similar to: ZFS problem after disk faliure

Already making use of it, thank you! http://www.justinconover.com/blog/?p=17 I took 6x250gb disk and tried raidz2/raidz/none # zpool create zfs raidz2 c0d0 c1d0 c2d0 c3d0 c7d0 c8d0 df -h zfs Filesystem size used avail capacity Mounted on zfs 915G 49K 915G 1% /zfs # zpool destroy -f zfs Plain old raidz (raid-5ish) # zpool create zfs raidz c0d0

As mentioned last night, we''ve been reviewing a proposal for hot spare support in ZFS. Below you can find a current draft of the proposed interfaces. This has not yet been submitted for ARC review, but comments are welcome. Note that this does not include any enhanced FMA diagnosis to determine when a device is "faulted". This will come in a follow-on project, of which some

Hey, I''m currently running on Nexenta alpha 6 and I have some corrupted data in a pool. The output from sudo zpool status -v data is: pool: data > state: ONLINE > status: One or more devices has experienced an error resulting in data > corruption. Applications may be affected. > action: Restore the file in question if possible. Otherwise restore the > entire

I''ve got knee deep into learning how to use Opensolaris and zfs, and I see now that my goal of home zfs server may have been better served if I had partitioned the install disk leaving some of the 60GB to be added to a zpool. First, how much space does a working OS need. I don''t mean bare minimum but to be comfortable and have some growing room (on the install disk)?

I''ve installed Open Solaris 2009.06 on a machine with 5 identical 1TB wd green drives to create a ZFS nas. The intended install is one drive dedicated to the OS and the remaining 4 drives in a raidz1 configuration. The install is working fine, but creating the raidz1 pool and rebooting is causing the machine report "Cannot find active partition" upon reboot. Below is command

I''m not sure exactly what happened with my box here, but something caused a hiccup on multiple sata disks... May 9 16:40:33 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci10de,5c at 9/pci-ide at a/ide at 0 (ata6): May 9 16:47:43 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci-ide at 7/ide at 1 (ata3): May 9 16:47:43 sol timeout: abort request, target=0

Being resilvered 444.00 GB 168.21 GB 158.73 GB Just wondering if anyone has any rough guesstimate of how long this will take? It''s 3x1200JB ata drives and one Seagate SATA drive. The SATA drive is the one that was replaced. Any idea how long this will take? As in 5 hours? 2 days? I don''t see any way to get a status update on where it''s at in the reslivering

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

Hi all, Please can you help with my ZFS troubles: I currently have 3 x 400 GB Seagate NL35''s and a 500 GB Samsung Spinpoint in a RAIDZ array that I wish to expand by systematically replacing each drive with a 750 GB Western Digital Caviar. After failing miserably, I''d like to start from scratch again if possible. When I last tried, the replace command hung for an age, network

i''ve got a little zpool with a naughty raidz vdev that won''t take a replacement that as far as i can tell should be adequate. a history: this could well be some bizarro edge case, as the pool doesn''t have the cleanest lineage. initial creation happened on NexentaCP inside vmware in linux. i had given the virtual machine raw device access to 4 500gb drives and 1 ~200gb

Help! I have 10 nodes: Ocfs2 1.2.4 RHEL4 U4 (AMD64) Kernel 2.6.9-42.ELsmp While running fsck.ocfs2 I am getting a lot of these. o2fsck_mark_cluster_allocated: Internal logic faliure !! duplicate cluster <bunch of numbers> Then I get a deluge of "Bad magic number in inode while trying to verify the type of directory entry <filename>" Is fsck failing to

Hi Sarah Thank you very much for your pointers. Is there a way to specify the date string as POSIXct when reading in? I have tried the following (very inelegant way) and still have no luck. --- Begin Code --- # 1st read in the spreadsheet with stringsAsFactors set to FALSE > abc <- read.csv("gntr1.csv", header=TRUE, stringsAsFactors=FALSE) > abc code tasks.labels

Hi, Your attempt didn't work because you didn't do what I suggested, which was make sure that your data frame matched the example given in the help for gantt.chart. Here's what you have: > str(cdfg) 'data.frame': 3 obs. of 3 variables: $ c1d1: Factor w/ 3 levels "task 1","task 3",..: 1 3 2 $ c2d1: POSIXct, format: "2018-04-01"

Hi, The help file for gantt.chart states that dates must be in POSIXct format, and the example shows how to do that. There's no reason that I can see that you can't use a data frame as input to gantt.chart, but you need to be very careful that your data frame matches the correct format. I bet also that your character fields were imported as factors, because you didn't specify not to.

Hello the list, I thought that it should be easy to do a clone (not in the term of zfs) of a disk with zpool. This manipulation is strongly inspired by http://www.opensolaris.org/jive/thread.jspa?messageID=135038 and http://www.opensolaris.org/os/community/zfs/boot/ But unfortunately this doesn''t work, and we do have no clue what could be wrong on c1d0 you have a zfs root create a

Hi all! I''ve decided to take the "big jump" and build a ZFS home filer (although it might also do "other work" like caching DNS, mail, usenet, bittorent and so forth). YAY! I wonder if anyone can shed some light on how long a pool scrub would take on a fairly decent rig. These are the specs as-ordered: Asus P5Q-EM mainboard Core2 Quad 2.83 GHZ 8GB DDR2/80 OS: 2 x

>From the help file for plotrix: " ... x - a list of task labels, start/end times and task priorities as returned by get.gantt.info ..." So I try to create an object that will contain this information. abc <- read.csv("gntr1a.csv") # The above csv file was generated from MS .xlsx file containing the tasks and corresponding dates > abc code tasks.labels

Always Learning wrote: > >> Used a VCR or Cassette Player lately? > > My VCR broke. Replaced it with a DVD/HDD & USB3 unit. Replaced cassette > player and tape recorders with broadcast quality handheld recorder > DR-100mk3 and an amazingly good Sony PX440. But how do you play all your old VCR tapes? As I said, I want to burn them to disk, but I still have a working VCR.

On 02/13/2017 11:36 AM, peter.winterflood wrote: > On 13/02/17 16:49, James Hogarth wrote: >> On 13 February 2017 at 16:17, peter.winterflood >> <peter.winterflood at ossi.co.uk> wrote: >>> >>> >>> there's a really good solution to this. >>> >>> yum remove NetworkManager* >>> >>> chkconfig network on

Hello! I'm trying to build pjsip library with opus codec. And when I'm trying to package an app I receive errors about "bands.o": in /var/folders/dj/njldlc3s2hldwxtbgw26zwd80000gn/T/96371209-c2d0-41e1-866d-388b6d47c6e7/libadagio.anes.sip.a(bands.o), archive member 'bands.o' with length 84496 is not mach-o or llvm bitcode for architecture arm64