start This however caused my

Hello, We have R working with Rmpi/openmpi, but I'm a little worried. Specifically, (a) the -np flag doesn't seem to override the hostfile (it works fine with fortran hello world) and (b) I appear to have twice as many processes running as I think I should. Rmpi version 0.5.5 Openmpi version 1.1 Viglen HPC with (effectively) 9 blades and 8 nodes on each blade. myhosts file contains

I have a large set of Dell 620 blades fully populated with memory and duel socket CPUs, Centos6.4 image. I have a kickstart that I am using to pxe boot 36 blades. I have two internal drives which are raid1 (two disks formed into one, no redundancy), not san attached In the first set, 9 successfully completed. 7 more built correctly after trying another pxe boot. 2 just wont pxeboot In the

Hi there. I got myself a pair of old Intel Xeon blades, which I plan to repurpose with CentOS. The model is : HP bl20p-g3 server blade Manual http://h18004.www1.hp.com/products/quickspecs/12322_ca/12322_ca.pdf Now, the main problem with this hardware is that LVD UW SCSI HDDs are hard to find and hella expensive if you find em (and of reduced capacity). Any of you know: 1. If there's any