similar to: ATA UDMA data parity error

After applying 125205-07 on two X4500 machines running Sol10U4 and removing "set sata:sata_func_enable = 0x5" from /etc/system to re-enable NCQ, I am again observing drive disconnect error messages. This in spite of the patch description which claims multiple fixes in this area: 6587133 repeated DMA command timeouts and device resets on x4500 6538627 x4500 message logs contain multiple

Hello zfs-discuss, One of a disk started to behave strangely. Apr 11 16:07:42 thumper-9.srv sata: [ID 801593 kern.notice] NOTICE: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1: Apr 11 16:07:42 thumper-9.srv port 6: device reset Apr 11 16:07:42 thumper-9.srv scsi: [ID 107833 kern.warning] WARNING: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1/disk at 6,0 (sd27): Apr 11 16:07:42 thumper-9.srv

Hello, I''ve been using Nexentastore Community Edition with no issues now for a while now, however last week I was going to rebuild a different system so I started to copy all the data off that to my to a raidz2 volume on me CE system. This was going fine until I noticed that they copy was stalled, as well as the entire system was non-responsive. I let it sit for several hours with no

Hi all, First, I''ll say my intent is not to spam a bunch of lists, but after posting to opensolaris-discuss I had someone communicate with me offline that these lists would possibly be a better place to start. So here we are. For those on all three lists, sorry for the repetition. Second, this message is meant to solicit help in diagnosing the issue described below. Any hints on

Hiya, Is there any reason (and anything to worry about) if disk target IDs don''t start at 0 (zero). For some reason mine are like this (3 controllers - 1 onboard and 2 PCIe); AVAILABLE DISK SELECTIONS: 0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> /pci at 0,0/pci10de,cb84 at 5/disk at 0,0 1. c8t1d0 <ATA -ST9160314AS -SDM1

(From the README) # Jeb Campbell <jebc at c4solutions.net> NOTE: This is last resort if you need your data now. This worked for me, and I hope it works for you. If you have any reservations, please wait for Sun to release something official, and don''t blame me if your data is gone. PS -- This worked for me b/c I didn''t try and replace the log on a running system. My

Every day we see pause times of sometime 60 seconds to read 1K of a file for local reads as well as NFS in a test setup. We have a x4500 setup as a single 4*( raid2z 9 + 2)+2 spare pool and have the files system mounted over v5 krb5 NFS and accessed directly. The pool is a 20TB pool and is using . There are three filesystems, backup, test and home. Test has about 20 million files and uses 4TB.

I''ve been trying to get either smartctl or sg3_utils to report properly. They both have the same low-level problems which leads me to suspect either I''m doing something wrong OR there is a problem in the marvell88sx / sd / SATA etc framework. I can access drive name/serial number of all drives on the SAT2 card and the temperature is returned from the IE log page on my two

I have an odd setup at present, because I''m testing while still building my machine. It''s an Intel Atom D510 mobo running snv_134 2GB RAM with 2 SATA drives (AHCI): 1: Samsung 250GB old laptop drive 2: WD Green 1.5TB drive (idle3 turned off) Ultimately, it will be a time machine backup for my Mac laptop. So I have installed Netatalk 2.1.1 which is working great. Read

Hi, Yesterday I got all my disks in two zpool disconected. They are not real disks - LUNS from StorageTek 2530 array. What could that be - a failing LSI card or a mpt driver in 2009.06? After reboot got four disks in FAILED state - zpool clear fixed things with resilvering. Here is how it started (/var/adm/messages) Feb 23 12:39:03 nexus scsi: [ID 365881 kern.info] /pci at 0,0/pci10de,5d at

I was messing around with a ramdisk on a pool and I forgot to remove it before I shut down the server. Now I am not able to mount the pool. I am not concerned with the data in this pool, but I would like to try to figure out how to recover it. I am running Nexenta 3.0 NCP (b134+). I have tried a couple of the commands (zpool import -f and zpool import -FX llift) root at

Hi, I hope there''s someone here who can possibly provide some assistance. I''ve had this read problem now for the past 2 months and just can''t get to the bottom of it. I have a home snv_111b server, with a zfs raid pool (4 x Samsung 750GB SATA drives). The motherboard is a ASUS M2N68-CM (4 SATA ports) with an Athlon LE1620 single core CPU and 4GB of RAM. I am using it

I have a zpool which has grown "organically". I had a 60Gb disk, I added a 120, I added a 500, I got a 750 and sliced it and mirrored the other pieces. The 60 and the 120 are internal PATA drives, the 500 and 750 are Maxtor OneTouch USB drives. The original system I created the 60+120+500 pool on was Solaris 10 update 3, patched to use ZFS sometime last fall (November I believe). In

This must be resliver day :) I just had a drive failure. The hot spare kicked in, and access to the pool over NFS was effectively zero for about 45 minutes. Currently the pool is still reslivering, but for some reason I can access the file system now. Resliver speed has been beaten to death I know, but is there a way to avoid this? For example, is more enterprisy hardware less susceptible to

Hello, I have a dual boot with Windows 7 64 bit enterprise edition and Opensolaris build 134. This is on Sun Ultra 40 M1 workstation. Three hard drives, 2 in ZFS mirror, 1 is shared with Windows. Last 2 days I was working in Windows. I didn''t touch the hard drives in any way except I once opened Disk Management to figure out why a external USB hard drive is not being listed.

Just look at this. I thought all the restarting resilver bugs were fixed, but it looks like something odd is still happening at the start: Status immediately after starting resilver: # zpool status pool: rc-pool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine

I''m looking at the newly-orderable (via Sun) STEC Zeus SSDs, and they''re outrageously priced. http://www.stec-inc.com/product/zeusssd.php I just looked at the Intel X25-E series, and they look comparable in performance. At about 20% of the cost. http://www.intel.com/design/flash/nand/extreme/index.htm Can anyone enlighten me as to any possible difference between an STEC

While testing a zpool with a different storage adapter using my "blkdev" device, I did a test which made a disk unavailable -- all attempts to read from it report EIO. I expected my configuration (which is a 3 disk test, with 2 disks in a RAIDZ and a hot spare) to work where the hot spare would automatically be activated. But I''m finding that ZFS does not behave this way

hello, all I am have constraint disk space (only 8GB) while running os inside vm. Now i want to add more. It is easy to add for vm but how can i update fs in os? I cannot use autoexpand because it doesn''t implemented in my system: $ uname -a SunOS sopen 5.11 snv_111b i86pc i386 i86pc If it was 171 it would be grate, right? Doing following: o added new virtual HDD (it becomes

Hi! I tried to add an other FiweFire Drive to my existing four devices but it turned out, that the OpenSolaris IEEE1394 support doen''t seem to be well-engineered. After not recognizing the new device and exporting and importing the existing zpool, I get this zpool status: pool: tank state: DEGRADED status: One or more devices could not be used because the label is missing or